QB/T 2155-2018_English: PDF (QB/T2155-2018)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| QB/T 2155-2018 | English | 135 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Travelling case and trolley bag
| Valid |
QB/T 2155-2018
|
| QB/T 2155-2010 | English | 95 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
[Replaced by QB/T 2155-2018. 2014XG included] Travelling case and trolley bag
| Obsolete |
QB/T 2155-2010
|
| QB/T 2155-2004 | English | 439 |
Add to Cart
|
4 days [Need to translate]
|
Travelling case and trolley bag
| Obsolete |
QB/T 2155-2004
|
| QB/T 2155-1995 | English | 239 |
Add to Cart
|
2 days [Need to translate]
|
(Travel soft case)
| Obsolete |
QB/T 2155-1995
|
| Standard ID | QB/T 2155-2018 (QB/T2155-2018) | | Description (Translated English) | Travelling case and trolley bag | | Sector / Industry | Light Industry Industry Standard (Recommended) | | Classification of Chinese Standard | Y48 | | Word Count Estimation | 12,157 | | Date of Issue | 2018-04-30 | | Date of Implementation | 2018-09-01 | | Older Standard (superseded by this standard) | QB/T 2155-2010 | | Regulation (derived from) | Ministry of Industry and Information Technology Announcement No. 23 of 2018 | | Summary | This standard specifies the product classification, requirements, test methods, inspection rules, marking, packaging, transportation and storage of suitcases (travel hard boxes, travel soft boxes), travel bags. | | Standard ID | QB/T 2155-2010 (QB/T2155-2010) | | Description (Translated English) | [Replaced by QB/T 2155-2018. 2014XG included] Travelling case and trolley bag | | Sector / Industry | Light Industry Industry Standard (Recommended) | | Classification of Chinese Standard | Y48 | | Classification of International Standard | 59.140.35 | | Word Count Estimation | 12,148 | | Date of Issue | 2010-12-29 | | Date of Implementation | 2011-04-01 | | Older Standard (superseded by this standard) | QB/T 2155-2004 | | Quoted Standard | GB/T 2912.1-1998; GB/T 3920-1997; GB/T 17592-2006; GB 19340-2003; GB 20400; GB 21550-2008; QB/T 1586.1; QB/T 1586.2; QB/T 1586.3; QB/T 2002.1; QB/T 2002.2; QB/T 2171-2001; QB/T 2172-2001; QB/T 2173-2001; QB/T 2537; QB/T 2918; QB/T 2919; QB/T 2920; QB/T 2921; QB/T 2922; QB/T 3826-1999; QB/T 1586.5; QB/T 4116; GB/T 19942 | | Drafting Organization | Apple Industrial Co., Ltd. of Guangdong | | Administrative Organization | China Leather Industry Standardization Technical Committee | | Regulation (derived from) | ?Industry-Science (2010) No.134 | | Summary | This standard specifies the suitcase (travel suitcase, travel soft box), bags of product classification requirements �p �p �p signs labeling, test methods �p inspection rules, packaging, transport and storage. This standard applies to all kinds of clothing have put in portable functionality with walking round, trolley suitcase, bags. | | Standard ID | QB/T 2155-2004 (QB/T2155-2004) | | Description (Translated English) | Travelling case and trolley bag | | Sector / Industry | Light Industry Industry Standard (Recommended) | | Classification of Chinese Standard | Y48 | | Classification of International Standard | 59.140.35 | | Word Count Estimation | 11,159 | | Date of Issue | 2004/8/15 | | Date of Implementation | 2005/1/1 | | Older Standard (superseded by this standard) | QB/T 2155-1995; QB/T 2156-1995 | | Quoted Standard | QB/T 1586.1; QB/T 1586.2; QB/T 1586.3; QB/T 2002.1; QB/T 2002.2; QB/T 2171-2001; QB/T 2172-2001; QB/T 2173-2001; QB/T 2537; QB/T 3826-1999; QB/T 3832-1999 | | Regulation (derived from) | Industry-Science (2010) No. 134 | | Summary | This standard specifies the suitcases, bags of product classification, requirements, test methods, inspection rules and signs, labels, packaging; This standard applies to all kinds of leather, construction materials, leather, synthetic leather, textiles for the fabric, plywood, plastic sheets, cardboard for inner tube, hot pressing or vacuum forming, injection molding, sewing craft production has put in a suitcase and carry functional clothing with a rod, bags go round; . |
QB/T 2155-2018
QB
LIGHT INDUSTRY STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 59.140.35
Classification No.. Y 48
Filing No.. 63690-2018
Replacing QB/T 2155-2010
Travelling case and trolley bag
旅行箱包
ISSUED ON. MAY 08, 2018
IMPLEMENTED ON. SEPTEMBER 01, 2018
Issued by. Ministry of Industry and Information Technology of the
People's Republic of China
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative references ... 5
3 Product classification ... 6
4 Requirements ... 7
5 Test methods ... 12
6 Inspection rules ... 16
7 Marks, packaging, transport and storage ... 17
Annex A (normative) Special type inspection ... 19
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard is a revision of QB/T 2155-2010 “Travelling case and Trolley bag”.
