| Standard ID | TSG Q7016-2008 (TSGQ7016-2008) |
| Description (Translated English) | Crane Installation, Modernization and General Overhaul Supervision Inspection Regulation |
| Sector / Industry | Special Equipment Industry Standard |
| Classification of Chinese Standard | J80 |
| Classification of International Standard | 53.020 |
| Word Count Estimation | 33,373 |
| Date of Issue | 2008-08-07 |
| Date of Implementation | 2009-04-01 |
| Older Standard (superseded by this standard) | ZBFGH 43-2002 |
| Drafting Organization | Jiangsu Province Special Equipment Safety Supervision Inspection Institute |
| Administrative Organization | ?AQSIQ |
| Regulation (derived from) | ?AQSIQ Announcement 2008 No.90 |
| Summary | This standard specifies the mechanical installation of lifting a major transformation of the purpose of supervision, inspection and maintenance, nature, basis, Scope, ways, work content, procedures and requirements. Provides for the supervision and inspection agencies, supervision and inspection personnel and Pijiandanwei duty requirements. And appropriate adjustments based on the reality of the supervision and inspection of the project, to guide and regulate the transformation of major maintenance lifting machinery installation supervision and inspection work, install these Rules, transformation, major maintenance (hereinafter referred to as construction) Supervision and Inspection, is the lifting machinery mandatory construction process, the construction unit on the basis of self-qualified by the State Administration of Quality supervision, Inspection and Quarantine (hereinafter referred to as AQSIQ) approved inspection agency (hereinafter referred to as the supervisory inspection agency) carried out the construction process, verification test. This rule applies (Special Equipment Safety Supervision Regulations) (hereinafter referred to as the Regulations) within the specified range of lifting machinery construction supervision and inspection (hereinafter referred to as supervisory inspection). |