HOME
Cart(0)
Quotation
About-Us
Tax
PDFs
Standard-List
Powered by Google
www.ChineseStandard.net
Database: 189760 (15 Feb 2025)
YBB 60112012 English PDF
YBB 60112012_English: PDF (YBB60112012)
Standard ID
Contents [version]
USD
STEP2
[PDF] delivered in
Standard Title (Description)
Status
PDF
YBB60112012
English
140
Add to Cart
0--9 seconds. Auto-delivery
Tests for Hydrolytic Resistance of Glass Grains at 98 Degree C
YBB 60112012 YBB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA Tests for Hydrolytic Resistance of Glass Grains at 98°C Tests for Hydrolytic Resistance of Glass Grains at 98°C This method is applicable to the determination and grading of hydrolytic resistance of various types of medicinal glass. This method is a material testing method. Soak 2 g of glass particles with a particle size of 300~500 μm in 98°C test water for 60 minutes. The extent to which glass particles are etched by water is measured and graded by titrating the etching solution. Reagent: test water The test water shall be boiled in an aged flask for more than 15 minutes to remove dissolved gases such as carbon dioxide. Test water can be stored in stoppered flasks. The pH shall not change within 24 hours. Instruments Water bath: constant temperature control is possible. Volumetric flask: 50 ml, with glass stopper. Volumetric flasks and glass stoppers must be made of borosilicate glass with an average linear thermal expansion coefficient of approximately 3.3×10-6K-1. The new volumetric flask must undergo aging treatment, that is, add an appropriate amount of water to the volumetric flask and process it repeatedly according to the heating conditions specified in the test steps until the water becomes neutral to methyl red. Erlenmeyer flask: 100 ml and 250 ml. The material requirements for flasks and the handling methods for new bottles are the same as for volumetric flasks. Hammer, mortar and pestle made of hardened steel (see figure). A set of stainless-steel standard sieves (including sieve A: pore diameter is 500 μm; sieve B: pore diameter is 300 μm; sieve O: pore diameter is 600~1000 μm).
......
Similar standards:
YBB60012012
YBB60022012
YBB60032012
Similar PDFs (Auto-delivered in 9 seconds):
YBB60112012
YBB60102012
YBB60122012