| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| LY/T 1654-2006 | English | 559 |
Add to Cart
|
3 days [Need to translate]
|
Reconstituted decorative veneer
| Obsolete |
LY/T 1654-2006
|
PDF similar to LY/T 1654-2006
Basic data | Standard ID | LY/T 1654-2006 (LY/T1654-2006) | | Description (Translated English) | Reconstituted decorative veneer | | Sector / Industry | Forestry Industry Standard (Recommended) | | Classification of Chinese Standard | B70 | | Classification of International Standard | 79.060 | | Word Count Estimation | 14,189 | | Date of Issue | 2006-08-31 | | Date of Implementation | 2006-12-01 | | Quoted Standard | GB/T 2828.1-2003; GB/T 17657-1999; GB 18580-2001; GB/T 19367.1-2003; LY/T 1655-2006 | | Regulation (derived from) | ?State Forestry Administration Announcement 2010 No.1 | | Issuing agency(ies) | State Forestry Administration | | Summary | This standard specifies the reorganization of decorative veneer of terms and definitions, classification, requirements, test methods, inspection rules, packaging, marking, transportation and storage. This standard applies to reorganization decorative material after slicing, peeling or cutting processing of decorative veneer. This standard does not apply to integrated board. | LY/T 1654-2006: Reconstituted decorative veneer---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Reconstituted decorative veneer
ICS 79.060
B70
People's Republic of China Forestry Industry Standard
Reorganized decorative veneer
Released on.2006-08-31
Implementation of.2006-12-01
State Forestry Administration released
Foreword
Appendix A of this standard is an informative annex.
This standard is proposed and managed by the National Standardization Technical Committee for Wood-based Panels.
This standard is drafted by. Nanjing Forestry University.
Participated in the drafting of this standard. Weide Wood (Suzhou) Co., Ltd., Dehua Building Materials (Suzhou) Co., Ltd., Chinese Academy of Forestry
Institute of Wood Industry, School of Materials Engineering, Fujian Agriculture and Forestry University.
The main drafters of this standard. Zhang Qinli, Zeng Zhigao, Zhuang Qicheng, Wang Jinlin, Huang Yongnan, Hou Lun Deng, Yi Yuhua, Li Chunsheng.
This standard was first published.
This standard is interpreted by the National Standardization Technical Committee for Wood-based Panels.
Reorganized decorative veneer
1 Scope
This standard specifies the terms and definitions, classification, requirements, test methods, inspection rules, and packaging, marking, transportation, and
Storage, etc.
This standard is applicable to decorative veneers made by reshaping, cutting or sawing.
This standard does not apply to integrated boards.
2 Normative references
The terms in the following documents are incorporated by this standard into the terms of this standard. All dated references, all subsequent
Modifications (not including errata content) or revisions do not apply to this standard, however, research that encourages agreements based on this standard is
No, the latest version of these files can be used. For undated references, the latest edition applies to this standard.
GB/T 2828.1-2003 - Sampling procedures for sampling by sampling - Part 1 . Batch-to-batch inspections by Retrieving Quality of Acceptance (AQL)
Plan (ISO 2859-1.1999, IDT)
GB/T 17657-1999 Test method for physical and chemical properties of wood-based panels and veneered panels
GB 18580-2001 Indoor decoration materials, artificial release boards and their products, formaldehyde release limit
GB/T 19367.1-2003 Determination of thickness, width and length of panel
LY/T 1655-2006 Reconstructed decorative materials
3 Terms and definitions
The terms and definitions established by LY/T 1655-2006 and the following terms apply to this standard.
3.1
A decorative veneer made by reshaping, cutting, or sawing.
3.2
The patterns are arranged in approximately parallel lines, similar to the reworked decorative veneers of the wood-cut pattern.
3.3
The pattern is in a "V" shape or a "landscape" pattern, similar to a composite decorative veneer with a wood string cut pattern.
3.4
In addition to the cut and string-cut pattern reconstituted decorative veneers, it is similar to the various decorative patterns of various decorative patterns on the wood surface.
3.5
Reorganized decorative veneer with artistic pattern.
3.6
The small veneer on the surface of the reconstituted decorative veneer falls off to expose the adhesive layer.
3.7
Partial surface discoloration of the reconstituted decorative veneer caused during processing.
|