LY/T 1602: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| LY/T 1602-2016 | English | 399 |
Add to Cart
|
3 days [Need to translate]
|
Spindle-less veneer lathe
| Obsolete |
LY/T 1602-2016
|
| LY/T 1602-2002 | English | 319 |
Add to Cart
|
3 days [Need to translate]
|
General specifications for spindleless veneer lathe
| Obsolete |
LY/T 1602-2002
|
PDF similar to LY/T 1602-2016
Basic data | Standard ID | LY/T 1602-2016 (LY/T1602-2016) | | Description (Translated English) | Spindle-less veneer lathe | | Sector / Industry | Forestry Industry Standard (Recommended) | | Classification of Chinese Standard | B97 | | Word Count Estimation | 10,154 | | Date of Issue | 2016-07-27 | | Date of Implementation | 2016-12-01 | | Older Standard (superseded by this standard) | LY/T 1602-2002 | | Regulation (derived from) | State Forestry Administration Announcement No.17 of 2016; Industry Standard Announcement No.16 of 2016 (No.204) | | Issuing agency(ies) | State Forestry Administration | LY/T 1602-2016: Spindle-less veneer lathe---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(No card shaft peeling machine)
ICS 79.120.99
B97
People's Republic of China Forestry Industry Standard
Replacing LY/T 1602-2002
Cardless shaft rotary cutting machine
Released on.2016-07-27
Implementation of.2016-12-01
State Forestry Administration released
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
Please note that some of the contents of this document may involve patents. Publication of this document
The organization is not responsible for identifying these patents.
This standard is a revision of LY/T 1602-2002 "General Technical Conditions for Cardless Rotary Cutting Machine". This standard and LY/T 1602-
Compared with.2002, the main technical changes are as follows.
--- Modified the scope;
---Modified normative references;
--- Divide the original standard Chapter 4 into two parts. the simplified diagram is Chapter 4, and the simple icon note has been modified to suit other content modifications.
The main parameter is Chapter 5;
--- Combine Chapters 5 and 6 of the original standard into the requirements of Chapter 6, and divide it into five parts. 6.1 General requirements; 6.2 Main
Parts; 6.3 assembly requirements; 6.4 accuracy test; 6.5 dry run test; 6.6 load test;
Revise and increase;
--- Revised part of the geometric accuracy test items and the accuracy index, dry run test, load test part of the requirements of Chapter 6;
The inspection diagram and inspection method have been revised again;
--- Revised the Chapter 7 inspection rules;
--- Revised the relevant provisions of Chapter 8, marking, packaging, transportation and storage.
This standard is proposed by the National Wood-based Panel Machinery Standardization Technical Committee (SAC/TC66) and is under the jurisdiction.
This standard was drafted. Shandong Baishengyuan Group Co., Ltd., Weihai Ruike CNC Technology Service Co., Ltd.
The main drafters of this standard. Song Xiucai, Wang Chengrui, Song Ruiting, Sun Yigang.
The previous versions of the standards replaced by this standard are.
---LY/T 1602-2002.
Cardless shaft rotary cutting machine
1 Scope
This standard specifies the main parameters, requirements, inspection rules and signs, packaging and storage of the cardless shaft rotary cutting machine.
This standard applies to the frictionless roller drive without card shaft rotary cutting machine (hereinafter referred to as rotary cutting machine).
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 191 packaging storage and transportation icon
General rules and safety requirements for GB/T 3766 hydraulic drive systems and their components
GB 5226.1 Mechanical electrical safety machinery and electrical equipment - Part 1. General technical conditions
GB/T 13306 signage
General technical conditions for GB/T 13384 mechanical and electrical product packaging
GB/T 15785 Rotary cutter blade general technical conditions
General technical conditions for GB/T 18262 wood-based panel machinery
GB/T 18514 wood-based panel machinery safety rules
GB/T 18515 Rotary cutting machine structure safety
JB/T 9953 Woodworking Machine Noise Acoustic (Pressure) Level Measurement Method
LY/T 1454 Wood-based panel mechanical precision inspection rules
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Knife door clearance horizontalgap
The vertical distance between the bus bar of the pressure ruler and the front face of the rotary cutter is the door clearance S0, as shown in Fig. 1.
Figure 1 Schematic diagram of the door gap
|