Chinese Standards Shop Partner of Google-Books Database: 169760 (Nov 16, 2019)
 HOME   Quotation   Tax   Examples Standard-List   Contact-Us   View-Cart
  

SJ/T 11364-2014

Chinese Standard: 'SJ/T 11364-2014'
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusRelated Standard
SJ/T 11364-2014English90 Add to Cart 0--15 minutes. Auto immediate delivery. Marking for the restriction of the use of hazardous substances in electrical and electronic product [including Amendment List 2017XG1] Valid SJ/T 11364-2014
SJ/T 11364-2014Chinese14 Add to Cart <=1-day [PDF from Chinese Authority, or Standard Committee, or Publishing House]

 SJ/T 11364-2014 -- Click to view a PDF In 0~10 minutes time, full copy of this English-PDF will be auto-immediately delivered to your email by our cloud-server.  
Detail Information of SJ/T 11364-2014; SJ/T11364-2014
Description (Translated English): Electronics
Sector / Industry: Electronics Industry Standard (Recommended)
Classification of Chinese Standard: L10
Classification of International Standard: 31.020
Word Count Estimation: 12,176
Date of Issue: 7/9/2014
Older Standard (superseded by this standard): SJ/T 11364-2006
Quoted Standard: GB/T 26572
Drafting Organization: China Electronics Standardization Institute
Administrative Organization: China Electronics Standardization Institute
Regulation (derived from): Ministry of Industry and Information Technology Notice No. 47 of 2014
Summary: This standard specifies the hazardous substances in electrical and electronic products, environmentally friendly use period, the possibility of recycling the labeling requirements. This standard applies to the territory of the People's Republic of China s

