SN/T 4148-2015 PDF English
US$145.00 · In stock · Download in 9 secondsSN/T 4148-2015: Determination of volatile organic compounds (VOCs) in packing materials - Static headspace gas chromatography Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| SN/T 4148-2015 | English | 145 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Determination of volatile organic compounds (VOCs) in packing materials - Static headspace gas chromatography
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: SN/T 4148-2015
SN/T 4148-2015: Determination of volatile organic compounds (VOCs) in packing materials - Static headspace gas chromatography
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/SNT4148-2015
SN
ENTRY-EXIT INSPECTION AND QUARANTINE
INDUSTRY STANDARD OF PRC
Determination of volatile organic compounds (VOCs)
in packing materials – Static headspace gas
chromatography
Issued on: FEBRUARY 09, 2015
Implemented on: SEPTEMBER 01, 2015
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of PRC
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Terms and definitions ... 4
4 Principle ... 5
5 Reagents and materials ... 5
6 Devices ... 7
7 Sample preparation and storage ... 9
8 Analysis steps ... 10
9 Precision ... 13
APPENDIX A (Informative) Typical headspace-gas chromatographic conditions
... 15
APPENDIX B (Normative) Standard addition method ... 17
Appendix C (Informative) Examples of volatile organic compounds
chromatogram in styrene polymer package ... 19
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed by AND shall be under the jurisdiction of the
National Certification and Accreditation Administration.
The drafting organizations of this standard. Shanghai Entry-exit Inspection and
Quarantine Bureau of the People's Republic of China.
The main drafters of this standard. Cheng Yuxiao, Li Hongtao, Ma Ming, Qiang
Yin, Zhou Yuyan.
Determination of volatile organic compounds (VOCs)
in packing materials – Static headspace gas
chromatography
1 Scope
This standard specifies the method for the measurement of volatile organic
compounds (VOCs) in packing materials through the static headspace gas
chromatography.
This standard is applicable to the measurement of volatile organic compounds
of the known chemical compositions in in packing materials; however, the
volatile organic compounds as generated due to the thermal degradation of
packing materials are not covered by the measurement scope of this standard.
2 Normative references
The following documents are essential to the application of this document. For
the dated documents, only the versions with the dates indicated are applicable
to this document; for the undated documents, only the latest version (including
all the amendments) are applicable to this standard.
GB/T 6682 Water for analytical laboratory use – Specification and tests
methods
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Packaging materials
It is the general term of the materials that are used to manufacture the
packaging containers AND constitute the packaging of the packed product.
3.2
Polymer packaging
immediately with water, OR otherwise seek treatment immediately if
serious. The volatile substances such as vinyl chloride and acrylonitrile
shall not be released into the laboratory air. It shall prepare and treat the
standard sample in a well-ventilated fume hood.
The reagents and water used in this standard are, unless otherwise noted or
required, analytical pure reagents and class III water as specified in GB/T 6682.
5.1 Methanol
5.2 Solvents. it is used to dissolve the polymer, AND it shall not contain any
interference which has the same retention time as that of the volatile component
to be measured. Typical polymer solvents include.
a) Dimethylformamide (DMF);
b) Dimethylacetamide (DMAC);
c) Propylene carbonate;
d) O-dichlorobenzene.
Note. The volatile contaminants in the solvent can be removed through an inert
gas purging for 24 h ~ 48 h.
5.3 Diluent. it is used to dilute and prepare the standard working solution of
volatile organic compounds, its retention time in the gas chromatography shall
be inconsistent with that of the substance to be measured, AND the commonly
used diluent includes.
a) Water;
b) n-Hexadecane.
5.4 Volatile organic standard sample. the highest concentrations available for
commercial analysis of volatile organic compounds by this method. Examples
of volatile organic compounds that may be present in the styrene polymer
package are as follows.
a) Styrene;
b) Acrylonitrile.
c) Butadiene;
d) Benzene;
Note. Suitable detectors include the following detectors.
a) Flame ionization detector (FID), which is used for the detection of
conventional organic volatiles;
b) Mass spectrometer (MSD), which is used for the detection of conventional
organic volatiles;
c) Electron capture detector (ECD), which is used for the detection of halides;
d) Nitrogen and phosphorus detector (NPD), which is used for the detection
of acrylonitrile.
6.2 Gas chromatographic column. Select a capillary gas chromatographic
column which can separate the components to be measured. As for the volatile
organic analysis of the styrene polymer package (1, 3-butadiene, acrylonitrile,
styrene, benzene, toluene, ethylbenzene, cumene), it is preferable to select HP-
INNOWA x 60 m x 0.32 mm (inner diameter) x 0.25 μm OR its equivalent.
6.3 Automatic headspace sampler. it is composed of the thermostatic sample
tray and the related accessories as required to reach to the requirements for
headspace vapour automatic sample injection.
6.4 Headspace bottle. 20 mL ~ 25 mL, with a rubber stopper gasket.
6.5 Syringe. it is calibrated; and the gas-tight syringes for headspace gas
chromatographic sample injection can be heated during sampling and injection
process.
6.6 Low-temperature freezing mill. with sieves of different apertures.
6.7 Constant temperature oven. it can maintain the temperature of 80 °C ~
150 °C (± 2 °C).
6.8 Analytical balance. its sensitivity is 0.0001 g.
Note 1. AVOID contacting with heated portion of the chromatograph, such
as detectors, columns, sample trays, hot vials, etc.
Note 2. Once heated, pressure is created in the sample vial containing the
polymer volatile components. After analysis, it shall use the syringe to empty
the pressure in the vial.
8.1.3 Headspace analysis conditions
The headspace heating temperature and time conditions are selected in
accordance with 8.1.2. Other headspace conditions are dependent on the
instrument used. OPTIMIZE the relevant parameters to obtain stable analysis
results and large detection signal values. The typical headspace analysis
conditions are shown in Appendix A.
8.2 Calibration
8.2.1 Calibration with solvent dissolution
Accurately PIPETTE the standard working solution A of certain volume [5.6.b)]
into the headspace bottle; the pipetted solution volume shall be consistent with
the volume of the solvent which is used to dissolve the sample in 7.4; quickly
SEAL the headspace bottle; PREPARE for the headspace-gas
chromatographic analysis. The calibration curve shall contain at least 5 different
concentrations.
8.2.2 Calibration without solvent dissolution
USE the calibrated syringe (6.5) to pipette a certain volume (2.0 µL ~ 10.0 µL)
of standard working solution B [5.6.c)] to the bottom of the headspace bottle;
quickly SEAL the headspace bottle; PREPARE for the headspace-gas
chromatographic analysis. The calibration curve shall contain at least 5 different
concentrations.
8.2.3 If the substrate of the sample to be measured has a great influence on
the measurement results of some volatile organic compounds, USE the
aforementioned two methods for measurement; if the recovery rate of the
sample to be measured cannot reach to the analysis requirements, it is allowed
to use the standard addition method in the Appendix B for detection.
Note. The calibration method described above requires periodic and repeated
calibration of the standard sample, AND the repeated calibration period is
determined based on the stability status of the chromatograph.
8.3 Headspace sample injection
8.3.1 Automatic sample analysis
PLACE the calibrated sample as mentioned in 8.2 AND the tested samples as
prepared in 7.4 and 7.5 into the constant temperature sample tray of the
automatic headspace sample injector (6.3); SET the headspace analysis
conditions in accordance with 8.1.3; then RUN it.
APPENDIX A
(Informative)
Typical headspace-gas chromatographic conditions
A.1 Examples of typical gas chromatographic conditions
USE the measurement chromatographic conditions of the volatile organic
compounds in styrene polymer packages as an example, since the
measurement results are depending onto the instruments used, so it is not
possible to provide the universal parameters for gas chromatography. The set
parameters shall ensure that, during the chromatographic measurement, the
measured components and other components can be effectively separated; the
following parameters are proved to be feasible.
a) Chromatography column. HP-INNOWAX capillary column 60 m x 0.32 mm
(inner diameter) x 0.25 μm, or the...
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of SN/T 4148-2015 be delivered?Answer: The full copy PDF of English version of SN/T 4148-2015 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of SN/T 4148-2015_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 4148-2015_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- SN/T 4148-2015 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of SN/T 4148-2015?A step-by-step guide to download PDF of SN/T 4148-2015_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "SN/T 4148-2015".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|