JJF 1015-2002_English: PDF (JJF1015-2002)
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Related Standard | Status | PDF |
JJF 1015-2002 | English | 1239 |
Add to Cart
|
9 days
|
General norm for pattern evaluation and pattern approval of measuring instruments
|
JJF 1015-2002
| Obsolete |
JJF 1015-2002
|
Standard ID | JJF 1015-2002 (JJF1015-2002) | Description (Translated English) | General norm for pattern evaluation and pattern approval of measuring instruments | Sector / Industry | Metrology & Measurement Industry Standard | Classification of Chinese Standard | A50 | Word Count Estimation | 31,377 | Date of Issue | 2002-05-16 | Date of Implementation | 2002-08-01 | Older Standard (superseded by this standard) | JJF 1015-1990 | Quoted Standard | JJF 1001-1998; OIML D19-1988; OIML D15-1986 | Drafting Organization | State Administration of Quality Supervision, Inspection and Quarantine Division metering | Administrative Organization | National Measurement Technical Committee of Legal Metrology Management | Regulation (derived from) | AQSIQ Announcement No. 10, 2014 | Issuing agency(ies) | State Administration of Quality Supervision, Inspection and Quarantine | Summary | This standard applies to the type of evaluation and measurement equipment type approval, while referring to the use of prototype test when available. |
JJF 1015-2002
General norm for pattern evaluation and pattern approval of measuring instruments
National Metrology Technical Specification of the People's Republic
Measuring instrument type evaluation
And type approval general specification
Released on.2002-05-16
Implementation of.2002-08-01
The General Administration of Quality Supervision, Inspection and Quarantine issued
Replace JJF 1015-1990
This technical specification was approved by the General Administration of Quality Supervision, Inspection and Quarantine on May 16,.2002.
It will be implemented as of August 1,.2002.
Focal Point. National Legal Measurement Management Measurement Technical Committee
Drafting unit. Department of Metrology, General Administration of Quality Supervision, Inspection and Quarantine
Liaoning Provincial Bureau of Quality and Technical Supervision
This specification is interpreted by the Metrology Department of the General Administration of Quality Supervision, Inspection and Quarantine.
The main drafters of this specification.
Wang Shun'an (Measurement Department of the General Administration of Quality Supervision, Inspection and Quarantine)
Zhang Juyan (Liaoning Province Quality and Technical Supervision Bureau)
Zhang Wenmei (Liaoning Institute of Metrology)
Zhang Zijian (Liaoning Institute of Metrology)
Participate in the drafters.
Sun Lihua (Liaoning Institute of Metrology)
Tang Donglai (Liaoning Institute of Metrology)
table of Contents
1 range (1)
2 Citations (1)
3 terms (1)
3.1 Measuring instruments (1)
3.2 Type Approval (1)
3.3 Type evaluation (1)
4 Procedures for Type Approval (1)
4.1 Application (1)
4.2 Type Evaluation (2)
4.3 Type Approval (2)
5 Technical documents and test samples to be submitted by the applicant (2)
5.1 Technical Information Submitted (2)
5.2 Providing test prototypes (2)
6 Legal management requirements (3)
6.1 Unit of Measure Requirements (3)
6.2 Accuracy (maximum allowable error) requirements (3)
6.3 Requirements for the measurement of the legal system logo and measuring instruments (3)
6.4 External structural design requirements (3)
6.5 Installation Mark Requirements (3)
6.6 Other requirements (3)
7 Measurement requirements (3)
8 Technical requirements (4)
8.1 Inspection contents of technical requirements (4)
8.2 Climate and Environmental Requirements (4)
8.3 Mechanical environment requirements (4)
8.4 Safety Environment Requirements (4)
8.5 Electromagnetic compatibility requirements (4)
9 type evaluation (4)
9.1 Steps for Type Evaluation (4)
9.2 Review of technical information (4)
9.3 Formulating a type evaluation outline (4)
9.4 Test (4)
9.5 Determination of type evaluation results (5)
9.6 Unqualified treatment for the first test (6)
10 type evaluation report and sample processing (6)
11 type approval (6)
11.1 Issuance and Publication of the Type Approval Certificate (6)
11.2 Temporary Type Approval (6)
11.3 Confidentiality of prototypes and technical materials (6)
11.4 Dispute Resolution (6)
Appendix A Type Approval Application Form (7)
Appendix B Format of Approved Application Form for Imported Measuring Instruments (10)
Appendix C Type Evaluation Report Format (16)
Appendix D Measuring Instruments Type Registry Format (22)
Appendix E Type Approval Marks and Numbering Instructions for Meters (23)
Appendix F Handling Procedures for Type Approval of Measuring Instruments (25)
General specification for type evaluation and type approval of measuring instruments
1 Scope
This specification is applicable to the type evaluation and type approval of measuring instruments, and can be used as reference for the prototype test.
2 Citations
[1]JJF 1001-1998 "General Terms and Definitions of Measurement"
[2]Patternevaluationandpatternapproval, OIMLD19, edition1988 (E)
OIML International Document No. 19 "Type Evaluation and Type Approval"
[3]Principlesofselectionofcharacteristicsfortheexaminationofmeasuringinstruments,
OIMLD15, edition1986(E)
OIML International Document
|