HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

QC/T 1201.2-2023 PDF English

US$230.00 · In stock · Download in 9 seconds
QC/T 1201.2-2023: Compatibility of on-board battery swap system for battery electric commercial vehicles - Part 2: Battery swap cooling interface
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] deliveryName of Chinese StandardStatus
QC/T 1201.2-2023English230 Add to Cart 0-9 seconds. Auto-delivery Compatibility of on-board battery swap system for battery electric commercial vehicles - Part 2: Battery swap cooling interface Valid

Excerpted PDFs (Download full copy in 9 seconds upon purchase)

PDF Preview: QC/T 1201.2-2023
      

Similar standards

QC/T 1201.3   QC/T 1201.1   QC/T 1201.4   QC/T 1217   

QC/T 1201.2-2023: Compatibility of on-board battery swap system for battery electric commercial vehicles - Part 2: Battery swap cooling interface


---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/QCT1201.2-2023
QC AUTOMOBILE INDUSTRY STANDARD ICS 43.020 CCS T 40 Compatibility of on-board battery swap system for battery electric commercial vehicles - Part 2.Battery swap cooling interface Issued on: DECEMBER 20, 2023 Implemented on: DECEMBER 20, 2023 Issued by. Ministry of Industry and Information Technology of the PRC

Foreword

This document was drafted in accordance with the provisions of GB/T 1.1-2020 "Directives for standardization - Part 1.Rules for the structure and drafting of standardizing documents". The document is Part 2 of the QC/T 1201 "Compatibility of on-board battery swap system for battery electric commercial vehicles" series of standards. Battery swap cooling interface. The other 4 parts are as follows. - Part 1.Battery swapping electrical interface; - Part 3.Battery swap cooling interface; - Part 4.Battery swapping systems; - Part 5.Communication between vehicle and battery system. Please note that some of the contents of this document may involve patents. The issuing agency of this document does not assume the responsibility for identifying patents. This document was proposed by AND shall be under the jurisdiction of the National Technical Committee for Automobile Standardization (SAC/TC 114). Drafting organizations of this document. Contemporary Amperex Technology Co., Ltd., China Automotive Technology and Research Center Co., Ltd., Sichuan New Energy Vehicle Innovation Center Co., Ltd., Ningbo Daya Auto Parts Co., Ltd., Suzhou Ruike Connection System Co., Ltd., GCL Energy Technology Co., Ltd., AVIC Optronics Technology Co., Ltd., Shanghai Jiuxing Energy Technology Co., Ltd., China Automotive Research and Development Center for New Energy Vehicles (Tianjin) Co., Ltd., Shanghai Qiyuanxin Power Technology Co., Ltd., BAIC Foton Motor Co., Ltd., Xuzhou XCMG New Energy Vehicle Co., Ltd., FAW Jiefang Automobile Co., Ltd., SAIC Hongyan Automobile Co., Ltd., Hanma Technology Group Co., Ltd., Xi'an Lingchong Chuangxiang New Energy Technology Co., Ltd., Nanjing Kangni New Energy Vehicle Parts Co., Ltd., Zhejiang Jilin Li Yuancheng New Energy Commercial Vehicle Group Co., Ltd., Jinmao Smart Transportation Technology (Xiamen) Co., Ltd., Xuji Group Co., Ltd., Dongfeng Commercial Vehicle Co., Ltd., Shanghai Electric Bus New Energy Technology Co., Ltd., Zhengzhou Yutong Group Co., Ltd., Zhejiang Yuancheng Zhixin Technology Co., Ltd., Anhui Juyi Technology Co., Ltd. The main drafters of this document. Wu Yuanhe, Wang Kangyu, Cao Dongdong, Li Liguo, Pan Haifeng, Yang Guohua, Hou Yanli, Wu Zhiming, Xu Xiao, Xiong Yanfeng, Xu Honggang, Li Yang, Liu Lifang, Zhuang Mingxing, Zhou Zhanfu, Lin Yanzhong, Shao Changhong, Zhang Huan, Juyang, Zhang Jinwei, Wang Yufeng, Liu Xiaoming, Ji Yanwen, Zhang Jianping, Wang Qilong, Tong Lifeng, Liu Xiangli, Li Yichuan, Chen Haibin, Xi Shihong.

Introduction

Battery swapping is one of the important ways to replenish energy for pure electric commercial vehicles. QC/T 1201 Compatibility of on-board battery swap system for battery electric commercial vehicles series of standards aims to standardize the interchangeability of on-board battery swap systems for pure electric commercial vehicles, thereby achieving interchangeability between vehicles, battery swap systems and battery swap stations. This series of standards is intended to consist of 5 parts. - Part 1.Battery swap coupler. The purpose is to standardize the electrical interface of the battery swap system, including the basic requirements for battery swap electrical connections, signal definitions, contact coupling sequence, connection interface, terminal arrangement, dimensional parameters. - Part 2.Battery swap cooling interface. The purpose is to standardize the battery swap cooling interface, including the basic performance requirements of the cooling interface, the structure and dimensions of the cooling interface assembly, the battery end, the vehicle end. - Part 3.Power swapping mechanism. The purpose is to standardize the mechanical interface forms and dimensions such as the gripping interface, bearing surface, guide positioning, locking, etc. of the battery swap battery system, as well as the installation position of the electrical interface and cooling interface, to ensure the gripping performance, guide positioning capability, locking capability of the battery swap battery system, thereby achieving the interchangeability of the battery swap system in terms of structural form. - Part 4.Battery swapping systems. The purpose is to standardize the battery swapping system, including the general requirements, structure, size of the battery swapping system. - Part 5.Communication between vehicles and battery systems. The purpose is to achieve barrier-free communication between vehicles from different manufacturers and batteries from different manufacturers after swapping, by specifying high- voltage architecture, power-on and power-off logic, interactive signals. Compatibility of on-board battery swap system for battery electric commercial vehicles - Part 2.Battery swap cooling interface

1 Scope

This document specifies the general requirements and structural dimension requirements for the cooling interface of the on-board battery swap system of pure electric commercial vehicles with back-type battery swap. This document is applicable to category N2 and N3 pure electric vehicles with overall battery swap of back-type battery system. Other forms of battery swap vehicles can make reference to this document.

2 Normative references

The contents of the following documents constitute the essential terms of this document through normative references in the text. Among them, for dated references, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies to this document. GB/T 19596 Terminology of electric vehicles GB/T 40032-2021 Safety requirements of battery swap for electric vehicles

3 Terms and definitions

The terms and definitions defined in GB/T 19596, as well as the following terms and definitions, apply to this document. 3.1 Swapable battery system During the battery swap process, the power battery system that is replaced as a whole, which generally includes. power battery, battery management system, battery bracket, battery swap electrical interface, battery swap mechanical interface, etc.; it can be charged and discharged in the off-board state. 3.2 ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.


      

Tips & Frequently Asked Questions

Question 1: How long will the true-PDF of English version of QC/T 1201.2-2023 be delivered?

Answer: The full copy PDF of English version of QC/T 1201.2-2023 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of QC/T 1201.2-2023_English with my colleagues?

Answer: Yes. The purchased PDF of QC/T 1201.2-2023_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. www.ChineseStandard.us -- QC/T 1201.2-2023 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

How to buy and download a true PDF of English version of QC/T 1201.2-2023?

A step-by-step guide to download PDF of QC/T 1201.2-2023_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "QC/T 1201.2-2023".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9