Chinese Standards Shop Partner of Google-Books Database: 169760 (Nov 16, 2019)
 HOME   Quotation   Tax   Examples Standard-List   Contact-Us   View-Cart
  

YBB 00242004-2015

Chinese Standard: 'YBB 00242004-2015'
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusRelated Standard
YBB 00242004-2015English190 Add to Cart 0--15 minutes. Auto immediate delivery. Combinational Closures of PP for Plastic Infusion Containers(with ring-pull) Valid YBB 00242004-2015
YBB 00242004-2015Chinese16 Add to Cart <=1-day [PDF from Chinese Authority, or Standard Committee, or Publishing House]

 YBB 00242004-2015 -- Click to view a PDF In 0~10 minutes time, full copy of this English-PDF will be auto-immediately delivered to your email by our cloud-server.  
Detail Information of YBB 00242004-2015; YBB00242004-2015
Description (Translated English): (Plastic containers transfusion mix covered with polypropylene (pull-ring))
Sector / Industry: Medical & Pharmaceutical Packaging Industry Standard
Classification of Chinese Standard: C08
Word Count Estimation: 4,432
Date of Issue: 2015-08-11
Date of Implementation: 2015-12-01
Older Standard (superseded by this standard): YBB 0024-2004
Regulation (derived from): China Food & Drug Administration Announcement 2015 No.164

YBB 00242004-2015
YBB
PHARMACEUTICAL PACKAGING MATERIAL
STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA
Combinational Closures of PP for Plastic Infusion Containers
(with Ring-pull)
塑料输液容器用聚丙烯组合盖(拉环式)
ISSUED ON. AUGUST 11, 2015
IMPLEMENTED ON. DECEMBER 01, 2015
Issued by. Food and Drug Administration of the People’s Republic of China
How to BUY & immediately GET a full-copy of this standard?
2. Search --> Add to Cart --> Checkout (3-steps);
3. No action is required - Full-copy of this standard will be automatically &
immediately delivered to your EMAIL address in 0~60 minutes.
Combinational Closures of PP for Plastic Infusion Containers
(with Ring-pull)
This standard applies to combinational closures of PP for plastic infusion containers (with
ring-pull), which consists of ring-pull outer closure (made of the principal material PP), inner
closure (made of the principal material PP) and liner.
The polyisoprene liner in combinational closures shall satisfy the requirements of the
Synthetic Polyisoprene Liners for Pharmaceutical Use (YBB00232004-2015).
Part 1 – Outer Closure
[Appearance] Take 125 outer closures; conduct visual inspection from the front view under
sufficient natural light. There shall be no scars, lacerations, bubbles, inclusions of foreign
matters, burrs or other defects. The quantity of samples not satisfying the requirements
above shall not be greater than 10.
[Opening force of ring-pull] Take 10 outer closures; place in a high-pressure sterilizer to
heat to 121°C ± 2°C; hold for 30 min; after cooling to room temperature, fix to the clamp of
tensionmeter; fix ring-pull to a mobile clamp. Along the direction forming an angle of 23° to
the perpendicular direction, apply tensile force to ring-pull at the speed of 200 mm/min ± 20
mm/min; record the force value at which ring-pull is broken. The opening force shall not
exceed 80 N; during the test process, other areas surrounding the puncture area shall not be
torn, and ring-pull shall not be broken (during the test process, take another sample to
conduct test once again if ring-pull is broken in the clamp).
[Leakproofness of ring-pull cutting place] Take 10 outer closures; place in a high-
pressure sterilizer to heat to 121°C ± 2°C; hold for 30 min; after cooling to room temperature,
use a penetrating agent (of 65% ethyl alcohol. 10 g/L methylene blue solution = 100.5) to fill
to 2/3 of the height; place on the filter paper to hold for 60 min. No leakage shall occur in the
cutting place of ring-pull.
[Soluble substance test] Preparation of test solution. take 40.0 g of outer closure; use water
to wash; after drying at room temperature, place in a 500-ml conical flask; add 200 ml of
water; seal; place in a high-pressure sterilizer; heat to 121°C ± 2°C; hold for 30 min; cool to
room temperature as test solution; take water to repeat the operation as blank solution, and
then conduct the following test.
Readily Oxidizable Substances Measure accurately 20 ml of test solution; add accurately
20 ml of potassium permanganate titration solution (0.002 mol/L) and 2 ml of dilute sulphuric
acid; boil for 3 min; cool abruptly; add 0.1 g of potassium iodide; place in the dark for 5 min;
use sodium thiosulfate titration solution (0.01 mol/L) to titrate until light brown; then add 5
drops of starch indicator solution to titrate until colourless. Take blank solution to repeat the
operation. The difference of the consumptions of sodium thiosulfate titration solution (0.01
mol/L) of the two shall not be greater than 3.0 ml.
Involatile Substances Measure accurately 50 ml of test solution and blank solution each;
place in an evaporating dish of constant weight; evaporate dry in a water bath; dry to constant
weight at 105°C. The difference between the two shall not be greater than 12.5 mg.
Figure 1 and Figure 2 to puncture the marked part of the liner of combinational closures; then
pull out at the speed of 200 mm/min ± 20 mm/min. The separating force for the plastic
puncture device shall not be less than 5.0 N; the separating force for the metal puncture
device shall not be less than 1.0 N.
Static Retention Force of Puncture Device Take 10 samples above mentioned to mount
respectively to the matched plastic infusion containers; seal the containers after injecting the
marked volume of infusion water. First use the plastic puncture device as specified in Figure
1 to puncture vertically the marked part of the liner to ensure the puncture device penetrates
the rubber liners and inner closures; hang the containers upside down; hang weights of 0.3
kg to the puncture device. The puncture device shall be retained for 4 h before being pulled
out and the punctured part shall have no leakage.
Leakproofness of Drug Injection Point Take 10 samples above mentioned to mount
respectively to the matched plastic infusion containers; seal the containers after injecting the
marked volume of infusion water; use an injection needle to puncture vertically for 3 times at
three different points of the drug injection point of combinational closures; after pulling out
the injection needle, place the plastic infusion containers between two parallel plates; apply
an internal pressure of 20 kPa; hold for 15 s. The drug inject point shall have no leakage.
[Bacterial Endotoxin] Take an appropriate amount of combinational closures; mix in
accordance with the proportion of adding to each sample 50 ml of bacterial endotoxin test
water; shake for 1 min; use the moist heat sterilization method to heat to 121°C ± 2°C; hold
for 30 min; cool to room temperature as test solution; conduct measurement by law (General
Rule 1143 of Part 4 of Chinese Pharmacopoeia 2015). The amount of endotoxin in each 1
ml of test solution shall not be greater than 0.25 EU.
[Storage] The inner packing shall be sealed with LDPE pouches for pharmaceutical
packaging and stored in a clean, ventilated place.
Annex – Inspection Rules
1. Product inspection is divided into full inspection and partial inspection.
2. In case of any of the following circumstances, a complete inspection shall be conducted
as required by standa......
Related standard:   YBB 00242002-2015  YBB 00242003-2015
   
 
Privacy   ···   Product Quality   ···   About Us   ···   Refund Policy   ···   Fair Trading   ···   Quick Response
Field Test Asia Limited | Taxed in Singapore: 201302277C | Copyright 2012-2019