|
US$319.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
LY/T 1608-2013: Garden machinery. Petrol engine powered hand-pushed lawn
Status: Valid LY/T 1608: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| LY/T 1608-2013 | English | 319 |
Add to Cart
|
3 days [Need to translate]
|
Garden machinery. Petrol engine powered hand-pushed lawn
| Valid |
LY/T 1608-2013
|
| LY/T 1608-2003 | English | 359 |
Add to Cart
|
3 days [Need to translate]
|
Hand-pushed lawn comber
| Obsolete |
LY/T 1608-2003
|
PDF similar to LY/T 1608-2013
Basic data | Standard ID | LY/T 1608-2013 (LY/T1608-2013) | | Description (Translated English) | Garden machinery. Petrol engine powered hand-pushed lawn | | Sector / Industry | Forestry Industry Standard (Recommended) | | Classification of Chinese Standard | B91 | | Classification of International Standard | 65.060.70 | | Word Count Estimation | 12,151 | | Older Standard (superseded by this standard) | LY/T 1608-2003 | | Quoted Standard | GB/T 191; GB/T 9480; GB/T 13264; GB/T 21398; GB 26133; GB 26509-2011; LY/T 1621; JB/T 5135.1; JB/T 5135.3; EN 13684-2004 + AMD 3 -2009 | | Regulation (derived from) | State Forestry Bulletin 2013 No. 8; industry standard filing Notice No. 5 of 2013 (No. 161 overall) | | Issuing agency(ies) | State Forestry Administration | | Summary | This standard specifies: a gasoline -powered hand push lawn comb grass machine (hereinafter referred to comb grass machine) Terminology and definitions, model preparation method, the basic parameters, technical requirements, test methods, inspection rules | LY/T 1608-2013: Garden machinery. Petrol engine powered hand-pushed lawn---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Garden machinery.Petrol engine powered hand-pushed lawn
ICS 65.060.70
B91
People's Republic of China forestry industry standards
Replace LY/T 1608-2003
Garden machinery to gasoline engine powered
Hand pushing lawn combing machine
2013-03-15 released
2013-07-01 Implementation
State Forestry Administration released
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces LY/T 1608-2003 "hand-push lawn grass machine," compared with LY/T 1608-2003, the main technical changes
as follows.
a) Change the standard name from "hand pushing lawn combing machine" to "garden machinery gasoline powered hand pushing lawn combing machine"
The English name should be changed from "Hand-pushedlawncomber" to "Garden machinery-Petrolengine."
poweredhand-pushedlawncomber ";
b) Changes to the contents of normative references (see Chapter 2,.2003 Edition, Chapter 2);
c) deleted the contents of 3.2, 3.3, 3.4 in Chapter 3 (2003 edition 3.2, 3.3, 3.4);
d) Add the terms and definitions of "working organization, belt limit device" (see 3.3, 3.5);
e) Amend the definition of "hand-held lawn grooming and lifting mechanism" (see 3.1, 3.2,.2003 edition 3.1, 3.5);
f) The content of the model compilation method has been added (see Chapter 4);
g) Added the basic parameters (see Chapter 5);
h) Increased requirements for use of the environment (see 6.1.1);
i) Increased requirements for complete gasoline engines (see 6.2);
j) Revised requirements for starting performance (see 6.3.1,.2003 edition 4.2.1);
k) Revised requirements for idle speed performance (see 6.3.2,.2003 Edition 4.2.2);
l) modified the requirements for air-handling performance (see 6.3.3,.2003 Edition 4.2.3);
m) Modify the performance requirements for the main components (see 6.4,.2003 Edition 4.3);
n) Changed the contents of the protection of hazardous areas (see 6.5.1,.2003 edition 4.5.1);
o) Modify the operator noise requirements (see 6.5.5,.2003 edition 4.5.3);
p) increase the safety distance requirements (see 6.5.3);
q) Increased parabolic hazard requirements (see 6.5.4);
r) Increase the vibration of hands, exhaust emissions, electromagnetic compatibility requirements (see 6.5.6,6.5.7,6.5.8);
s) modified the reliability requirements (see 6.6,.2003 edition 4.2.7);
t) Increased assembly quality requirements (see 6.7);
u) Changes in appearance quality requirements (see 6.8,.2003 Edition 4.4);
v) Add and modify corresponding test methods (see Chapter 7, Chapter 5 of.2003);
w) revised the inspection rules and divided the product inspection into factory inspection, type inspection and third party inspection (see Chapter 8,.2003 Edition
Chapter 6);
x) Changes to the instructions for use (see 9.2,.2003 version 7.3);
y) Increases the requirement for oil drain (see 9.4.3).
This standard by the National Forestry Machinery Standardization Technical Committee (SAC/TC61) and centralized.
This standard is drafted by. Green Friends of the Machinery Group Co., Ltd..
Participated in the drafting of this standard. State Forestry Administration of Harbin Forestry Machinery Institute.
The main drafters of this standard. Zhu Zhixia, Zhao Xueming, Yang Xuefeng.
This standard was first released in August.2003, this is the first revision.
Garden machinery to gasoline engine powered
Hand pushing lawn combing machine
1 Scope
This standard specifies the petrol powered hand-push lawn combing machine (hereinafter referred to as combing machine) terms and definitions, model compilers
Law, basic parameters, technical requirements, test methods, inspection rules, marking, instruction manual, packaging, transportation and storage.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB/T 9480 agriculture and forestry tractors and machinery, lawn and garden power machinery manual preparation rules
GB/T 13264 small batches of nonconforming sample count sampling procedures and sampling tables
GB/T 21398 Agricultural machinery - Electromagnetic compatibility test methods and acceptance rules
GB 26133 Non-road mobile small exhaust ignition engine exhaust pollutant emission limits and measurement methods (China's first and second
stage)
GB 26509-2011 garden machinery Steam (diesel) oil-powered stepping lawn mower safety requirements and test
method
LY/T 1621 garden machinery model preparation methods
JB/T 5135.1 General small gasoline engine bench performance test methods
JB/T 5135.3 General small gasoline engine technical conditions
EN13684..2004 A3..2009 Ventilators and ripper for pedestrian handling of gardening equipment (Garden
equipment-Pedestriancontroledlawnaeratorsandscarifiers-Safety)
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Hand-pushed lawn mower hand-pushedlawncomber
A hand operated by the operator, the working device by a certain regularity, the blade fixed to the shaft with the axis perpendicular to
The ground rotates at high speed to the point where the leaves of the lawn are torn and thrown into straw bags or onto the surface of the lawn.
3.2
Lifting mechanism heightmechanism
A mechanism used to change the relative ground position of a work mechanism.
3.3
Workingmechanism
Used to complete the grooming, raking grass or cutting root function of the body.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of LY/T 1608-2013_English be delivered?Answer: Upon your order, we will start to translate LY/T 1608-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of LY/T 1608-2013_English with my colleagues?Answer: Yes. The purchased PDF of LY/T 1608-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version LY/T 1608-2013?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version LY/T 1608-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|