QB/T 2952-2008 PDF English
US$70.00 · In stock · Download in 9 secondsQB/T 2952-2008: Requirements for detergent marks and packaging Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| QB/T 2952-2008 | English | 70 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Requirements for detergent marks and packaging
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: QB/T 2952-2008
QB/T 2952-2008: Requirements for detergent marks and packaging---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/QBT2952-2008
QB
LIGHT INDUSTRY STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 71.100.35
Class no.. Y08
Record no.. 24044-2008
Requirements for Detergent Marking and Packaging
Issued on. MARCH 12, 2008
Implemented on. SEPTEMBER 1, 2008
Issued by. Development and Reform Commission of the People’s
Republic of China
Table of Contents
Foreword... 3
1 Application Scope... 4
2 Normative References... 4
3 Terms... 4
4 Marking... 5
5 Packaging... 8
6 Test Method... 9
Foreword
This Standard was proposed by China National Light Industry Council.
This Standard shall be under the jurisdiction of the National Standardization Centre on
Surface Active Agents and Detergents.
The drafting organizations of this Standard. National Cleaning Products Quality
Supervision and Inspection Center (Taiyuan), Nice Group Co., Ltd.
The main drafters of this Standard. Li Xiaohui, Xu Youqi.
This Standard is issued for the first time.
Requirements for Detergent Marking and Packaging
1 Application Scope
This Standard specifies the requirements for the marking and packaging of all kinds of
detergents including laundry powders, laundry detergents, laundry soaps, toilet soaps,
dish washing detergents, bath lotions and hand lotions.
This Standard applies to the marking and packaging of all kinds of detergents including
laundry powders, laundry detergents, laundry soaps, toilet soaps, dish washing
detergents, bath lotions and hand lotions.
2 Normative References
The provisions in following documents become the provisions of this Standard through
reference in this Standard. For dated references, the subsequent amendments
(excluding corrigendum) or revisions do not apply to this Standard, however, parties
who reach an agreement based on this Standard are encouraged to study if the latest
versions of these documents are applicable. For undated references, the latest edition
of the referenced document applies.
GB/T 191, Packaging – Pictorial Marking for Handling of Goods
GB 12904, Bar Code for Commodity - Retail Commodity Numbering and Bar Code
Marking
3 Terms
For the purposes of this document, the following terms apply.
3.1
mark
A joint name of all kinds of expressions which is used to identify products and their
mass, quantity, characteristics and use method. It can be expressed with words,
symbols, numbers, patterns and other exponents.
3.2
label
A carrier of marking which can be pasted or printed on marketing package.
3.3
marketing packaging
Packaging which is mainly for the purpose of marketing and comes to the consumers
along with its content.
3.4
transportation packing
Packing which is mainly for the purpose of transportation, contains several articles of
consumption and plays a role for the convenience of storage and transportation and
enhancement of protection.
3.5
net contents
The actual mass or volume of contents after subtracting packing containers and other
packing materials.
4 Marking
4.1 Forms
4.2 Basic requirements
4.3 Annotation content
4.3.1 Product name
A general name complying with product standards, or a special name reflecting the
true nature which is clear and easy to understand, shall be marked clearly in a striking
position of product label. A common name or popular name which will not cause
misleading or confusion.
4.3.5 Manufacturing date and guaranteed term
4.3.5.1 When it is required by laws or regulations or products’ explicit standards or
the manufacturer needs to mark, marking is provided in accordance with one of the
following two methods.
4.3.7 Product type and quality grade
When the product type and quality grade are specified in the product standard, the
product type and quality grade shall be marked as specified in the product standard.
4.3.8 Mark and number of production license
The products which are subjected to production license, shall be marked with valid
production license mark and number.
4.4 Marking content
4.4.1 Place of manufacturer, which shall be true.
4.5 Marketing packaging
4.5.1 The marketing packaging shall be as specified in 4.3 and 4.4.
4.5.2 When the area of the maximum surface of product package is less than 10 cm2,
it is acceptable that only product name, manufacturer name, manufacturing date and
guaranteed terms are marked, and the other content is marked on the additional
exponents.
4.5.3 Products of nude packing may be left without marking.
4.6 Transportation packaging
5 Packaging
5.1 Classification
The product package is divided into two varieties in accordance with the function.
marketing package and transportation package.
5.2 Requirements for packaging materials
5.3 Requirements for package appearance
5.3.1 Classification of packaging defects
The quality defects of product package are divided into categories A and B. category
A includes general quality defects; category B includes minor quality defects.
5.3.2 Printing and labelling
All indexes of product printing and labelling shall be as specified in Table 1.
6 Test Method
Visual inspection.
