QC/T 896-2011 PDF English
US$70.00 · In stock · Download in 9 secondsQC/T 896-2011: Interface of electrical machine system for electric vehicles Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| QC/T 896-2011 | English | 70 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Interface of electrical machine system for electric vehicles
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: QC/T 896-2011
QC/T 896-2011: Interface of electrical machine system for electric vehicles---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/QCT896-2011
ICS 43.040
T 21
QC
AUTOMOTIVE INDUSTRY STANDARD
OF THE PEOPLE'S REPUBLIC OF CHINA
Interface of electrical machine system
for electric vehicles
Issued on. DECEMBER 20, 2011
Implemented on. JULY 01, 2012
Issued by. Ministry of Industry and Information Technology of the
People's Republic of China.
Notice of Ministry of Industry and Information
Technology of the People's Republic of China
2011 No.43
Table of Contents
Foreword... 6
1 Scope... 7
2 Normative references... 7
3 Terms and definitions... 7
4 Connection methods... 8
Appendix A (Informative) Installation dimensions AND installation methods of
electrical machine’s control signal connector... 14
Foreword
This standard was drafted in accordance with the rules specified in GB/T
1.1-2009.
This standard was proposed by AND shall be under the jurisdiction of the
National Automotive Standardization Technical Committee (SAC/TC 114).
The drafting organizations of this standard. Shanghai Electric Drive Co., Ltd.,
China Automotive Technology and Research Center, Shanghai Motor
Vehicle Testing Center, China Aviation Optoelectronics Technology Co., Ltd.,
CSR Zhuzhou Electric Locomotive Research Institute Co., Ltd., Beijing
Institute of Technology, BAIC Motor New Energy Automotive Co., Ltd.,
Dongfeng Motor Corporation Technology Center, Zhengzhou Yutong Bus
Co., Ltd., Suzhou Green Environmental Protection Technology Co., Ltd.
Green.
The main drafters of this standard. Gong Jun, Zhang Qin, Meng Xiangfeng,
Liu Yanlin, Wu Xueshun, Guo Shuying, Xu Yandong, Song Qiang, Jiang
Shijun, Liao Yuefeng, Li Bo, Luo Jianwu, Peng Nengling, Yin Jiatong.
Interface of electrical machine system
for electric vehicles
1 Scope
This standard specifies the electrical interface type and signal definition of the
electrical machine system for electric vehicles, AND provides the general
requirements for the mechanical interface of the electrical machine system.
This standard is applicable to the electrical machine system for electric
vehicles, not applicable to the auxiliary machine system for automotive.
2 Normative references
The following documents are essential to the application of this document.
For the dated documents, only the versions with the dates indicated are
applicable to this document; for the undated documents, only the latest
version (including all the amendments) are applicable to this Standard.
GB/T 11918 Plugs, socket – outlet and couplers for industrial purposes -
Part 1.General requirements
GB 14711-2006 Safety requirements of small and medium size rotating
electrical machines
GB/T 18488 General specification of the electrical machines and
controllers for electric vehicles
GB/T 19596 Terminology of electric vehicles
QC/T 417.1 Road vehicles – Connections for on-board electrical wiring
harnesses – Part 1.Definitions, test methods and general performance
requirements (the automobile part)
3 Terms and definitions
The terms as defined in GB/T 19596, QC/T 417.1 AND the following
definitions apply to this standard.
3.1
Electrical interface
It refers to the electrical components which are used to connect the
electrical machine AND the controller, as well as the Controller AND the
complete vehicle, including the power electrical interface AND the signal
electrical interface.
3.2
Mechanical interface
It refers to the connection components which are used to connect the
electrical machine system AND the relevant parts, including the interface
between the electrical machine and the transmissions.
3.3
Cooling pipeline interface
It refers to the cooling pipeline interface between the electrical machine
system AND the complete vehicle.
4 Connection methods
4.1 Electrical interface
4.1.1 General requirements.
The protection against electric shock, grounding measures, enclosure
protection class, AND contact resistance, etc, of the electrical interface shall
be in accordance with the relevant requirements of GB/T 11918;
4.1.2 Connection method of power electrical interface.
The connection methods of power electrical interface include quick
connection method and fixed connection method. The quick connection
method adopts the quick connector for connection purposes; AND the fixed
connection method adopts the connection terminal for connection purposes.
4.1.3 Connection methods of control signal interface.
4.2 Mechanical interface
4.2.1 Installation methods.
The installation methods of the electrical machine AND the controller shall be
determined by the production unit and the user through negotiation, AND it
shall satisfy the shaking resistance AND the protection requirements of
complete vehicle.
4.3 Cooling pipeline connection
Transmission torque (N•m) Modulus (mm) Number of teeth Pitch circle diameter (mm) Pressure angle (o)
As for the electrical machine AND the controller using coolant, it shall, in
accordance with Table 8, select the coolant interface.
Appendix A
(Informative)
Installation dimensions AND installation methods of electrical
machine’s control signal connector
A.1 Installation dimensions AND installation methods of 12-core
electrical machine’s control signal connector
The installation dimensions AND installation methods of 12-core electrical
machine’s control signal connector shall be in accordance with the provisions
of Figure A.1.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of QC/T 896-2011 be delivered?Answer: The full copy PDF of English version of QC/T 896-2011 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of QC/T 896-2011_English with my colleagues?Answer: Yes. The purchased PDF of QC/T 896-2011_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- QC/T 896-2011 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of QC/T 896-2011?A step-by-step guide to download PDF of QC/T 896-2011_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "QC/T 896-2011".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|