SJ/T 11364‐2014 
SJ
ICS 31.020
L 10
ELECTRONIC INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
Replacing SJ/T 11364-2006
Marking for the restriction of the use of hazardous
substances in electrical and electronic product
电子电气产品有害物质限制使用标识要求
ISSUED ON. JULY 09, 2014
IMPLEMENTED ON. JANUARY 01, 2015
Issued by. Ministry of Industry and Information Technology of the People’s Republic
of China
Table of Contents
Preface ... 3 
Introduction ... 4 
1 Scope ... 5 
2 Normative references... 5 
3 Terms and definitions ... 5 
4 General rules ... 6 
5 Logos for the restriction of the use of hazardous substances in electrical and electronic
product ... 7 
6 Marking requirements ... 9 
Appendix A ... 13 
References ... 16 
Preface 
This standard is drafted in accordance with the rules specified in GB/T 1.1-2009.
From the date of implementation, this standard shall replace and nullify SJ/T 11364-2006 “Marking
for control of pollution caused by electronic information products”.
Compared with SJ/T 11364-2006, the main changes of this standard are as follows.
a) Adjust the standard name and applicable scope – from “electronic information products” of
SJ/T 11364-2006 is adjusted to “electrical and electronic products”; and “pollution control” is
adjusted to “restriction of the use of hazardous substances”;
b) Add the explanation for reference application in logistics process (see Chapter 1);
c) Delete the GB 18455 “Package Recycling Marking” in the normative references (See Chapter
2 of SJ/T 11364-2006);
d) Add the terms and definitions of “electrical and electronic products”, “hazardous substance”,
and “logistics” (see 3.1, 3.2 and 3.7). Delete the terms and definitions relating to “electronic
information products”, “toxic and hazardous substances”, “manufacturer”, “importer”, and
“packaging materials” in SJ/T 11364-2006 (see 3.1, 3.2, 3.4, 3.5, and 3.7 in SJ/T 11364-
2006);
e) Add the requirements that the electrical and electronic products with display function may use
digital format for marking;
f) Delete the name labeling requirements to packaging materials (see Chapter 9 of SJ/T 11364-
2006).
Please note that some contents of this document may involve patents. The issuing organization of
this document shall not be responsible for identifying these patents.
This standard was proposed by the Electronic Information Product Pollution Control Standards
Working Group of the Ministry of Industry and Information Technology.
This standard shall be under the jurisdiction of the China Electronic Standardization Institute (CESI).
This standard was responsibly drafted by China Electronic Standardization Institute, and Motorola
(China) Electronics Co., Ltd.
Participating drafting organizations of this standard. See Appendix A.
The main drafters of this standard. Yang Meng, Han Shuoxiang, and Zhang Xinjian.
This standard was first-time issued in 2006.
Introduction 
Because of needs of technology and product functions, some existing electrical and electronic
product materials contain the hazardous substances such as lead, mercury, cadmium, hexavalent
chromium, polybrominated biphenyls, and polybrominated diphenyl ethers. In order to prevent the
products that contain the above-mentioned substances from causing the adverse effects on human
health and the environment after the use and discarded; to further standardize the markings for
electrical and electronic products; according to “Electronic Information Products Pollution Control
Management Methods” (Order No. 39 of the former Ministry of Industry and Information Technology);
and with reference to the related international standards and industrial practices, the former Ministry
of Industry and Information Technology issued SJ/T 111364-2006 “Marking for Control of Pollution
Caused by Electronic Information Products, based on Measures for the Control of Pollution from
Electronic Information Products” (Order No. 39 of the former Ministry of Industry and Information
Industry).
With the needs for revision of the “Electronic Information Products Pollution Control Management
Methods”, and the needs of enterprises for image display markings and logistics process markings
during the standard’s use for their products, SJ/T 111364-2006 had gradually shown that it is difficult
to fully adapt to the situation. The objectives drafting this standard are to solve the above-mentioned
issues. Start from the aspects of improving the environment, ease of application, implementing the
state’s policies and regulations, and reducing enterprise management cost. And further clarify and
improve the marking requirements for electrical and electronic products.
Marking for the restriction of the use of hazardous
substances in electrical and electronic product
1 Scope 
This standard specifies the marking requirements for hazardous substances in electrical and
electronic products, the environmental-protection use period, and recyclability.
This standard applies to the electrical and electronic products that are sold in the People’s Republic
of China. It may also be referenced and used by the logistics process of electrical and electronic
products.
2 Normative references 
The following documents are essential to the application of this document. For the dated documents,
only the versions with the date indicated are applicable to this document. For the undated
documents, only the latest versions (including all the amendments) are applicable to this document.
GB/T 26572 Requirements of concentration limits for certain restricted substances in electrical
and electronic products
3 Terms and definitions 
The following terms and definitions are applicable to this standard.
3.1 Electrical and electronic product
EEP
It refers to the devices and accessory products – the rated working voltage does not exceed 1500V
direct-current or 1000V alternate-current; they depend on current or electromagnetic field to work, or
their objectives are to generate, transmit and measure the current and electromagnetic field.
3.2 Hazardous substances
It refers to the lead and its compounds, mercury and its compounds, cadmium and its compounds,
hexavalent chromium compounds, polybrominated biphenyls, and polybrominated diphenyl ethers
that are contained in electrical and electronic products.
Note. In which, the “contained” refers to that the contents of hazardous substances exceed the limit
requirements specified in GB/T 26572.
3.3 Environment-friendly use period
It refers to the period - during which the hazardous substances contained in electrical and electronic
products will not leak or mutate suddenly under normal operating conditions. And it will not result in
serious environmental pollution or cause serious bodily injury to the user or damage to their assets
during the normal use by the user of the electrical and electronic products.
3.4 Recovery
It refers to the process of treatment to the discarded products, so that they can fulfill the requirements
of their original use purpose or be used for other purposes, including energy recovery and utilization.
[GB/T 20861-2007, definition 2.11]
3.5 Logistics
It refers to the process of flow of the physical goods from the supplying location to receiving location.
According to actual needs, the basic functions such as transportation, storage, loading and unloading,
transfer, packaging, distribution processing, distribution, and information processing shall be
implemented and combined organically.
[GB/T 18354-2006, definition 2.2]
4 General rules 
All electrical and electronic products that are sold in the People’s Republic of China shall be marked
with the logos required for the restriction of the use of hazardous substances in electrical and
electronic products, according to......
Related standard:   SJ/T 11610-2016  SJ/T 11468-2014
   
 
Privacy   ···   Product Quality   ···   About Us   ···   Refund Policy   ···   Fair Trading   ···   Quick Response
Field Test Asia Limited | Taxed in Singapore: 201302277C | Copyright 2012-2019