QC/T 1060-2017 (QC/T1060-2017, QCT 1060-2017, QCT1060-2017)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| QC/T 1060-2017 | English | 150 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Hexalobular bolts with flange for automobile
| Valid |
QC/T 1060-2017
|
Standards related to: QC/T 1060-2017
| Standard ID | QC/T 1060-2017 (QC/T1060-2017) | | Description (Translated English) | Hexalobular bolts with flange for automobile | | Sector / Industry | Automobile & Vehicle Industry Standard (Recommended) | | Classification of Chinese Standard | T31 | | Word Count Estimation | 16,182 | | Date of Issue | 2017-01-09 | | Date of Implementation | 2017-07-01 | | Regulation (derived from) | Ministry of Industry and Information Technology Announcement No.2 of 2017 | | Summary | This standard specifies the hexagonal flower-shaped flange bolts for automobiles with M5~M20 thread specifications, performance grades 8.8, 10.9, and product grades A and B. Class A is used for l �� 10d or l �� 150mm (small value); Class B is used for bolts with l>10d or l>150mm (smaller value). This standard is applicable to the anti-overflow system installed on road transport tank vehicles. The transport medium is limited to diesel or light fuel oil (UN No. 1202), motor gasoline (UN No. 1203) and kerosene (UN No. 1223) as defined in GB12268. ). | QC/T 1060-2017
AUTOMOBILE INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 43.160
T 31
Hexalobular Bolts with Flange for Automobile
ISSUED ON: JANUARY 09, 2017
IMPLEMENTED ON: JULY 01, 2017
Issued by: Ministry of Industry and Information Technology of PRC
Table of Contents
Announcement ... 3
Foreword ... 9
1 Scope ... 10
2 Normative References ... 10
3 Type and Dimension ... 11
4 Technical Conditions ... 16
5 Product Number ... 17
262 QC/T 1059-2017
Automobile cab
torsion bar type flip
and lock mechanism
2017-07-01
263 QC/T 32-2017
Test methods of air
cleaners for
automobiles
QC/T 32-2006 2017-07-01
264 QC/T 597.1-2017
Threaded fasteners -
Pre - coated adhesive
- Technical
requirements - Part 1:
Microcapsule locking
layer
QC/T 597-2017 2017-07-01
265 QC/T 597.2-2017
Threaded fasteners -
Pre - coated adhesive
- Technical
requirements - Part 2:
Polyamide locking
layers
2017-07-01
266 QC/T 1-2017
Basic requirements
for automobile
products drawing
QC/T 1-1992 2017-07-01
267 QC/T 2-2017 Drawing format of automobiles QC/T 2-1992 2017-07-01
268 QC/T 3-2017
Completeness of
drawings and design
documents about
automobiles
QC/T 3-1992 2017-07-01
269 QC/T 4-2017
Method for change
about product
drawing and design
document regulations
of automobile
QC/T 4-1992 2017-07-01
270 QC/T 5-2017
Standardization
examination for
automobile product
drawings and design
documents
QC/T 5-1992 2017-07-01
271 QC/T 18-2017
Automobile products
drawing and design
documents - Terms
QC/T 18-1992 2017-07-01
272 QC/T 340-2017
Hexagon flange
bearing surface with
tooth bolt
QC/T 340-1999 2017-07-01
283 QC/T 1067.1-2017
Road Vehicles -
Connections for On-
board Electrical
Wiring Harnesses -
Part 1: Definitions,
Test Methods and
General Performance
Requirements (the
Automobile Part)
QC/T 417.1-
2001 2017-07-01
284 QC/T 1067.2-2017
Automotive
connectors for
electrical harnesses
and electrical
equipment - Part 2:
Types and
dimensions of plug
terminals
QC/T 417.3-
2001
QC/T 417.4-
2001
QC/T 417.5-
2001
2017-07-01
285 QC/T 1067.3-2017
Automotive
connectors for
electrical harnesses
and electrical
equipment - Part 3:
Wire connector type,
size and special
requirements
QCn 29010-
1991
QCn 29011-
1991
QCn 29013-
1991
2017-07-01
286 QC/T 1068-2017
Asynchronous drive
motor system for
electric vehicles
2017-07-01
287 QC/T 1069-2017
Permanent magnet
synchronous drive
motor system for
electric vehicles
2017-07-01
288 QC/T 1070-2017
Technical
specifications of
automobile parts
remanufactured
products
2017-07-01
289 QC/T 1071-2017
Test method for
steady state flow
characteristics of
automotive engine
cylinder head airways
2017-07-01
Hexalobular Bolts with Flange for Automobile
1 Scope
This Standard specifies the hexalobular bolts with flange for automobile with thread
specification of M5~M20, performance level of Level-8.8 and Level-10.9, the product
grade of Grade-A and Grade-B. Grade-A is used for bolt with l≤10d or l≤150mm (as
per whichever is smaller); while Grade-B is used for bolt with l>10d or l>150mm (as
per whichever is smaller).
2 Normative References
The following documents are essential to the application of this document. For the
dated documents, only the versions with the dates indicated are applicable to this
document; for the undated documents, only the latest version (including all the
amendments) are applicable to this document.
GB/T 2 Fasteners – Ends of Parts with External Thread
GB/T 90.1 Fasteners – Acceptance Inspection
GB/T 90.2 Fasteners – Marking and Packaging
GB/T 193 General Purpose Screw Threads – Diameters and Pitches
GB/T 3098.1 Mechanical Properties of Fasteners - Bolts, Screws and Studs
GB/T 3103.1 Tolerances for Fasteners – Bolts, Screws, Studs and Nuts
GB/T 5779.1 Fasteners - Surface Discontinuities - Bolts, Screws and Studs for
General Requirements
GB/T 9145 General Purpose Metric Screw Threads - Limits of Sizes for the Screw
Threads of Medium Quality and Preferable Plan
QC/T 326 Coding Rules for Automotive Standardized Parts
QC/T 625 Metallic Coatings and Conversion Coatings for Automobiles
QC/T 6189 Hexalobular Type-E for Fasteners
...
|