HOME   Cart(0)   Quotation   About-Us Tax PDFs Standard-List Powered by Google www.ChineseStandard.net Database: 189759 (9 Mar 2025)

QC/T 597.1-2017 English PDF (QC/T 597-1999)

QC/T 597.1-2017_English: PDF (QC/T597.1-2017)
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
QC/T 597.1-2017English399 Add to Cart 4 days [Need to translate] Technical conditions for threaded fasteners with adhesive coating -- Part 1: Microencapsulated locking coating Valid QC/T 597.1-2017
QC/T 597-1999English279 Add to Cart 3 days [Need to translate] (Threaded fasteners dry anaerobic adhesive pre-coated microcapsules) Obsolete QC/T 597-1999


BASIC DATA
Standard ID QC/T 597.1-2017 (QC/T597.1-2017)
Description (Translated English) Technical conditions for threaded fasteners with adhesive coating -- Part 1: Microencapsulated locking coating
Sector / Industry Automobile & Vehicle Industry Standard (Recommended)
Word Count Estimation 20,276
Date of Issue 2017-01-09
Date of Implementation 2017-07-01
Older Standard (superseded by this standard) QC/T 597-1999
Regulation (derived from) Ministry of Industry and Information Technology Announcement No.2 of 2017
Summary This standard specifies the terminology, definitions and codes, requirements and tests for non-reusable microcapsule locking layers pre-coated on externally threaded fasteners (bolts, screws and studs) for the purpose of preventing loosening. method. This standard is applicable to bolts made of carbon steel or alloy steel in accordance with GB/T3098.1 and made of stainless steel in accordance with GB/T3098.6. Cross-slot screws below 8.8, hexagonal flower-shaped pan head screws, and screws with low head load capacity can be used as reference. The adhesive layer specified in this standard is suitable for the following occasions:--No need to control the friction coefficient of the adhesion layer;--The friction coefficient of the adhesion layer needs to be controlled;--The friction coefficient and temperature of the adhesion layer need to be controlled at the same time. If the adhesive layer specified in this standard is used only for locking, the provisions of 5.4 and 6.6 may not be used.

BASIC DATA
Standard ID QC/T 597-1999 (QC/T597-1999)
Description (Translated English) (Threaded fasteners dry anaerobic adhesive pre-coated microcapsules)
Sector / Industry Automobile & Vehicle Industry Standard (Recommended)
Classification of Chinese Standard T31
Word Count Estimation 7,715
Date of Issue 1999/11/5
Date of Implementation 2000/7/1
Quoted Standard GB/T 90-1985; GB/T 196-1981; GB/T 197-1981; GB/T 5267-1985; QC/T 326-1999; QC/T 625-1999
Drafting Organization FAW Group Corporation standard factory
Administrative Organization National Automotive Standardization Technical Committee
Summary This standard specifies the threaded fasteners to prevent loose, leakproof for the purpose of pre-coated microcapsules using dry anaerobic adhesive (hereinafter referred to as pre-coated dry glue) classification, glyphs, technical requirements and test methods.

Similar standards: QC/T 597.3-2019  QC/T 597.2-2017  
Similar PDFs (Auto-delivered in 9 seconds): QC/T 597.3-2019  QC/T 600-2023  QC/T 618-2022  QC/T 518-2013