YB/T 115-2004 PDF English
US$90.00 · In stock · Download in 9 secondsYB/T 115-2004: Silica fume for unshaped refractory Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Obsolete YB/T 115: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| YB/T 115-2004 | English | 90 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Silica fume for unshaped refractory
| Obsolete |
| YB/T 115-1997 | English | 239 |
Add to Cart
|
2 days
|
Silica fume for unshaped refractory
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: YB/T 115-2004
YB/T 115-2004: Silica fume for unshaped refractory---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/YBT115-2004
YB
METALLURGY INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 71.060.20
D 52
Replacing YB/T 115-1997
Silica fume for unshaped refractory
Issued by. National Development and Reform Commission
Issued on: JUNE 17, 2004
Implemented on: NOV 01, 2004
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Designations ... 5
4. Technical Requirements ... 5
5 Test Methods ... 5
6 Inspection Rules ... 6
7 Packaging, Marking, Transport, Storage and Quality Certificates ... 7
Annex A ... 8
Foreword
This Standard replaces YB/T 115-1997 Silica Fume for Unshaped Refractory.
Compared with YB/T 115-1997, the main changes of this Standard are as follows.
- Modify the second paragraph of scope;
- Add the notations for designations; use designations to replace the grade of the
previous standard;
- Adjust the reference standards in the previous standard; add the reference standard
GB/T 9724;
- Adjust the indexes of calcium-magnesium, potassium-sodium and loss on ignition of
the previous standard;
- Change the batch in the previous standard from “10t/batch” into “20t/batch”;
- Change the factory-exit inspection of the previous standard from 6 items to 5 items.
Annex A of this Standard is normative.
This Standard was proposed by China Iron and Steel Association.
This Standard shall be under the jurisdiction of China Metallurgical Information and
Standard Institute.
Drafting organizations of this Standard. Tianjin Chaoyang Refractory Factory, and China
Metallurgical Information and Standard Institute.
Main drafters of this Standard. Xu Daxiong, Chen Zhiqiang, and Gao Jianping.
This Standard was first-time released in 1997.
Silica Fume for Unshaped Refractory
1 Scope
This Standard specifies the designations, technical requirements, test methods, packaging,
marking, storage, transport, and quality certificates of silica fume for unshaped refractory.
This Standard applies to that – when smelting ferrous alloys or industrial silicon, silica-
bearing fume are gathered by fume hoods; after oxidized and agglomerated, silica fume is
collected through dry dust collectors.
2 Normative references
The articles contained in the following documents have become part of this Standard when
they are quoted herein. For the dated documents so quoted, all the modifications
(excluding corrections) or revisions made thereafter shall not be applicable to this Standard.
For the undated documents so quoted, the latest editions shall be applicable to this
Standard.
GB/T 6901.1 Rules for the presentation of graphical symbols for use in technical
product documentation - Part 1. Basic rules
GB/T 6901.2 Rules for the presentation of graphical symbols - Graphical symbols for
use in the technical documentation of products - Part 2. Specification for graphical
symbols in a computer sensible form,including raphical symbols for a reference
library,and requirements
GB/T 6901.3 Rules for the presentation of graphical symbols - Graphical symbols for
use in the technical documentation of products - Part 3. Classification of connect notes
networks and their encoding
GB/T 6901.4 Chemical analysis of silica refractories - Part 4. Determination of iron
oxide - o-Phenanthroline photometric method
GB/T 6901.5 Chemical analysis of silica refractories - Part 5. Determination of
aluminium oxide - Chromazurol S photometric method
GB/T 6901.6 Chemical analysis of silica refractories - Part 6. Determination of
aluminium oxide - EDTA volumetric method
GB/T 6901.8 Chemical analysis of silica refractories - Part 8. Determination of
calciuim oxide and magnesium oxide - Atomic absorption spectrophotometric method
GB/T 6901.9 Chemical analysis of silica refractproes - Part 9. Determination of
potassium oxide and sodium oxide - Atomic absorption spectrophotometric method
GB/T 9724 Chemical reagent - General rule for the determination of pH
GB/T 13390 Metallic powder-Determination of the specific surface area - Method of
nitrogen adsorption
GB/T 15545 Unshaped refactory - Packing, marking, transportation and storage
GB/T 16555.1-1996 Chemical analysis for silicon carbide refractories - Determination
of silicon carbide - Absorb gravimetric method
YB/T 5164 Test method for sieve analgsis of refractory mortar
3 Designations
SF – the English acronym for silica fume. The number following after it is the percentage
content of silica.
Silica fume has 4 designations in total, that is, SF96, SF93, SF90, and SF88.
4. Technical Requirements
The physiochemical indexes of silica fume are shown in Table 1. Any special requirements
can be determined through negotiation by supplier and purchaser.
5 Test Methods
5.1 Silica shall be determined in accordance with GB/T 6901.2 or GB/T 6901.3.
5.2 Alumina shall be determined in accordance with GB/T 6901.5 or GB/T 6901.6.
5.3 Ferric oxide shall be determined in accordance with GB/T 6901.4.
5.4 Calcia and magnesia shall be determined in accordance with GB/T 6901.8.
5.5 Potassium oxide and sodium oxide shall be determined in accordance with GB/T
6901.9.
5.6 Carbon content shall be determined in accordance with Article 7.4.2 in GB/T 16555.1-
1996.
5.7 Loss on ignition shall be determined in accordance with GB/T 6901.1.
5.8 pH determination. weigh 5.00g of silica fume; put it into a 150mL beaker. Add 50mL of
distilled water into the beaker; continuously stir the mixture for 5min, until it becomes
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of YB/T 115-2004 be delivered?Answer: The full copy PDF of English version of YB/T 115-2004 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of YB/T 115-2004_English with my colleagues?Answer: Yes. The purchased PDF of YB/T 115-2004_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- YB/T 115-2004 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version YB/T 115-2004?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YB/T 115-2004 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of YB/T 115-2004?A step-by-step guide to download PDF of YB/T 115-2004_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "YB/T 115-2004".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |