HOME   Cart(0)   Quotation   About-Us Tax PDFs Standard-List Powered by Google www.ChineseStandard.net Database: 189759 (27 Oct 2024)

QB/T 4340-2012 English PDF

QB/T 4340-2012 (QB/T4340-2012, QBT 4340-2012, QBT4340-2012)
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
QB/T 4340-2012English70 Add to Cart 0--9 seconds. Auto-delivery Footwear. Chemical test method. Total heavy metal content. Inductively coupled plasma emission spectroscopy Valid QB/T 4340-2012
Preview PDF: QB/T 4340-2012

BASIC DATA
Standard ID QB/T 4340-2012 (QB/T4340-2012)
Description (Translated English) Footwear. Chemical test method. Total heavy metal content. Inductively coupled plasma emission spectroscopy
Sector / Industry Light Industry Industry Standard (Recommended)
Classification of Chinese Standard Y78
Classification of International Standard 61.060
Word Count Estimation 6,696
Quoted Standard GB/T 6682-2008; GB/T 22049; GB/T 29292-2012
Drafting Organization Jiaxing City Institute fur and footwear industry
Administrative Organization National Standardization Technical Committee footwear
Regulation (derived from) ?MIIT Announcement 2012 No.20; Industry Standard Filing Announcement 2012 No.7 (Total No.151);
Summary This standard specifies test methods for footwear and footwear components of the total content of heavy metals-Inductively coupled plasma atomic emission spectrometry for nine heavy metals lead (Pb), cadmium (Cd), Nickel (Ni), chromium (Cr), cobalt (Co),


QB/T 4340-2012 QB LIGHT INDUSTRY STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 61.060 Classification No.: Y78 Filing No.: 36743-2012 Footwear - Chemical test method - Total heavy metal content - Inductively coupled plasma emission spectroscopy ISSUED ON: MAY 24, 2012 IMPLEMENTED ON: NOVEMBER 01, 2012 Issued by: Ministry of Industry and Information Technology of PRC Table of Contents Foreword ... 3  1 Scope ... 4  2 Normative references ... 4  3 Principle ... 4  4 Reagents ... 5  5 Instruments and equipment... 6  6 Specimen preparation and environmental conditioning ... 6  7 Test procedure ... 7  8 Blank test ... 8  9 Result calculation ... 8  10 Determination of recovery rate ... 8  11 Report ... 8  12 Detection limit ... 9  13 Precision ... 9  14 Test report ... 9  Footwear - Chemical test method - Total heavy metal content - Inductively coupled plasma emission spectroscopy 1 Scope This standard specifies the test method for the total content of heavy metals in footwear products and footwear components - The measurement method for the content of nine heavy metals: lead (Pb), cadmium (Cd), nickel (Ni), chromium (Cr), cobalt (Co), copper (Cu), antimony (Sb), arsenic (As), mercury (Hg), by inductively coupled plasma emission spectrometry1). This standard applies to all footwear and footwear components. Table 1 of GB/T 29292-2012 specifies the materials, which contain this substance. 2 Normative references The following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) is applicable to this standard. GB/T 6682 -2008 Water for analytical laboratory use - Specification and test methods GB/T 22049 Footwear - Standard atmospheres for conditioning and testing of footwear and components for footwear GB/T 29292-2012 Footwear - Critical substances potentially present in footwear and footwear components 3 Principle After the sample is digested by microwave, the volume of the digestion solution is made to reach to the mark. The concentration of heavy metals, such as lead (Pb), cadmium (Cd), nickel (Ni), chromium (Cr), cobalt (Co), copper (Cu), 1) Inductively coupled plasma emission spectroscopy is generally referred to as ICP-OES. flask. Dilute to the mark. 4.4.7 Lead (Pb) standard stock solution (100 μg/mL): Weigh 0.160 g of lead nitrate [(Pb(NO3)2)]. Use 10 mL of nitric acid solution (1 + 9) to dissolve it. Transfer it to a 1000 mL volumetric flask. Dilute to the mark. 4.4.8 Antimony (Sb) standard stock solution (100 μg/mL): Weigh 0.274 g of potassium antimony tartrate (C4H4KO7Sb • 1/2H2O). Dissolve it in 10% hydrochloric acid solution. Transfer it into a 1000 mL volumetric flask. Use 10% hydrochloric acid solution to dilute it to the mark. 4.4.9 Mercury (Hg) standard stock solution (100 μg/mL): Weigh 0.1354 g of mercury chloride (HgCl2). Put it into a 100 mL beaker. Add 20 mL of nitric acid solution (1 + 1). Heat it at low temperature to dissolve it. Cool it down. Transfer it into a 1000 mL volumetric flask. Add 40 mL of nitric acid solution (1 + 1), 20 mL of 5.0% potassium dichromate solution. Use distilled water to make its volume reach to the mark. Shake it well. This solution is 100 μg/mL mercury standard stock solution. 4.5 Standard working solution: Prepare the standard working solution of each heavy metal. The standard working solution is stored at 15 °C ~ 25 °C in the dark. The validity period is 7 days. 5 Instruments and equipment 5.1 Analytical balance, which has an accuracy of 0.1 mg. 5.2 The inductively coupled plasma emission spectrometer: The purity of argon gas used is not less than 99.9%. 5.3 The microwave digester, which has temperature or pressure control system. 6 Specimen preparation and environmental conditioning Use a standard cutter 2) to cut 10 g of sample, into a small test piece, which has a size of about 5 mm x 5 mm. Perform environmental conditioning, according to the requirements of GB/T 22049. The conditioning time is 24 h. When the thickness of the sample exceeds 5 mm, it shall be processed to be within 5 mm. 2) Information about standard cutters can be obtained from the SAC/TC 305 Secretariat. This information is given for the convenience of users of this standard. It does not indicate an endorsement of the product. If other equivalent products have the same effect, these equivalent products can be used. ......