QB/T 2903-2007 PDF English
US$70.00 · In stock · Download in 9 secondsQB/T 2903-2007: Jar candle Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| QB/T 2903-2007 | English | 70 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Jar candle
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: QB/T 2903-2007
QB/T 2903-2007: Jar candle---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/QBT2903-2007
ICS 71.100.35
Y44
QB
Industry Standard
of the People’s Republic of China
Jar Candle
ISSUE ON. DECEMBER 3, 2007
Implemented on. JUNE 1, 2008
Issued by. National Development and Reform Commission, the People’s Republic of
China
Table of Contents
Foreword... 3
1 Scope... 4
2 Normative References... 4
3 Terms and Definitions... 4
4 Requirements... 4
5 Test Methods... 5
6 Inspection Rules... 8
7 Signs, Packaging, Transportation, Storage, and Shelf Life... 9
Foreword
Jar Candle series product is one of the main products of the candle industry. In order to
ensure product quality, this industry standard is developed.
This Standard was drafted with reference to the German standard RAL-GZ 041/1 (2005)
(General Quality and Inspection Specifications for candles), and the American Material and
Testing Association standard ASTM F 2417-2004 (Standard Specification for Fire Safety for
Candles).
This Standard was proposed by China Light Industry Federation.
This Standard is under the jurisdiction of the National Toothpaste and Wax Product
Standardization Center.
Main drafting organizations of this Standard. Qingdao Jinwang Chemistry Co., Ltd.,
Zhongnan Candle Co., Ltd., Quan Wei Candle Co., Ltd., Dingzhou City Jinqiao Candles
Co., Ltd., and National Light Industry Toothpaste and Wax Product Quality Supervision and
Inspection Center.
Main drafters of this Standard. Jiang Ying, Gan Dongshen, and Wang Chuanlei.
This Standard is published in its first-time.
Jar Candle
1 Scope
This Standard specifies the jar candle’s terms and definitions, requirements, test methods,
inspection rules, signs, packaging, transportation, storage, and shelf life.
This Standard applies to jar candle products.
2 Normative References
The following documents contain provisions which, through reference in this Standard,
become provisions of this Standard. For dated reference, subsequent amendments
(excluding the correction) or revisions of these publications do not apply to this Standard.
However, parties who enter into agreement based on this Standard are encouraged to
investigate the possibility of applying the most recent editions of the standards indicated
below. For undated references, the latest edition of the reference document is applicable to
this Standard.
GB/T 191 Packaging - Pictorial marking
Decree 75, State Administration of Quality Inspection and Supervision Quarantine
"Prepackaged goods - Metrological supervision management method"
3 Terms and Definitions
The following terms and definitions apply to this Standard.
4 Requirements
4.1 Performance indicators
Performance indicators of finished product shall comply with the provisions in Table 1.
4.2 Net content
Net content shall comply with the provisions of Decree 75, State Administration of Quality
Inspection and Supervision Quarantine.
5 Test Methods
5.1 Container
TAKE 4 samples, OBSERVE the container if there is gap, cracks, burrs and bubbles.
5.2 Color
TAKE 4 samples, visually INSPECT them.
5.3 Odor
TAKE 4 samples, TEST by sniffing.
5.6 Thermal stability
5.6.1 Main instrument
Incubator. Accuracy ± 1°C.
5.6.2 Test steps
TAKE 4 samples, horizontally PLACE them in (35±1)°C incubator, MAINTAIN for 24h,
TAKE out and RESTORE to room temperature, and OBSERVE if there is deformation or
discoloration phenomenon.
5.7 light stability
5.8 Product placement stability
TAKE 4 samples, in sequence PLACE each sample on 10º slope, OBSERVE if there is
topple-over phenomenon under any placement angle.
5.9 Burning performance
TAKE 4 samples, under conditions of room temperature 15°C - 25°C and without strong air
convection, OBSERVE the burning condition after lighting for 15min, and until completely
extinguished. MEASURE the flame height with still ruler, TAKE the maximum value of the 4
measurement results as final test result.
5.10 Burning time
TAKE 4 samples, under conditions of room temperature 15°C - 25°C and without strong air
convection, USE timer to measure the time from start-burning to the burning when it
reaches the 10mm or 20mm (refer to Note of 5.9 for the test) from the bottom.
5.11 Burning afterglow
TAKE 4 samples, under conditions of room temperature 15°C - 25°C and without strong air
convection, LIGHT for 30 min, EXTINGUISH the candles, MEASURE the time from
extinguishing of wax core to smokeless; LIGHT the candle again, REPEAT above steps.
TAKE the maximum value of the 2 measurement results as final test result.
5.14 Net content
TAKE 10 samples to weigh, COMPARE with the marked net content, it shall comply with
the provisions of Decree 75, State Administration of Quality Supervision and Inspection
Quarantine.
6 Inspection Rules
6.1 Inspection classification
Product inspection is divided into factory inspection and type inspection.
6.1.3 Batch and sampling
The products produced by same batch of material and the same batch of specifications are
deemed as same batch. Samples complying with inspection quantity shall be randomly
sampled from each batch of products. After inspected and qualified by the factory
inspection department, they may only be shipped out with product certification.
6.2 Judgment rules
If there is an item of the test results not meeting the requirements of this Standard, it may
sample double quantity of the same batch product to perform re-testing. For unqualified
item, the re-test result shall prevail. If there is still 1 item of the re-test results not meeting
the requirements of this Standard, it shall be judged as unqualified. [Translator. “ > 1
unqualified item” is not defined here].
7 Signs, Packaging, Transportation, Storage, and Shelf Life
7.1 Signs
Product sales packaging and transport packaging shall comply with GB/T 191.
7.1.1 There shall be the following signs on the sales package, it may be based on customer
requirements under special circumstances.
7.1.2 Transport packaging shall have the following signs, it may be based on customer
requirements under special circumstances.
7.2 Packaging
Under the condition of not damaging the product quality, product packaging and packaging
materials shall be defined by supplier and purchaser. Transport packaging carton shall be
firm. Each box shall be accompanied with certificate.
7.3 Transportation
AVOID severe vibration, shock, rain and sunlight during transportation. HANDLE with care
when loading / unloading.
7.4 Storage
Products shall be stored in less than 35°C, ventilated and dry warehouse. It is prohibited to
store near heat sources. It shall not be directly contacted with ground or wall when stacking.
Stacking height shall not exceed 2m.
7.5 Shelf life
The date shall be marked on the visual surface.
QB/T 2903-2007
ICS 71.100.35
Y44
QB
Industry Standard
of the People’s Republic of China
Jar Candle
ISSUE ON. DECEMBER 3, 2007
Implemented on. JUNE 1, 2008
Issued by. National Development and Reform Commission, the People’s Republic of
China
Table of Contents
Foreword... 3
1 Scope... 4
2 Normative References... 4
3 Terms and Definitions... 4
4 Requirements... 4
5 Test Methods... 5
6 Inspection Rules... 8
7 Signs, Packaging, Transportation, Storage, and Shelf Life... 9
Foreword
Jar Candle series product is one of the main products of the candle industry. In order to
ensure product quality, this industry standard is developed.
This Standard was drafted with reference to the German standard RAL-GZ 041/1 (2005)
(General Quality and Inspection Specifications for candles), and the American Material and
Testing Association standard ASTM F 2417-2004 (Standard Specification for Fire Safety for
Candles).
This Standard was proposed by China Light Industry Federation.
This Standard is under the jurisdiction of the National Toothpaste and Wax Product
Standardization Center.
Main drafting organizations of this Standard. Qingdao Jinwang Chemistry Co., Ltd.,
Zhongnan Candle Co., Ltd., Quan Wei Candle Co., Ltd., Dingzhou City Jinqiao Candles
Co., Ltd., and National Light Industry Toothpaste and Wax Product Quality Supervision and
Inspection Center.
Main drafters of this Standard. Jiang Ying, Gan Dongshen, and Wang Chuanlei.
This Standard is published in its first-time.
Jar Candle
1 Scope
This Standard specifies the jar candle’s terms and definitions, requirements, test methods,
inspection rules, signs, packaging, transportation, storage, and shelf life.
This Standard applies to jar candle products.
2 Normative References
The following documents contain provisions which, through reference in this Standard,
become provisions of this Standard. For dated reference, subsequent amendments
(excluding the correction) or revisions of these publications do not apply to this Standard.
However, parties who enter into agreement based on this Standard are encouraged to
investigate the possibility of applying the most recent editions of the standards indicated
below. For undated references, the latest edition of the reference document is applicable to
this Standard.
GB/T 191 Packaging - Pictorial marking
Decree 75, State Administration of Quality Inspection and Supervision Quarantine
"Prepackaged goods - Metrological supervision management method"
3 Terms and Definitions
The following terms and definitions apply to this Standard.
4 Requirements
4.1 Performance indicators
Performance indicators of finished product shall comply with the provisions in Table 1.
4.2 Net content
Net content shall comply with the provisions of Decree 75, State Administration of Quality
Inspection and Supervision Quarantine.
5 Test Methods
5.1 Container
TAKE 4 samples, OBSERVE the container if there is gap, cracks, burrs and bubbles.
5.2 Color
TAKE 4 samples, visually INSPECT them.
5.3 Odor
TAKE 4 samples, TEST by sniffing.
5.6 Thermal stability
5.6.1 Main instrument
Incubator. Accuracy ± 1°C.
5.6.2 Test steps
TAKE 4 samples, horizontally PLACE them in (35±1)°C incubator, MAINTAIN for 24h,
TAKE out and RESTORE to room temperature, and OBSERVE if there is deformation or
discoloration phenomenon.
5.7 light stability
5.8 Product placement stability
TAKE 4 samples, in sequence PLACE each sample on 10º slope, OBSERVE if there is
topple-over phenomenon under any placement angle.
5.9 Burning performance
TAKE 4 samples, under conditions of room temperature 15°C - 25°C and without strong air
convection, OBSERVE the burning condition after lighting for 15min, and until completely
extinguished. MEASURE the flame height with still ruler, TAKE the maximum value of the 4
measurement results as final test result.
5.10 Burning time
TAKE 4 samples, under conditions of room temperature 15°C - 25°C and without strong air
convection, USE timer to measure the time from start-burning to the burning when it
reaches the 10mm or 20mm (refer to Note of 5.9 for the test) from the bottom.
5.11 Burning afterglow
TAKE 4 samples, under conditions of room temperature 15°C - 25°C and without strong air
convection, LIGHT for 30 min, EXTINGUISH the candles, MEASURE the time from
extinguishing of wax core to smokeless; LIGHT the candle again, REPEAT above steps.
TAKE the maximum value of the 2 measurement results as final test result.
5.14 Net content
TAKE 10 samples to weigh, COMPARE with the marked net content, it shall comply with
the provisions of Decree 75, State Administration of Quality Supervision and Inspection
Quarantine.
6 Inspection Rules
6.1 Inspection classification
Product inspection is divided into factory inspection and type inspection.
6.1.3 Batch and sampling
The products produced by same batch of material and the same batch of specifications are
deemed as same batch. Samples complying with inspection quantity shall be randomly
sampled from each batch of products. After inspected and qualified by the factory
inspection department, they may only be shipped out with product certification.
6.2 Judgment rules
If there is an item of the test results not meeting the requirements of this Standard, it may
sample double quantity of the same batch product to perform re-testing. For unqualified
item, the re-test result shall prevail. If there is still 1 item of the re-test results not meeting
the requirements of this Standard, it shall be judged as unqualified. [Translator. “ > 1
unqualified item” is not defined here].
7 Signs, Packaging, Transportation, Storage, and Shelf Life
7.1 Signs
Product sales packaging and transport packaging shall comply with GB/T 191.
7.1.1 There shall be the following signs on the sales package, it may be based on customer
requirements under special circumstances.
7.1.2 Transport packaging shall have the following signs, it may be based on customer
requirements under special circumstances.
7.2 Packaging
Under the condition of not damaging the product quality, product packaging and packaging
materials shall be defined by supplier and purchaser. Transport packaging carton shall be
firm. Each box shall be accompanied with certificate.
7.3 Transportation
AVOID severe vibration, shock, rain and sunlight during transportation. HANDLE with care
when loading / unloading.
7.4 Storage
Products shall be stored in less than 35°C, ventilated and dry warehouse. It is prohibited to
store near heat sources. It shall not be directly contacted with ground or wall when stacking.
Stacking height shall not exceed 2m.
7.5 Shelf life
The date shall be marked on the visual surface.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of QB/T 2903-2007 be delivered?Answer: The full copy PDF of English version of QB/T 2903-2007 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of QB/T 2903-2007_English with my colleagues?Answer: Yes. The purchased PDF of QB/T 2903-2007_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- QB/T 2903-2007 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of QB/T 2903-2007?A step-by-step guide to download PDF of QB/T 2903-2007_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "QB/T 2903-2007".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|