Chinese Standards Shop Partner of Google-Books Database: 169760 (Nov 16, 2019)
 HOME   Quotation   Tax   Examples Standard-List   Contact-Us   View-Cart
  

TB/T 3396.4-2015

Chinese Standard: 'TB/T 3396.4-2015'
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusRelated Standard
TB/T 3396.4-2015English160 Add to Cart 0--15 minutes. Auto immediate delivery. Test methods for fastening systems of high-speed railway - Part 4: Test of fatigue performance of fastening assembly Valid TB/T 3396.4-2015
TB/T 3396.4-2015Chinese18 Add to Cart <=1-day [PDF from Chinese Authority, or Standard Committee, or Publishing House]

 TB/T 3396.4-2015 -- Click to view a PDF In 0~10 minutes time, full copy of this English-PDF will be auto-immediately delivered to your email by our cloud-server.  
Detail Information of TB/T 3396.4-2015; TB/T3396.4-2015
Description (Translated English): Test methods for fastening systems of high-speed railway - Part 4: Test of fatigue performance of fastening assembly
Sector / Industry: Railway & Train Industry Standard (Recommended)
Classification of Chinese Standard: S12
Classification of International Standard: 45.08
Word Count Estimation: 11,161
Date of Issue: 2015-07-15
Date of Implementation: 2016-02-01
Regulation (derived from): State Railway-Science-Regulation (2015) No.29

