TB/T 3138-2018 PDF English
US$135.00 · In stock · Download in 9 secondsTB/T 3138-2018: Technical specification of flame retardant materials for railway locomotive and vehicle Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid TB/T 3138: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| TB/T 3138-2018 | English | 135 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Technical specification of flame retardant materials for railway locomotive and vehicle
| Valid |
| TB/T 3138-2006 | English | 85 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Technical specification of flame retardant materials for railway locomotive and vehicle
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: TB/T 3138-2018
Similar standards GB/T 5599 TB/T 1451 TB/T 3138-2018: Technical specification of flame retardant materials for railway locomotive and vehicle
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/TBT3138-2018
TB
RAILWAY INDUSTRY STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 45.060.01
S 30
Replacing TB/T 3138-2006
Technical specification of flame retardant materials for
railway locomotive and vehicle
Issued on. JULY 16, 2018
Implemented on. FEBRUARY 01, 2019
Issued by. National Railway Administration
Table of Contents
Foreword... 3
1 Scope... 4
2 Normative references... 4
3 Technical requirements and test methods... 5
3.1 General requirements... 5
3.2 Structural materials for interior... 5
3.3 Insulation and packaging materials... 6
3.4 Interior decoration materials... 7
3.5 Air conditioning duct... 8
3.6 General rubber materials... 8
3.7 Wire and cable... 8
Appendix A (Normative) 45° angle burning test method and judgment... 9
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces TB/T 3138-2006 "Technical specification of flame
retardant materials for railway locomotive and vehicle". Compared with TB/T
3138-2006, the main technical changes of this standard are as follows.
- MODIFY the division principle of structural material products used inside
vehicles (see 3.2; 3.1 of the 2006 edition);
- ADD the sampling requirements for finished products of flame-retardant
materials for railway locomotive and vehicle (see 3.1);
- ADD the flame retardant requirements of polymer materials (see 3.3.2);
- ADD the flame retardant requirements of general rubber materials (see 3.6)
- DELETE the physical and mechanical performance requirements of
materials (see Table 1 ~ Table 16 of the 2006 edition);
- MODIFY the number of samples and judgment conditions in Appendix A
(see Appendix A; Appendix A of the 2006 edition).
This standard was proposed by and shall be under the jurisdiction of the
Institute of Standards and Metrology of China Academy of Railway Sciences
Group Co., Ltd.
Drafting organizations of this standard. Institute of Metals and Chemistry of
China Academy of Railway Sciences Group Co., Ltd., CRRC Qingdao Sifang
Rolling Stock Research Institute Co., Ltd., Standard Metrology Institute of China
Railway Science Research Institute Group Co., Ltd., CRRC Tangshan Rolling
Stock Co., Ltd. CRRC Nanjing Puzhen Vehicle Co., Ltd.
The main drafters of this standard. Wu Shaoli, Wang Wei, Chen Meng, Yu
Quanlei, Wu Huiyong, Zhang Jianmin, Lu Lifen, Chen Xiaowei.
This standard replaces the standard previously issued as follows.
- TB/T 2402-1993;
- TB/T 2560-1995;
- TB/T 3138-2006.
Technical specification of flame retardant materials for
railway locomotive and vehicle
1 Scope
This standard specifies the technical requirements and test methods for the
flame retardant materials for railway locomotive and vehicle.
This standard applies to railway locomotives and passenger vehicles which has
a maximum operating speed of not more than 200 km/h.
2 Normative references
The following documents are essential to the application of this document. For
the dated documents, only the versions with the dates indicated are applicable
to this document; for the undated documents, only the latest version (including
all the amendments) is applicable to this standard.
GB/T 2406.2 Plastics - Determination of burning behavior by oxygen index -
Part 2.Ambient-temperature test
GB/T 5454 Textiles - Burning behavior - Oxygen index method
GB/T 5464 Non-combustibility test method for building materials
GB/T 8323.2 Plastic - Smoke generation - Part 2.Determination of optical
density by a single-chamber test
GB 8624 Classification for burning behavior of building materials and
products
3 Technical requirements and test methods
3.1 General requirements
When testing fire-retardant materials for railway locomotive and vehicle, it shall
sample from the finished products. If samples cannot be taken from finished
products, it should prepare specimen according to actual applications.
3.2 Structural materials for interior
3.2.1 Products with horizontal surface facing down
Mainly refers to products such as roof panels, side roof panels, luggage racks,
etc. The products shall meet the requirements of Table 1.
3.2.3 Product with horizontal surface facing up
Mainly refers to products such as flooring and coverings. The products shall
meet the requirements of Table 3.
3.3 Insulation and packaging materials
3.3.1 Inorganic materials for thermal insulation (glass wool board, mineral wool,
rock wool, etc.) shall meet the requirements in Table 5.
3.3.2 The high polymer materials used for thermal insulation shall meet the
requirements of Table 6.
3.7 Wire and cable
The flame-retardant requirements and test methods of wires and cables shall
comply with the provisions of TB/T 1484 (all parts) or be negotiated between
the supplier and the buyer.
Appendix A
(Normative)
45° angle burning test method and judgment
A.1 45° angle burning test method
A.1.1 The 45° angle burning test device is as shown in Figure A.1.The
specimen size is 257 mm long, 182 mm wide. The number of specimens is 2.
If the product is anisotropic, take two from each in the warp and weft directions.
Keep the specimens be inclined at 45°. The vertical distance from the bottom
center of the fuel container to the center of the specimen is 25.4 mm. Use a
material with low thermal conductivity similar to cork as the base of the container.