Compared with QB/T 2155-2010, in addition to the editorial modifications, the
main technical changes are as follows.
- modified and added references in “Normative references”;
- modified and added the content of “Product classification”;
- added the content of “Raw materials and accessories”;
- deleted the requirements for “superior products”;
- refined “case (bag) specified load”;
- modified the requirements and test methods for "walking performance"
"oscillation impact" "stitching strength" "performance of fabric rubbing
color fastness";
- modified “impact resistance” to “drop performance”, and modified the test
methods for “drop performance”;
- modified "hardness of the top layer of the aluminum mouth of the case" to
the "hardness of the aluminum mouth of the case" and refined the test
methods of "hardness of the aluminum mouth of the case";
- modified "case (bag) lock" to "case (bag) lock durability performance";
- modified the test methods for "corrosion resistance of hardware
accessories";
- modified "hard case rolling impact performance of superior product" to
"roller impact performance" and modified the test methods for "roller
impact performance";
- deleted the requirements and test methods for "zipper flat pull";
- added the measurement method of “volume”;
- modified the specifications of “marks”, modified the content of “marks” from
Clause 4 to Clause 7.
This Standard was proposed by China Light Industry Federation.
Travelling case and trolley bag
1 Scope
This Standard specifies the product classification, requirements, test method,
inspection rules, marks, packaging, transport and storage for travelling case
(hard case, soft case) and trolley bag.
This Standard is applicable to travelling case and trolley bag with carrying
clothes, with walking wheels and pull rods.
2 Normative references
The following referenced documents are indispensable for the application of
this document. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any
amendments) applies.
GB/T 231.1, Metallic materials - Brinell hardness test - Part 1. Test method
GB/T 2912.1, Textiles - Determination of formaldehyde - Part 1. Free and
hydrolyzed formaldehyde(water extraction method)
GB/T 3920, Textiles - Tests for color fastness - Color fastness to rubbing
GB/T 17592, Textiles - Determination of the banned azo colorants
GB 19340, Adhesives for footwear and case and bag
GB/T 19941, Leather and fur - Chemical tests - Determination of
formaldehyde content
GB/T 19942, Leather and fur - Chemical tests - Determination of banned azo
colorants
GB 20400, Leather and fur - Limit of harmful matter
GB 21550, The restriction of hazardous materials in polyvinyl chloride
artificial leather
GB/T 22889, Leather - Physical and mechanical tests - Determination of top
layer coating thickness
QB/T 1586.1, Hardware fitting of case and bag - Case - lock
QB/T 1586.2, Hardware fitting of case and bag - Case travelling wheel
QB/T 1586.3, Hardware fitting of case and bag - Case - handle
QB/T 1586.5, Hardware fitting of case and bag - Draw rod
QB/T 2002.1, Technical Conditions of Electroplated Layer of Leather
Hardware Fittings
QB/T 2002.2, Technical Conditions of Top layer Spray Painting of Leather
Hardware Fittings
QB/T 2171, Metal Zippers
QB/T 2172, Plastic Injection Zippers
QB/T 2173, Nylon Zipper
QB/T 2537, Leather - Tests for color fastness - Color fastness to cycles of to-
and-fro rubbing
QB/T 2918, Case and bag - Test method for impact resistance by means of
falling weight
QB/T 2919, Case and bag - Test method for resistance to fatigue of pull rod
QB/T 2920, Case and bag - Test method for traveling
QB/T 2921, Case and bag - Test method for fall down
QB/T 2922, Case and bag - Test method for fall down
QB/T 3826, Corrosion-resistant testing method of the metal deposits and
conversion coatings for the light industrial products - Neutral salt spraying
test (NSS)
QB/T 4116, Case and bag - Test method for rotary drum
QB/T 5083-2017, Case and bag - Determination of capacity rate
3 Product classification
3.1 Classification according to variety.
- travelling hard case;
- travelling soft case;
- trolley bag.
4.2.3 Walking wheels
In accordance with QB/T 1586.2.
4.2.4 Carrying handle
In accordance with QB/T 1586.3.
4.2.5 Pull rod
In accordance with QB/T 1586.5.
4.2.6 Hardware accessories
In accordance with QB/T 2002.1, QB/T 2002.2.
4.2.7 Zipper
In accordance with QB/T 2171, QB/T 2172, QB/T 2173.
4.3 Appearance quality
4.3.1 Case body (bag body)
The body is straight and the teeth are straight; the erect is stable, there is no
unevenness, or skewness.
4.3.2 Case top layer (bag top layer)
4.3.2.1 Soft case, trolley bag
The color of the top layer material is commensurate, the stitching area has no
obvious wrinkles, bow wrinkles, and the whole is neat and smudge-free. Leather,
recycled leather top layer material has no obvious disability, no cracking surface,
cracking. Artificial leather/synthetic leather top layer material has no obvious
embossing, marking. The main parts of the fabric top layer are free of warp,
weft breaking, yarn jumping, splitting and other defects. Minor parts can also
have a slight 2 defects.
4.3.2.2 Hard case
The case surface has no defects such as unevenness, cracks, deformation,
burns, scratches, etc. The overall is neat, no stains.
4.3.3 Case mouth
In close cooperation. The gap between the bottom of the mouthpiece and the
cover is not more than 2mm, and the gap of the joint box is not more than 3mm.
The case mouth and the case are assembled tightly, regularly. There shall be
According to the load specified in Table 5, the load is evenly placed in the case
(bag). Test the carrying handle, pull rod and strap in the order of QB/T 2922.
The numbers of oscillation impact are as follows.
- carrying handle. 400 times for soft case carrying handle, 300 for hard case
carrying handle, 300 for side carrying handle, 250 for trolley bag carrying
handle;
- pull rod. when specification of travelling case is ≤610 mm, 500 times for pull
rod; when specification of travelling case is >610 mm, 300 times for pull
rod, 300 for trolley bag pull rod; when testing pull rod, use the suction cup
(not releasing), move up and down at a constant speed;
- strap. 250 times for single strap, 400 times for double straps; when testing
strap, it shall adjust the strap to the maximum length.
5.5.5 Drop performance
Testing according to QB/T 2921. Adjust the height of the release table to 900mm
from the impact plane at the bottom of the sample.
- travelling case. drop the plane equipped with carrying handle, side carrying
handle once, respectively;
- trolley bag. drop the plane equipped with pull rod, walking wheel once,
respectively (once horizontally and vertically, respectively).
5.5.6 Static pressure resistance of hard case body
Lay the empty hard case flat, 20 mm from case surface testing area to each
side of case surface. Uniformly apply the load to the specified load (making the
entire box evenly stressed). The hard case with specification of 535mm ~
660mm carries a load of (40.0±0.5) kg. The hard case with specification of
685mm ~ 835mm carries a load of (60.0±0.5) kg. Perform continuous
compression for 4 h.
5.5.7 Dropping ball impact resistance of plastic hard case surface
Carry out the inspection according to QB/T 2918. Use (4000±10) g of metal
hammer.
5.5.8 Roller impact performance
Carry out the inspection according to QB/T 4116. Metal drum shall not be fitted
with a cone. Place the sample at room temperature for more than 1 h and place
it directly into the drum for 20 turns (not for metal hard case).
5.5.9 Durability of case and bag locks
batch of products shall be qualified. If one (or more) fails, double the sample for
re-inspection. If all the re-inspections are qualified, the batch of products shall
be qualified.
7 Marks, packaging, transport and storage
7.1 Marks
7.1.1 Products that pass the inspection shall have the following marks.
- name (manufacturer or distributer), address, contact number;
- if necessary, the product shall be attached (maintenance) instructions;
- when necessary, the product packaging shall include the product name,
item number, quantity, storage and transport (protection) logo, etc.
7.1.2 Product label shall meet the following requirements.
- shall label with. product name, product standard number, trademark, article
number (model), body material, qualified (inspection) logo;
- when a certain type of surface material used in a single product exceeds
20% of the total area of the surface material used in the product, it shall
be noted;
- when more than 90% of the top layer material is used in the top layer leather
(except the head layer transfer film leather), it is allowed to be marked as
"leather";
- if the main surface layer material is made of split leather, it shall be marked
with the layered "typeface";
- when the coating thickness or film thickness of the leather substrate is
greater than the thickness of the leather substrate, it is not appropriate to
label “leather” separately, which can be labeled as “composite material”;
- imported products shall be marked with origin.
7.2 Packaging
The inner and outer packaging of the product shall be made of suitable
packaging materials to prevent damage during transport and storage.
7.3 Transport and storage
In accordance with the followings.
......
QB/T 2155-2010
QB
LIGHT INDUSTRY STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 59.140.35
Classified No.. Y48
File No.. 31057-2011
Replacing QB/T 2155-2004
Travelling case and trolley bag
旅行箱包
ISSUED ON. DECEMBER 29, 2010
IMPLEMENTED ON. APRIL 1, 2011
Issued by. Ministry of Industry and Information Technology of the
People's Republic of China
Table of Contents
Foreword ... 3
1 Scope .. 5
2 Normative references ... 5
3 Product classification .. 6
4 Requirements ... 7
5 Test methods ... 13
6 Inspection rules .. 16
7 Marks, label, packaging, transport, storage ... 17
Annex A (normative) Special type inspection ... 19
Amendment No.1 of QB/T 2155-2010 "Travelling case and trolley bag" .. 20
Foreword
This Standard is a revision to QB/T 2155-2004 Travelling case and trolley bag.
Compared with QB/T 2155-2004, the main changes are as follows.
- simplified “Scope”;
- added standards in “Normative references”;
- modified “Classified according to materials” and added corresponding
requirements;
- added the requirements for “Hazardous substances limit”, “pull rod”,
"marks";
- added the "specified load" of travelling bag;
- modified "load performance" test method to " oscillation impact test ";
- modified the requirements for external load in "walking test";
- modified "impact resistance performance" test method;
- added the requirements for top grade product in "falling ball impact
resistance of hard case surface";
- modified the requirements for "corrosion resistance of metal accessory
plating", "rubbing fastness of travelling bag", "case lock";
- added "special type inspection";
- modified "qualification determination";
- added "transport and storage".
This Standard was proposed by China Light Industry Federation.
This Standard shall be under the jurisdiction of National Technical Committee
on Leather Industry of Standardization Administration of China (SAC/TC 252).
The drafting organizations of this Standard. Guangdong Apple Industrial Co.,
Ltd., Zhejiang Amalodie Travelling Products Co., Ltd., Guangzhou Hi-Pack Co.,
Ltd., Guangdong Shenglilai Leather Co., Ltd., Guangzhou Shark Leather Co.,
Ltd.
Main drafters of this Standard. Wang Chengliang, Sun Zhongming, Yu Xinglong,
Zou Lisheng, Zou Limeng, Mo Feiying, Zhong Xihao.
Travelling case and Trolley bag
1 Scope
This Standard specifies the product classification, requirements, test methods,
inspection rules and marks, labels, packaging, transport, storage of travelling
case (travelling suitcase, travelling soft case), trolley bag.
This Standard is applicable to various travelling cases, trolley bags with a
function for carrying clothes, equipped with travelling wheels, pull rod.
2 Normative references
The following referenced documents are indispensable for the application of
this document. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any
amendments) applies.
GB/T 2912.1-1998, Textiles - Determination of formaldehyde - Part 1. Free
and hydrolyzed formaldehyde (Water extraction method)
GB/T 3920-1997, Textiles - Tests for color fastness - Color fastness to
rubbing
GB/T 17592-2006, Textiles - Determination of the banned azo colorants
GB 19340-2003, Adhesives for footwear and base and bag
GB/T 19942, Leather and fur - Chemical tests - Determination of banned azo
colorants (GB/T 19942-2005, ISO/TS 17234.2003, MOD)
GB 20400, Leather and fur - Limit of harmful matter
GB 21550-2008, The restriction of hazardous materials in polyvinyl chloride
artificial leather
QB/T 1586.1, Hardware fitting of case and bag - Case-lock
QB/T 1586.2, Hardware fitting of case and bag - Case travelling wheel
QB/T 1586.3, Hardware fitting of case and bag - Case-handle
QB/T 2002.1, Technical Conditions of Electroplated Layer of Leather
Hardware Fittings
QB/T 2002.2, Technical Conditions of Surface Spray Painting of Leather
Hardware Fittings
QB/T 2171-2001, Metal Zippers
QB/T 2172-2001, Plastic Injection Zippers
QB/T 2173-2001, Nylon Zippers
QB/T 2537, Leather - Tests for color fastness - Color fastness to cycles of to-
and-fro rubbing
QB/T 2918, Case and bag - Test method for impact resistance by means of
falling weight
QB/T 2919, Case and bag - Test method for resistance to fatigue of pull rod
QB/T 2920, Case and bag - Test method for traveling
QB/T 2921, Case and bag - Test method for fall down
QB/T 2922, Case and bag - Test method for fall down
QB/T 3826-1999, Corrosion-resistant testing method of the metal deposits
and conversion coatings for the light industrial products - Neutral salt
spraying test (NSS)
QB/T 1586.5, Hardware fitting of case and bag-Draw rod
QB/T 4116, Case and bag - Test method for rotary drum
3 Product classification
3.1 Classified according to variety
a) travelling suitcase (hard case);
b) travelling soft case (soft case);
c) travelling bag.
3.2 Classified according to materials
a) travelling case, trolley bag that take leather as fabric;
b) travelling case, trolley bag that take man-made leather, synthetic leather
as fabric;
c) travelling case, trolley bag that take recycled leather as fabric;
4.5.2 Fatigue resistance of pull rod
Perform inspection according to QB/T 2919. Conduct pulling-closing 4000 times
for top grade product. The pull rod shall have no deformation, jamming, loosing.
4.5.3 Walking performance
Carry out the walking test under specified load conditions. Qualified product
walks 8 km continuously. Top grade product continuously walks 12 km. After the
test, the travelling wheels shall move flexibly, no blocking or deformation. Wheel
carrier, axle have no deformation, cracking. The abrasion of travelling wheel
does not exceed 2 mm. The pulling-closing of pull rod is smooth, no deformation,
loosening or blocking. The junction of pull rod and case body shall have no
cracks, loosening. The case (bag) lock works as normal.
When double-rod travelling case is in test, it shall totally pull out the rod. Apply
load to the flexible part between pull rod and case body, 5kg for qualified
product, 8 kg for top grade product.
4.5.4 Oscillation impact performance
Carry out the oscillation impact test under the specified load conditions (the
loads of side pull strap, side drag handle are 50% of the specified load).
Respectively inspect back strap, carrying handle, side handle, pull rod, side
drag handle, side pull strap. The times of oscillation impact are. 400 times for
carrying handle, side drag handle, respectively; 300 times for pull rod (400 times
for top grade product); 250 times for back strap, side pull strap, side drag handle,
respectively. After the test, each component has no deformation, crack, fracture,
open line. The fasteners, connectors do not loose. The case body (bag body)
has no deformation, crack. The pulling-closing of pull rod is smooth, no
deformation, loosening, blocking or dislocation. The junction between pull rod
and case body has no crack, loosening. The case (bag) lock works as normal.
4.5.5 Impact resistance performance
Carry out the falling test under specified load conditions. Case body, case
mouth, lining frame do not deform or crack. Travelling wheels, axle and stand
are not deformed, cracked. The gap of case bottom facing mouth, covering
mouth seam gap do not exceed 2 mm. The seam gap of covering mouth is not
greater than 3 mm. The travelling wheels work flexibly, without loosening. The
fastener, connector, lock do not deform, no loosening or damage. Case (bag)
lock works flexibly. Case (bag) surface has no cracks.
4.5.6 Static resistance of hard case body
The hard case surface shall withstand static load continuously within 4h
according to the specified load. Case body and case mouth do not deform or
Inspect according to QB/T 2918.
5.5.7 Rolling impact performance of top grade hard case
Inspect according to QB/T 4116. The processing temperature before test is -
10°C.
5.5.8 Horizontal pull strength of zipper
Testing device and fixtures shall comply with the provisions of 5.5.1 in QB/T
2171-2001, QB/T 2172-2001, QB/T 2173-2001. Take a section of zipper more
than 100 mm on the testing sample. Clamp it on a fixture with a width of 25 mm.
When clamping, align the zipper teeth feet and fixture folder mouth part closely.
Turn the tension machine on. At a tension speed of (300±10) mm/min, test it till
teeth are off or yarn is broken. The maximum value displayed by tension
machine shall be the horizontal pull strength value.
5.5.9 Stitch strength
Extract a small sample with length not greater than 100 mm, each side width
greater than 30 mm at any part of main stitch surface of soft case, travelling
bag. The width of upper fixture, lower fixture is 50 mm. When...
......
|