QB/T 2952-2008
QB
LIGHT INDUSTRY STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 71.100.35
Class no.. Y08
Record no.. 24044-2008
Requirements for Detergent Marking and Packaging
Issued on. MARCH 12, 2008
Implemented on. SEPTEMBER 1, 2008
Issued by. Development and Reform Commission of the People’s
Republic of China
Table of Contents
Foreword... 3
1 Application Scope... 4
2 Normative References... 4
3 Terms... 4
4 Marking... 5
5 Packaging... 8
6 Test Method... 9
Foreword
This Standard was proposed by China National Light Industry Council.
This Standard shall be under the jurisdiction of the National Standardization Centre on
Surface Active Agents and Detergents.
The drafting organizations of this Standard. National Cleaning Products Quality
Supervision and Inspection Center (Taiyuan), Nice Group Co., Ltd.
The main drafters of this Standard. Li Xiaohui, Xu Youqi.
This Standard is issued for the first time.
Requirements for Detergent Marking and Packaging
1 Application Scope
This Standard specifies the requirements for the marking and packaging of all kinds of
detergents including laundry powders, laundry detergents, laundry soaps, toilet soaps,
dish washing detergents, bath lotions and hand lotions.
This Standard applies to the marking and packaging of all kinds of detergents including
laundry powders, laundry detergents, laundry soaps, toilet soaps, dish washing
detergents, bath lotions and hand lotions.
2 Normative References
The provisions in following documents become the provisions of this Standard through
reference in this Standard. For dated references, the subsequent amendments
(excluding corrigendum) or revisions do not apply to this Standard, however, parties
who reach an agreement based on this Standard are encouraged to study if the latest
versions of these documents are applicable. For undated references, the latest edition
of the referenced document applies.
GB/T 191, Packaging – Pictorial Marking for Handling of Goods
GB 12904, Bar Code for Commodity - Retail Commodity Numbering and Bar Code
Marking
3 Terms
For the purposes of this document, the following terms apply.
3.1
mark
A joint name of all kinds of expressions which is used to identify products and their
mass, quantity, characteristics and use method. It can be expressed with words,
symbols, numbers, patterns and other exponents.
3.2
label
A carrier of marking which can be pasted or printed on marketing package.
3.3
marketing packaging
Packaging which is mainly for the purpose of marketing and comes to the consumers
along with its content.
3.4
transportation packing
Packing which is mainly for the purpose of transportation, contains several articles of
consumption and plays a role for the convenience of storage and transportation and
enhancement of protection.
3.5
net contents
The actual mass or volume of contents after subtracting packing containers and other
packing materials.
4 Marking
4.1 Forms
4.2 Basic requirements
4.3 Annotation content
4.3.1 Product name
A general name complying with product standards, or a special name reflecting the
true nature which is clear and easy to understand, shall be marked clearly in a striking
position of product label. A common name or popular name which will not cause
misleading or confusion.
4.3.5 Manufacturing date and guaranteed term
4.3.5.1 When it is required by laws or regulations or products’ explicit standards or
the manufacturer needs to mark, marking is provided in accordance with one of the
following two methods.
4.3.7 Product type and quality grade
When the product type and quality grade are specified in the product standard, the
product type and quality grade shall be marked as specified in the product standard.
4.3.8 Mark and number of production license
The products which are subjected to production license, shall be marked with valid
production license mark and number.
4.4 Marking content
4.4.1 Place of manufacturer, which shall be true.
4.5 Marketing packaging
4.5.1 The marketing packaging shall be as specified in 4.3 and 4.4.
4.5.2 When the area of the maximum surface of product package is less than 10 cm2,
it is acceptable that only product name, manufacturer name, manufacturing date and
guaranteed terms are marked, and the other content is marked on the additional
exponents.
4.5.3 Products of nude packing may be left without marking.
4.6 Transportation packaging
5 Packaging
5.1 Classification
The product package is divided into two varieties in accordance with the function.
marketing package and transportation package.
5.2 Requirements for packaging materials
5.3 Requirements for package appearance
5.3.1 Classification of packaging defects
The quality defects of product package are divided into categories A and B. category
A includes general quality defects; category B includes minor quality defects.
5.3.2 Printing and labelling
All indexes of product printing and labelling shall be as specified in Table 1.
6 Test Method
Visual inspection.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of QB/T 2952-2008 be delivered?Answer: The full copy PDF of English version of QB/T 2952-2008 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of QB/T 2952-2008_English with my colleagues?Answer: Yes. The purchased PDF of QB/T 2952-2008_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- QB/T 2952-2008 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of QB/T 2952-2008?A step-by-step guide to download PDF of QB/T 2952-2008_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "QB/T 2952-2008".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|