QC/T 691-2011 (QC/T691-2011, QCT 691-2011, QCT691-2011)
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
QC/T 691-2011 | English | 85 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Technical specification of single-fuel natural gas vehicle engine
| Valid |
QC/T 691-2011
|
QC/T 691-2002 | English | 559 |
Add to Cart
|
4 days [Need to translate]
|
(Natural gas vehicle fuel engine technology alone condition)
| Obsolete |
QC/T 691-2002
|
Standards related to: QC/T 691-2011
Standard ID | QC/T 691-2011 (QC/T691-2011) | Description (Translated English) | Technical specification of single-fuel natural gas vehicle engine | Sector / Industry | Automobile & Vehicle Industry Standard (Recommended) | Classification of Chinese Standard | T47 | Classification of International Standard | 43.060 | Word Count Estimation | 21,299 | Date of Issue | 2011-05-18 | Date of Implementation | 2011-08-01 | Older Standard (superseded by this standard) | QC/T 691-2002 | Quoted Standard | GB/T 1147.1; GB/T 1859; GB 7258; GB 11340; GB 14023; GB 14097; GB 17691; GB/T 17692; GB/T 17895; GB 18047; GB 18285; GB/T 18297; GB 18352.3; GB/T 19055; GB/T 19204; GB/T 19240; GB/T 20734; GB 20890; GB/T 23335; HJ 438; QC/T 245; QC/T 526; QC/T 755; QC/T 901 | Drafting Organization | China First Automobile Group Corporation Technology Center | Administrative Organization | National Automotive Standardization Technical Committee | Regulation (derived from) | Ministry of Industry and Information Technology Bulletin No. 13 of 2011 | Summary | This standard specifies a single vehicle gas fueled engines (including compressed natural gas and liquefied without liquid injection gas engines) the technical requirements, test methods, inspection rules and signs, packaging, transportation, storage. This standard applies to compressed natural gas tank is not greater than the nominal working pressure 20MPa and liquefied natural gas storage cylinders nominal working pressure is less than 1. 6MPa vehicle with a single fuel engine. |
ICS 43.060
T 47
INDUSTRY STANDARD
OF THE PEOPLE'S REPUBLIC OF CHINA
Replacing QC/T 691-2002
Technical Specification of Single-Fuel
Natural Gas Vehicle Engine
ISSUED ON. MAY 18, 2011
IMPLEMENTED ON. AUGUST 01, 2011
Issued by. Ministry of Industry and Information Technology of the People's
Republic of China
QC
3. No action is required - Full-copy of this standard will be automatically &
immediately delivered to your EMAIL address in 0~60 minutes.
Announcement of
Ministry of Industry and Information Technology of the People's
Republic of China
GONG GAO [2011] No. 13
Ministry of Industry and Information Technology approved 625 professional standards
(standard number, name, main content and implementation date are detailed in Appendix 1)
such as "HV Rectifier Transformer for Electrostatic Precipitator" and one professional
standard amendment for textile (detailed in Appendix 2). Therein. 285 mechanical industry
standards, 22 automotive industry standards, 6 pharmaceutical equipment industry standards,
46 textile industry standards, 16 light industry standards, 19 chemical industry standard, 2
metallurgical industry standards, 34 petrochemical industry standards, 4 ship industry
standards, 1 gold industry standard and 190 communication industry standards are now
announced.
The above-mentioned mechanical industry standards were published by China Machine
Press, automotive, pharmaceutical equipment and chemical industry standards were published
by China Planning Press, textile and gold industry standards were published by China
Standards Press, light industry standards were published by China Light Industry Press,
metallurgical industry standards were published by Metallurgical Industry Press,
petrochemical industry standards were published by China Petrochemical Press, ship industry
standards were organized and published by China Technology Research & Economy
Development Institute and communication industry standards were published by Post &
Telecommunication Press.
Attachment. Numbers, Names and Implementation Date of 22 Professional Standards for
Automobiles
Ministry of Industry and Information Technology of the People's Republic of China
May 18, 2011
Attachment.
Serial Number, Name and Implementation Date of 22 Professional Standards for
Automobiles
No.
Serial number of
the standard
Name
Standard
superseded
Implementation
date
286 QC/T 696-2011
The Centralized Lubrication
System of Automotive Chassis
QC/T 696-2002 2011-08-01
287 QC/T 843-2011
General Specifications for
Limousine
2011-08-01
288 QC/T 844-2011
Technical Specification of
Recliner for Passenger Car
Seats
2011-08-01
289 QC/T 585-2011
Mechanical Jacks of Passenger
Cars
QC/T 585-1999 2011-08-01
290 QC/T 845-2011
Passenger Car - Technique
Specification of Lock for Seat
2011-08-01
291 QC/T 241-2011
Air Leakage Test Methods of
Automobile Wheels for
Tubeless Tires
QC/T 241-1997 2011-08-01
292 QC/T 259-2011
Performance Requirements
and Test Methods of Joint
between Rim and Disc
QC/T 259-1998 2011-08-01
293 QC/T 846-2011
Generic Specifications for
Heavy-duty Flat Transporter
2011-08-01
294 QC/T 847-2011 Sewer Dredge Vehicle 2011-08-01
295 QC/T 848-2011
Hook Loader Container
Handling Device
2011-08-01
296 QC/T 849-2011 Mobile Stage Vehicle 2011-08-01
297 QC/T 319-2011
Power - Take-Off for Special
Purpose Vehicles
QC/T 319-1999 2011-08-01
298 QC/T 693-2011
Technical Specification of
Liquefied Petroleum Gas
Engine
QC/T 693-2002 2011-08-01
299 QC/T 691-2011
Technical Specification of
Single-Fuel Natural Gas
Vehicle Engine
QC/T 691-2002 2011-08-01
300 QC/T 692-2011
Technical Specification of
Gasoline/NG Bi-fuel Engine
QC/T 692-2002 2011-08-01
QC/T
29063.1-2011
Technical Specification for
Auto Manual Transmission
Assembly - Part 1.
Mini-vehicle
QC/T
29063-1992
2011-08-01
302 QC/T 568.1-2011
Rig Testing Method for Auto
Manual Transmission
QC/T 568-1999 2011-08-01
Assembly - Part 1.
Mini-vehicle
303 QC/T 474-2011
Buses-Ride
Comfort-Evaluation Value and
Limits
QC/T 474-1999 2011-08-01
304 QC/T 850-2011
Polyurethane Foam for Seating
of Passenger Car
2011-08-01
305 QC/T 80-2011
Road Vehicles - Polyamide
(PA) Tubing for Air Braking
Systems
QC/T 80-1993 2011-08-01
306 QC/T 851-2011
Reinforcement Adhesive Sheet
for Automobile
2011-08-01
307 QC/T 852-2011
Hemming Adhesive for
Automobile
2011-08-01
Contents
Foreword ... I
1 Scope ... 1
2 Normative References ... 1
3 Terms and Definitions ... 2
4 Technical Requirements ... 2
5 Test Methods ... 4
6 Inspection Rules ... 5
7 Marking, Packaging, Transportation and Storage... 5
Appendix A (Normative) Main Parameters for Single-Fuel Natural Gas Vehicle Engine ... 7
Appendix B (Normative) Vehicle Natural Gas Quality Requirements ... 12
Foreword
This standard supersedes QC/T 691-2002 Technical specification of Single-fuel Natural
Gas Vehicle Engine
The normative references in the former standard have been superseded by other
references; therefore, this revision focuses on the changes of the references. The revision is
concentrated on the drainage requirement and test methods of engine and technical
requirements for special natural gas device and its installation. The revision for this standard
covers the liquefied natural gas engine.
This standard is proposed by and under the jurisdiction of the National Technical
Committee on Road Vehicles of Standardization Administration of China (SAC/TC 114).
Chief drafting organization of this standard. China FAW Group Corporation R & D
Center.
Chief drafting staff of this standard. Dou Huili, Yan Tao, Wang Yu, Yu Guifang.
PROFESSIONAL STANDARD
OF THE PEOPLE'S REPUBLIC OF CHINA
Technical Specification of Single-Fuel Natural Gas
Vehicle Engine
1 Scope
This standard specifies single-fuel natural gas vehicle engine (including compressed
natural gas engine and liquid spray free liquefied natural gas engine) in terms of technical
requirements, test methods, inspection rules and marking, packaging, transport and storage.
This standard is applicable to single-fuel vehicle engine for the following. nominal
working pressure of compressed natural gas cylinder is less than or equal to 20MPa and for
which nominal working pressure of liquefied natural gas cylinder is less than or equal to
1.6MPa.
2 Normative References
The following documents are indispensable for the application of this standard. For dated
reference, only the dated edition applies. For undated documents, the latest edition of the
normative document (including all the amendments) referred to applies.
GB/T 1147.1 Small and Medium Power Internal Combustion Engines - Part 1.
General Requirements
GB/T 1859 Reciprocating Internal Combustion Engines - Measurement of
Emitted Airborne Noise - Engineering Method and Survey Method
GB 7258 Safety Specifications for Power-driven Vehicles Operating on Roads
GB 11340 Limits and Measurement Methods for Crankcase Pollutants from
Heavy-Duty Vehicles Equipped with P.I Engines
GB 14023 Vehicles Boats and Internal Combustion Engine Driven Devices -
Radio disturbance characteristics - Limits and Methods of
Measurement
GB 14097 Noise Limits for Small and Medium Power Diesel Engines
GB 17691 Limits and Measurement Methods for Exhaust Pollutants from
Compression Ignition and Gas Fuelled Positive Ignition Engines of
Vehicles (III, IV, V)
GB/T 17692 Measurement Methods of Net Power for Automotive Engines
GB/T 17895 Natural Gas Vehicle and Liquefied Petroleum Gas Vehicle -
Vocabulary
GB 18047 Compressed Natural Gas as Vehicle Fuel
GB 18285 Limits and Measurement Methods for Exhaust Pollutants from
Vehicles Equipped Ignition Engine under Two-Speed Idle Conditions
and Simple Driving Mode Conditions
GB/T 18297 Performance Test Code for Road Vehicle Engines
GB 18352.3 Limits and Measurement Methods for Emissions from Light-duty
Vehicles (III, IV)
GB/T 19055 Reliability Test Methods for Motor Vehicle Engines
GB/T 19204 General Characteristics of Liquefied Natural Gas
GB/T 19240 Mounting Requirements of Special Equipment for Compressed
Natural Vehicles
GB/T 20734 Mounting Requirements for Liquefied Natural Gas Vehicle Special
Equipment
GB 20890 Test Procedures and Requirements of Durability of Emission Control
Systems for Heavy-Duty Vehicles
GB/T 23335 Natural Gas Vehicles - Engineering Approval Evaluation Program
HJ 438 Durability of Emission Control Systems of Compression Ignition and
Gas Fuelled Positive Ignition Engines of Vehicles
QC/T 245 Technical Specifications for Isolated Plant of Compressed Natural
Gas Vehicle
QC/T 526 Automobile Engine - Engineerin...
......
|