QC/T 1099-2018 PDF English
US$170.00 · In stock · Download in 9 secondsQC/T 1099-2018: Specification for collapsible spacer used in automotive drive head assembly Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| QC/T 1099-2018 | English | 170 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Specification for collapsible spacer used in automotive drive head assembly
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: QC/T 1099-2018
QC/T 1099-2018: Specification for collapsible spacer used in automotive drive head assembly---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/QCT1099-2018
QC
AUTOMOBILE INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 43.040.50
T 21
Specification for collapsible spacer used in automotive drive
head assembly
ISSUED ON: JULY 04, 2018
IMPLEMENTED ON: JANUARY 01, 2019
Issued by: Ministry of Industry and Information Technology of PRC
Table of Contents
Foreword ... 5
1 Scope ... 6
2 Normative references ... 6
3 Terms and definitions ... 6
4 Technical requirements ... 7
5 Detection method ... 10
Specification for collapsible spacer used in automotive drive
head assembly
1 Scope
1.1 This standard specifies the technical requirements and testing methods for the
collapsible spacer used in automotive drive head assembly.
1.2 This standard is applicable to spacers used in automotive drive head assembly,
which have a total mass not greater than 10000 kg.
2 Normative references
The following documents are essential to the application of this document. For the dated
documents, only the versions with the dates indicated are applicable to this document;
for the undated documents, only the latest version (including all the amendments) is
applicable to this standard.
GB/T 699-2015 Quality carbon structural steels
GB/T 1958 Geometrical product specifications (GPS) - Geometrical tolerance -
Verification
3 Terms and definitions
The following terms and definitions apply to this standard.
3.1
Collapsible spacer
Collapsible spacers whose middle part adopt a drum-shaped structure, which has
elastic deformation characteristics AND is used in the plastic deformation area.
In this standard, unless there is a special statement, the collapsible spacer is referred
to as the spacer for short.
3.2
Pressure-delta characteristic curve
The relationship between the load (P) and the deformation (δ), when the spacer is
compressed under a certain load, is called mechanical characteristic; the curve (P-δ)
formed by it is called the pressure-delta characteristic curve.
3.3
Pressure-delta characteristic figure
The range, which is allowed by the pressure-delta characteristic curve of the spacer,
is called pressure-delta characteristic figure.
3.4
Springback value (T)
The difference -- BETWEEN the height of the spacer under compression
deformation AND the height after the pressure is released -- is called the springback.
4 Technical requirements
4.1 Materials
4.1.1 The material of the spacer is recommended to use high-quality carbon steel 10,
20, in accordance with the provisions of GB/T 699-2015.
4.1.2 It is allowed to use other materials, that can meet the requirements of this standard.
4.2 Dimensions and tolerances
4.2.1 Refer to Figure 1 for the schematic diagram of spacer type.
5 Detection method
5.1 Geometric tolerance
Geometric tolerances shall be tested in accordance with the provisions of GB/T 1958.
5.2 Performance test
5.2.1 Test requirements
5.2.1.1 Measurement temperature: Measured at room temperature.
5.2.1.2 Pressure testing machine: The pressure range of the equipment is not greater
than 30000 kg; the error of the load measurement indication value shall not be greater
than ±1%.
5.2.1.3 The measurement error of equipment size shall not be greater than ±0.01 mm.
5.2.1.4 Compression speed: 0.5 ~ 1.5 mm/min.
5.2.2 Spacer compression test
As shown in Figure 3, place the spacer at the center of the workbench of the pressure
testing machine. Load the spacer, until the compression deformation is greater than δ2.
Record the load P, corresponding to different compressive deformation δ, including not
less than 10 measurement points; meanwhile it shall include the compressive
deformation value at Pmin and the actual load value under the δ2 compressive
deformation. Draw the pressure-delta characteristic curve of the spacer (see Figure 4).
Figure 3 -- Schematic diagram of spacer compression
Bench
Indenter
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of QC/T 1099-2018 be delivered?Answer: The full copy PDF of English version of QC/T 1099-2018 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of QC/T 1099-2018_English with my colleagues?Answer: Yes. The purchased PDF of QC/T 1099-2018_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- QC/T 1099-2018 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of QC/T 1099-2018?A step-by-step guide to download PDF of QC/T 1099-2018_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "QC/T 1099-2018".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |