|
US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
LY/T 1622-2004: Trailed tree deep planting earth auger
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| LY/T 1622-2004 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Trailed tree deep planting earth auger
| |
LY/T 1622-2004
|
PDF similar to LY/T 1622-2004
Basic data | Standard ID | LY/T 1622-2004 (LY/T1622-2004) | | Description (Translated English) | Trailed tree deep planting earth auger | | Sector / Industry | Forestry Industry Standard (Recommended) | | Classification of Chinese Standard | B95 | | Classification of International Standard | 65.060.80 | | Word Count Estimation | 8,876 | | Date of Issue | 2004-11-03 | | Date of Implementation | 2004-12-01 | | Summary | This standard specifies the traction Drills DEEP PLANTING terminology, provides traction Drills DEEP PLANTING conditions of use, technical requirements, test methods, inspection rules, marking, manual, packaging, transportation and storage. This standard applies to traction DEEP PLANTING drilling machine. | LY/T 1622-2004: Trailed tree deep planting earth auger---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Trailed tree deep planting earth auger
ICS 65.060.80
B95
People's Republic of China Forestry Industry Standard
Trailed deep-planting afforestation drilling machine
Released on November 11,.2004
Implementation of.2004-12-01
State Forestry Administration released
Foreword
This standard is proposed and managed by the National Forestry Machinery Standardization Technical Committee.
This standard is drafted by. Beijing Forestry University.
The main drafters of this standard. Yu Guosheng, Xu Jing, Wu Guangtao.
This standard was first developed.
Trailed deep-planting afforestation drilling machine
1 Scope
This standard gives the terminology of the traction type deep-planting afforestation drilling machine, which stipulates the use conditions and technical requirements of the traction deep-planting afforestation drilling machine.
Requirements, test methods, inspection rules, signs, instructions for use, packaging, transportation and storage.
This standard applies to the traction deep-planting afforestation drilling machine.
2 Normative references
The terms in the following documents become the terms of this standard by reference to this standard. All dated references, followed by all
Modifications (not including errata content) or revisions do not apply to this standard, however, parties to agreements based on this standard are encouraged to study
Is it possible to use the latest version of these files? For undated references, the latest edition applies to this standard.
GB/T 191 packaging storage and transportation icon
3 Terms and definitions
The following terms and definitions apply to this standard.
3.1
A machine that is towed by a tractor or other power machine for deep drilling afforestation operations.
3.2
The vertical distance from the bottom of the hole to the ground surface after completing a drilling operation.
3.3
The interval between the start of two adjacent drill holes during continuous drilling operations.
4 Technical requirements
4.1 Machine performance requirements
4.1.1 After connecting with the power machine, when operating the operating device, the drill bit of the deep-planting afforestation drilling machine can be operated as required to achieve feed and return.
mobile.
4.1.2 Dry running test requirements. The drill drive unit is stably operated for 3 minutes without the drill bit being installed, and the feed mechanism is operated up and down 3 times.
There should be no abnormal noise, the fasteners should not be loose, and the rotational speed of the drill shaft should not exceed ± 5%.
4.1.3 Full-load drilling operation in afforestation sites meeting the conditions of 5.1, after completing at least 5 drilling holes, the machine should not have abnormal noise, tight
The firmware should not be loose, and the connection of each part should be reliable and there should be no falling off.
4.1.4 After the air operation and full load operation test, the hydraulic system shall not have oil leakage or oil leakage.
4.1.5 The drilling depth error should be no more than 50mm.
4.1.6 Under normal working conditions, the main machine and non-vulnerable are required to be drilled at a depth of at least 1500 holes.
The piece is trouble free.
4.1.7 Reliability requirements. 15000 holes are accumulated according to the drilling depth that the drilling machine should reach. Except for the consumable parts can be replaced, the host should not have
malfunction.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of LY/T 1622-2004_English be delivered?Answer: Upon your order, we will start to translate LY/T 1622-2004_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of LY/T 1622-2004_English with my colleagues?Answer: Yes. The purchased PDF of LY/T 1622-2004_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|