QC/T 1067.2-2017 (QC/T1067.2-2017, QCT 1067.2-2017, QCT1067.2-2017)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| QC/T 1067.2-2017 | English | 145 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Connector used in automobile wire harness and electrical device -- Part 2: Type and dimension of the male terminal
| Valid |
QC/T 1067.2-2017
|
Standards related to: QC/T 1067.2-2017
| Standard ID | QC/T 1067.2-2017 (QC/T1067.2-2017) | | Description (Translated English) | Connector used in automobile wire harness and electrical device -- Part 2: Type and dimension of the male terminal | | Sector / Industry | Automobile & Vehicle Industry Standard (Recommended) | | Classification of Chinese Standard | T47 | | Word Count Estimation | 12,141 | | Date of Issue | 2017-01-09 | | Date of Implementation | 2017-07-01 | | Older Standard (superseded by this standard) | QC/T 417.5-2001; QC/T 417.4-2001; QC/T 417.3-2001 | | Regulation (derived from) | Ministry of Industry and Information Technology Announcement No.2 of 2017 | | Summary | This standard specifies the type and size of the chip and cylindrical plug terminals. | QC/T 1067.2-2017
QC
AUTOMOBILE INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 43.040.10
T 36
Replacing QC/T 417.3-2001, QC/T 417.4-2001, QC/T 417.5-2001
Connector used in automobile wire harness and
electrical device - Part 2. Type and dimension of the
male terminal
ISSUED ON. JANUARY 9, 2017
IMPLEMENTED ON. JULY 1, 2017
Issued by. Ministry of Industry and Information Technology of the
People's Republic of China
Table of Contents
Announcement ... 3
Foreword ... 9
1 Scope ... 11
2 Normative references ... 11
3 Terms and definitions ... 11
4 Types and dimensions ... 11
Annex.
References, names and dates of implementation of 42 automotive industry
standards
No. Standard reference Standard name
Standard
reference being
substituted
Date of
implementation
250 QC/T 776-2017 Motor caravan QC/T 776-2007 2017-07-01
251 QC/T 1051-2017 Coach car 2017-07-01
252 QC/T 1052-2017 Communication vehicle 2017-07-01
253 QC/T 1053-2017 Concrete spraying vehicle 2017-07-01
254 QC/T 1054-2017 Tunnel cleaning vehicle 2017-07-01
255 QC/T 1055-2017 Drainage and rescue vehicle 2017-07-01
256 QC/T 218-2017
Technical
specifications for
steering column
upper combined
switch of automobile
QC/T 218-1996 2017-07-01
257 QC/T 1056-2017
Technical
requirements and test
methods for
automotive dual
clutch automatic
transmission
assembly
2017-07-01
258 QC/T 245-2017
Technical
specifications for
isolated plant of
compressed-natural-
gas (CNG)
automobile
QC/T 245-2002 2017-07-01
259 QC/T 247-2017
Technical
specifications for
isolated plant of
liquefied petroleum
gas
QC/T 247-2002 2017-07-01
260 QC/T 1057-2017 Car snow chains 2017-07-01
261 QC/T 1058-2017 Car fingerprint identification device 2017-07-01
273 QC/T 1060-2017
Automotive
hexagonal flower
flange bolts
2017-07-01
274 QC/T 1061-2017
Road transport
lightweight fuel tank
vehicle anti-overflow
system
2017-07-01
275 QC/T 1062-2017
Road transport
lightweight fuel tank
vehicle unloading
valve
2017-07-01
276 QC/T 1063-2017
Road transport
lightweight fuel tank
vehicle oil and gas
recovery components
2017-07-01
277 QC/T 1064-2017
Road transport
flammable liquid
dangerous goods
tank vehicle -
breathing valve
2017-07-01
278 QC/T 1065-2017
Road transport
flammable liquid
dangerous goods
tank vehicle -
manhole cover
2017-07-01
279 QC/T 789-2017
Performance
requirements and
bench test methods
of automobile electric
vortex retarder
assembly
QC/T 789-2007 2017-07-01
280 QC/T 316-2017
Bench test methods
of fatigue strength for
automobile service
brake
QC/T 316-1999 2017-07-01
281 QC/T 201-2017
Nylon pipe joint size
for automobile air
brake
QC/T 201-1995 2017-07-01
282 QC/T 1066-2017
Performance
requirements of cable
assembly for vehicle
parking brakes and
bench test method
2017-07-01
Foreword
QC/T 417-2001 “Road vehicles - connections for on-board electrical wiring
harnesses” consists of 5 parts.
- Part 1. Definitions, Test Methods and General Performance Requirements
(the Automobile Part);
- Part 2. Test Methods and General Performance Requirements (Motorcycle
Part);
- Part 3. Taps for Single-pole Connections- Dimensions and Specific
Requirements;
- Part 4. Tabs for Multi-pole Connections - Dimensions and Specific
Requirements;
- Part 5. Column Tabs for Single- and Multi-pole Connections - Dimensions
and Specific Requirements.
This Standard is Part 2 of QC/T 417-2001.
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009
“Directives for standardization - Part 1. Structure and drafting of standards”.
This Standard is a revision of QC/T 417.3-2001 “Road Vehicles - Connections
for On-board Electrical Wiring Harnesses- Part 3. Taps for Single-pole
Connections - Dimensions and Specific Requirements”, QC/T 417.4-2001
“Road Vehicles - Connections for on-board Electrical Wiring Harnesses - Part
4. Tabs for Multi-pole Connections - Dimensions and Specific Requirements”,
QC/T 417.5-2001 “Road vehicles - connections for on-board electrical wiring
harnesses - Part 5 Column Tabs for Single- and Multi-pole Connections -
Dimensions and Specific Requirements”. Compared with QC/T 417.3.4.5-2001,
the main changes in this Standard are as follows.
- combined QC/T 417.3 2001, QC/T 417.4-2001, QC/T 417.5-2001 into one
standard with a name as “Type and dimension of the male terminal”;
- deleted “5 Special performance requirements” and “6 Notes” in QC/T 417.3
2001, QC/T 417.4-2001, QC/T 417.5-2001;
- deleted Annex A in QC/T 417.3;
- deleted "3×0.64" plug specifications in QC/T 417.4;
- modified Figure 1 in QC/T 417.4, deleted continuous reinforcement
structure.
Connector used in automobile wire harness and
electrical device - Part 2. Type and dimension of the
male terminal
1 Scope
This Standard specifies the types and dimensions of slice and cylindrical male
terminals.
This Standard is applicable to the single and multi-wire connectors in
automotive wiring harnesses and electrical equipment.
2 Normative references
The following referenced documents are indispensable for the application of
this document. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any
amendments) applies.
GB/T 1067.1-2017, Connectors for automotive wiring harnesses and
electrical equipment - Part 1. Definitions, test methods general performance
requirements
3 Terms and definitions
For the purposes of this document, the terms and definitions defined in QC/T
1067.1-2017 apply.
4 Types and dimensions
4.1 Types and dimensions of Type A slice male terminal
The types and dimensions of Type A slice male terminal shall comply with
Figure 1 and Table 1. Unspecified details are determined by the producer.
...
|