TB/T 3396.4-2015
TB
RAILWAY INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 45.080
S 12
Test Methods for Fastening Systems of High –
Speed Railway - Part 4. Test of Fatigue Performance of
Fastening Assembly
高速铁路扣件系统试验方法
第 4部分. 组装疲劳性能试验
ISSUED ON. JULY 15, 2015
IMPLEMENTED ON. FEBRUARY 1, 2016
Issued by. National Railway Administration of the People’s Republic of
China
Table of Contents
Foreword ... 3 
1 Scope ... 4 
2 Normative References ... 4 
3 Symbols ... 4 
4 Principle ... 5 
5 Test Parameters ... 5 
6 Test Equipment ... 6 
7 Test Pieces ... 7 
8 Test Method for a Single Rail... 7 
9 Alternative Test Method ... 11 
10 Final Inspection ... 13 
11 Test report ... 14 
Foreword
TB/T 3396 " Test Methods for Fastening Systems of High-speed Railway" is divided
into seven parts.
-- Part 1. Determination of Lateral Resistance of Steel Rails;
-- Part 2. Determination of Assembly Fastening Pressure;
-- Part 3. Determination of Static Stiffness of Assembly;
-- Part 4. Test of Fatigue Performance of Fastening Assembly;
-- Part 5. Determination of Insulation Resistance;
-- Part 6. Effects of Adverse Environmental Conditions;
-- Part 7. Pulling Resistance Test of Embedded Parts.
This Part is Part 4 of TB/T 3396.
This Part was drafted according to the rules given in GB/T 1.1-2009.
This Part shall be under the jurisdiction of China Academy of Railway Sciences
Standards & Metrology Research Institute.
Drafting organization of this Part. China Academy of Railway Sciences Railway
Engineering Research Institute.
The main drafters of this Part. Zhao Rukang, Xiao Junheng, Fang Hangwei, Xu
Shaohui and Li Zirui.
Test Methods for Fastening Systems of High –
Speed Railway - Part 4. Test of Fatigue Performance of
Fastening Assembly
1 Scope
This Part specifies the indoor test methods for fatigue performance of fastening
assembly.
This Part applies to the fastening systems of high-speed railway.
2 Normative References
The following documents are essential to the application of this standard. For the dated
references, only the dated editions are applicable to this standard. For the undated
references, their latest editions (including all amendments) are applicable to this
standard.
TB/T 3396.1 Test Methods for Fastening Systems of High-speed Railway - Part
1. Determination of Lateral Resistance of Steel Rails
TB/T 3396.2 Test Methods for Fastening Systems of High-speed Railway - Part
2. Determination of Assembly Fastening Pressure
TB/T 3396.3 Test methods for fastener systems of high-speed railway - Part 3.
Determination of Static Stiffness of Assembly
3 Symbols
The following symbols apply to this document.
α. The included angle between load action line and vertical line of rail bottom, in
degree (°);
PL. The maximum load component of a single bearing surface parallel to the
bottom surface of rail, in kN;
PV. The maximum load component of a single bearing surface perpendicular to
the bottom surface of rail, in kN;
T1. The relative distance of rail head to the fixed point of sleeper before fatigue
test, in mm;
100 mm ± 10 mm; the radius of its contacting part with rail head is more than the arc
radius of rail head contacting surface, in order to maintain its linear contact with steel
rail under all loading conditions.
6.6 Displacement sensor
The instrument measuring the vertical displacement and horizontal displacement of
steel rail relative to sleeper, its indication error is 1.01 mm.
6.7 Load sensor
The instrument measuring the load applied on steel rail or loading frame, its accuracy
is class I.
7 Test Pieces
7.1 Sleeper
The sleeper, ½-sleeper or slab rail element that has fastener embedded parts or
reserved holes (all named sleeper in the test method). The bearing surface of sleeper
shall not be trimmed for the test. When the fastener embedded parts or reserved holes
are not symmetrical relative to the lateral centerline of sleeper, use two or two ½-
sleepers for the test.
7.2 Fastener
A complete set of fastener that includes all components.
8 Test Method for a Single Rail
8.1 General
The test method for single rails is applicable to the test in which a single rail is fixed to
one end of sleeper or a half sleeper with fasteners. No adjustment, re-screwing or
trimming of fastening assembly shall be made during the test.
8.2 Test procedure
8.2.1 Fasteners arranged on the lateral centerline of sleeper
If the fasteners are arranged symmetrically on the lateral centerline of sleeper,
assembly according to relevant product requirements, then use fasteners to fix a short
rail about 0.5 m long to the bearing surface of sleeper, and then conduct the test
according to the sequence in 8.3, 8.4, 8.5, 8.6 and 8.7.
8.2.2 Fasteners staggered in arrangement
aside for 24 h. assembly static rigidity (see 8.5), rail vertical resistance (see 8.4), and
assembly fastening pressure (see 8.3).
9 Alternative Test Method
9.1 General
The alternative test method is applicable to the test in which the fastening system is
used to fix two rails on one or two sleepers. No adjustment, re-screwing or trimming
shall be made for the fastening assembly during the test.
9.2 Test procedure
9.2.1 Fasteners arranged on the vertical centerline of sleeper
If the fasteners are arranged symmetrically on the vertical centerline of sleeper,
assembly according to relevant product requirements, then use fasteners to fix two
short rails about 0.5 m long to the bearing surface of sleeper; conduct the test
according to the sequence in 9.3, 9.4, 9.5, 9.6 and 9.7.
9.2.2 Fasteners staggered in arrangement
If the fasteners are staggered in arrangement, assembly according to relevant product
requirements, then use fasteners to fix one end of two short rails about 1 m long to the
bearing surfaces of sleeper A; conduct the test for the fasteners on the two bearing
surfaces according to the sequence in 9.3, 9.4 and 9.5; use fasteners to fix the other
end of the two rails to two bearing surfaces of sleeper B, as shown in Figure 7. Conduct
the test of 9.6 after fixing; disassemble the fasteners on sleeper B after the test; and
conduct the test of 9.7 for the fasteners on sleeper A. During the process of fixing and
disassembling the fasteners on sleeper B, no disturbance shall be produced on the
fasteners on sleeper A.
Figure 7 Arrangement of Test Sleepers When the Fasteners Are Staggered in
Arrangement
9.3 Assembly fastening pressure
Determine the assembly fastening pressure of fasteners according to the method
in Figure 5; the distance between two bearing surfaces shall be as small as possible;
the load shall be distributed equally on two bearing surfaces.
Apply load slowly on the test assembly system to the maximum load; load to 2 times
of the maximum load if the fasteners are staggered; the loading rate is not more than
200 kN/min for a single sleeper; the loading rate is not more than 400 kN/min for two
sleepers. Repeat loading for 10 times; during the last 3 times of loading, the error of
the included angle α between maximum loading action line and rail bottom vertical line
shall be within ±0.5°.
Apply cyclic load on the test assembly system, from the minimum 9 kN (for a single
sleeper) or 18 kN (for two sleepers) to the maximum load 2PV (the maximum load 4PV
for two sleepers), loading frequency is 3 Hz ~ 5 Hz. Within the last 100 cycles of the
first 1 000 cycles, record the dynamic displacement of 10 cycles of rail relative to
sleeper (as shown in Figure 6, the rail vertical displacement shall be perpendicular to
rail bottom surface and distributed uniformly around fasteners; the lateral displacement
of rail head shall be in-parallel to rail bottom surface and distributed equally on both
sides of fasteners); take the average value as the dynamic displacement amou......
Related standard:   TB/T 3396.1-2015  TB/T 3396.2-2015
   
 
Privacy   ···   Product Quality   ···   About Us   ···   Refund Policy   ···   Fair Trading   ···   Quick Response
Field Test Asia Limited | Taxed in Singapore: 201302277C | Copyright 2012-2019