Add 0.5 mL of absolute ethanol to the combustion container to ignite it, until the
fuel burned out.
TB/T 3138-2018
TB
RAILWAY INDUSTRY STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 45.060.01
S 30
Replacing TB/T 3138-2006
Technical specification of flame retardant materials for
railway locomotive and vehicle
Issued on. JULY 16, 2018
Implemented on. FEBRUARY 01, 2019
Issued by. National Railway Administration
Table of Contents
Foreword... 3
1 Scope... 4
2 Normative references... 4
3 Technical requirements and test methods... 5
3.1 General requirements... 5
3.2 Structural materials for interior... 5
3.3 Insulation and packaging materials... 6
3.4 Interior decoration materials... 7
3.5 Air conditioning duct... 8
3.6 General rubber materials... 8
3.7 Wire and cable... 8
Appendix A (Normative) 45° angle burning test method and judgment... 9
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces TB/T 3138-2006 "Technical specification of flame
retardant materials for railway locomotive and vehicle". Compared with TB/T
3138-2006, the main technical changes of this standard are as follows.
- MODIFY the division principle of structural material products used inside
vehicles (see 3.2; 3.1 of the 2006 edition);
- ADD the sampling requirements for finished products of flame-retardant
materials for railway locomotive and vehicle (see 3.1);
- ADD the flame retardant requirements of polymer materials (see 3.3.2);
- ADD the flame retardant requirements of general rubber materials (see 3.6)
- DELETE the physical and mechanical performance requirements of
materials (see Table 1 ~ Table 16 of the 2006 edition);
- MODIFY the number of samples and judgment conditions in Appendix A
(see Appendix A; Appendix A of the 2006 edition).
This standard was proposed by and shall be under the jurisdiction of the
Institute of Standards and Metrology of China Academy of Railway Sciences
Group Co., Ltd.
Drafting organizations of this standard. Institute of Metals and Chemistry of
China Academy of Railway Sciences Group Co., Ltd., CRRC Qingdao Sifang
Rolling Stock Research Institute Co., Ltd., Standard Metrology Institute of China
Railway Science Research Institute Group Co., Ltd., CRRC Tangshan Rolling
Stock Co., Ltd. CRRC Nanjing Puzhen Vehicle Co., Ltd.
The main drafters of this standard. Wu Shaoli, Wang Wei, Chen Meng, Yu
Quanlei, Wu Huiyong, Zhang Jianmin, Lu Lifen, Chen Xiaowei.
This standard replaces the standard previously issued as follows.
- TB/T 2402-1993;
- TB/T 2560-1995;
- TB/T 3138-2006.
Technical specification of flame retardant materials for
railway locomotive and vehicle
1 Scope
This standard specifies the technical requirements and test methods for the
flame retardant materials for railway locomotive and vehicle.
This standard applies to railway locomotives and passenger vehicles which has
a maximum operating speed of not more than 200 km/h.
2 Normative references
The following documents are essential to the application of this document. For
the dated documents, only the versions with the dates indicated are applicable
to this document; for the undated documents, only the latest version (including
all the amendments) is applicable to this standard.
GB/T 2406.2 Plastics - Determination of burning behavior by oxygen index -
Part 2.Ambient-temperature test
GB/T 5454 Textiles - Burning behavior - Oxygen index method
GB/T 5464 Non-combustibility test method for building materials
GB/T 8323.2 Plastic - Smoke generation - Part 2.Determination of optical
density by a single-chamber test
GB 8624 Classification for burning behavior of building materials and
products
3 Technical requirements and test methods
3.1 General requirements
When testing fire-retardant materials for railway locomotive and vehicle, it shall
sample from the finished products. If samples cannot be taken from finished
products, it should prepare specimen according to actual applications.
3.2 Structural materials for interior
3.2.1 Products with horizontal surface facing down
Mainly refers to products such as roof panels, side roof panels, luggage racks,
etc. The products shall meet the requirements of Table 1.
3.2.3 Product with horizontal surface facing up
Mainly refers to products such as flooring and coverings. The products shall
meet the requirements of Table 3.
3.3 Insulation and packaging materials
3.3.1 Inorganic materials for thermal insulation (glass wool board, mineral wool,
rock wool, etc.) shall meet the requirements in Table 5.
3.3.2 The high polymer materials used for thermal insulation shall meet the
requirements of Table 6.
3.7 Wire and cable
The flame-retardant requirements and test methods of wires and cables shall
comply with the provisions of TB/T 1484 (all parts) or be negotiated between
the supplier and the buyer.
Appendix A
(Normative)
45° angle burning test method and judgment
A.1 45° angle burning test method
A.1.1 The 45° angle burning test device is as shown in Figure A.1.The
specimen size is 257 mm long, 182 mm wide. The number of specimens is 2.
If the product is anisotropic, take two from each in the warp and weft directions.
Keep the specimens be inclined at 45°. The vertical distance from the bottom
center of the fuel container to the center of the specimen is 25.4 mm. Use a
material with low thermal conductivity similar to cork as the base of the container.
Add 0.5 mL of absolute ethanol to the combustion container to ignite it, until the
fuel burned out.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of TB/T 3138-2018 be delivered?Answer: The full copy PDF of English version of TB/T 3138-2018 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of TB/T 3138-2018_English with my colleagues?Answer: Yes. The purchased PDF of TB/T 3138-2018_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- TB/T 3138-2018 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version TB/T 3138-2018?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version TB/T 3138-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of TB/T 3138-2018?A step-by-step guide to download PDF of TB/T 3138-2018_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "TB/T 3138-2018".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |