JG/T 560-2019_English: PDF (JG/T560-2019)
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
JG/T 560-2019 | English | 669 |
Add to Cart
|
5 days [Need to translate]
|
Anchor channel assemblies for building construction
| Valid |
JG/T 560-2019
|
Standard ID | JG/T 560-2019 (JG/T560-2019) | Description (Translated English) | Anchor channel assemblies for building construction | Sector / Industry | Building & Construction Industry Standard (Recommended) | Classification of Chinese Standard | P25 | Classification of International Standard | 91.080.40 | Word Count Estimation | 29,254 | Date of Issue | 2019 | Date of Implementation | 2019-09-01 | Drafting Organization | Guangdong Jianlang Hardware Products Co., Ltd., China Academy of Building Research Co., Ltd., China Building Standards Design and Research Institute Co., Ltd., Guangdong Academy of Building Research Group Co., Ltd., Shanghai Jianke Inspection Co., Ltd., Shenzhen Xinshan Curtain Wall Technical Consulting Co., Ltd., Hilti (Shanghai) Co., Ltd., HALFEN (Beijing) Building Accessories Sales Co., Ltd., Tongji University, Guangdong Century Construction Group Co., Ltd., Guangdong Jianyijia Hardware Products Co., Ltd. | Administrative Organization | Ministry of Housing and Urban-Rural Development Building Structure Standardization Technical Committee | Proposing organization | Institute of Standards and Quotas, Ministry of Housing and Urban-Rural Development | Issuing agency(ies) | Ministry of Housing and Urban-Rural Development of the People's Republic of China |
JG/T 560-2019
Anchor channel assemblies for building construction
ICS 91.080.40
P25
People's Republic of China Construction Industry Standard
Trench-type embedded components for construction
Published on.2019-03-04
2019-09-01 implementation
Ministry of Housing and Urban-Rural Development
Content
Foreword I
1 range 1
2 Normative references 1
3 Terms and Definitions 2
4 Classification and Marking 3
5 General requirements 4
6 Requirements 5
7 Test method 8
8 Inspection rules 10
9 Signs, product accompanying documents, packaging, transportation and storage 12
Appendix A (informative) Common construction types of trough embedded components 14
Appendix B (informative) Fatigue performance test method 16
Appendix C (normative appendix) Test method for tensile load-bearing capacity of members and T-bolt sub-bearing tensile load capacity 18
Appendix D (normative appendix) Test method for anchorage bearing capacity 21
Appendix E (Normative Appendix) Test Report Template 24
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed by the Institute of Standardization of the Ministry of Housing and Urban-Rural Development.
This standard is under the jurisdiction of the Building Structure Standardization Technical Committee of the Ministry of Housing and Urban-Rural Development.
This standard was drafted. Guangdong Jianlang Hardware Products Co., Ltd., China Academy of Building Research Ltd., China Building Standard
Design and Research Institute Co., Ltd., Guangdong Provincial Academy of Building Research Group Co., Ltd., Shanghai Jianke Inspection Co., Ltd., Shenzhen Xinshan
Curtain Wall Technology Consulting Co., Ltd., Hilti (Shanghai) Co., Ltd., HALFEN (Beijing) Construction Accessories Sales Co., Ltd., Tongji University,
Guangdong Century Construction Group Co., Ltd., Guangdong Jianyijia Hardware Products Co., Ltd.
The main drafters of this standard. Shen Wenzhou, Du Wanming, Wang Hongtao, Gu Taichang, He Wei, Xu Qin, Bao Yi, Li Yujie, Cui Tingying, Li Yuanqi,
Huo Zhenbang, Shang Jingyu.
Trench-type embedded components for construction
1 Scope
This standard specifies the classification and marking, general requirements, requirements, test methods, inspection rules, markings and production of trough-type embedded components for construction.
Goods accompanying documents, packaging, transportation and storage.
This standard applies to steel trough pre-embedded components for building embedded in concrete.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 93 standard spring washer
GB/T 97.1 flat washer A grade
GB/T 197-2003 ordinary thread tolerance
GB/T 228.1-2010 tensile testing of metallic materials - Part 1
GB/T 700 carbon structural steel
GB/T 1184-1996 Shape and position tolerances without tolerance values
GB/T 1220 stainless steel rod
GB/T 1591 low alloy high strength structural steel
GB/T 1804-2000 General tolerances and tolerances for linear and angular dimensions without tolerances
GB/T 2100 general purpose corrosion resistant steel castings
GB/T 2828.1-2012.Sampling procedures for counting sampling - Part 1. Quantitative inspection by batches
plan
GB/T 3077 alloy structural steel
GB/T 3098.1 Fastener mechanical properties bolts, screws and studs
GB/T 3098.2 fastener mechanical properties nut
GB/T 3098.6 Mechanical properties of fasteners Stainless steel bolts, screws and studs
GB/T 3098.15 fastener mechanical properties stainless steel nut
GB/T 4956 magnetic substrate on non-magnetic covering layer thickness measurement magnetic method
GB/T 5267.3 fastener hot dip galvanized layer
GB/T 6967 medium and high strength stainless steel castings for engineering structures
GB/T 7659 steel castings for welded structures
GB/T 9978.1 Fire resistance test methods for building components - Part 1. General requirements
GB/T 10125 artificial atmosphere corrosion test salt spray test
GB/T 11352 casting carbon steel for general engineering
Technical requirements and test methods for hot-dip galvanized coating of GB/T 13912 metal-clad steel parts
GB/T 14436 General Rules for Industrial Product Assurance Documents
GB/T 20878 Stainless steel and heat resistant steel grades and chemical composition
GB 50010 concrete structure design specification
JG/T 560-2019
Anchor channel assemblies for building construction
ICS 91.080.40
P25
People's Republic of China Construction Industry Standard
Trench-type embedded components for construction
Published on.2019-03-04
2019-09-01 implementation
Ministry of Housing and Urban-Rural Development
Content
Foreword I
1 range 1
2 Normative references 1
3 Terms and Definitions 2
4 Classification and Marking 3
5 General requirements 4
6 Requirements 5
7 Test method 8
8 Inspection rules 10
9 Signs, product accompanying documents, packaging, transportation and storage 12
Appendix A (informative) Common construction types of trough embedded components 14
Appendix B (informative) Fatigue performance test method 16
Appendix C (normative appendix) Test method for tensile load-bearing capacity of members and T-bolt sub-bearing tensile load capacity 18
Appendix D (normative appendix) Test method for anchorage bearing capacity 21
Appendix E (Normative Appendix) Test Report Template 24
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed by the Institute of Standardization of the Ministry of Housing and Urban-Rural Development.
This standard is under the jurisdiction of the Building Structure Standardization Technical Committee of the Ministry of Housing and Urban-Rural Development.
This standard was drafted. Guangdong Jianlang Hardware Products Co., Ltd., China Academy of Building Research Ltd., China Building Standard
Design and Research Institute Co., Ltd., Guangdong Provincial Academy of Building Research Group Co., Ltd., Shanghai Jianke Inspection Co., Ltd., Shenzhen Xinshan
Curtain Wall Technology Consulting Co., Ltd., Hilti (Shanghai) Co., Ltd., HALFEN (Beijing) Construction Accessories Sales Co., Ltd., Tongji University,
Guangdong Century Construction Group Co., Ltd., Guangdong Jianyijia Hardware Products Co., Ltd.
The main drafters of this standard. Shen Wenzhou, Du Wanming, Wang Hongtao, Gu Taichang, He Wei, Xu Qin, Bao Yi, Li Yujie, Cui Tingying, Li Yuanqi,
Huo Zhenbang, Shang Jingyu.
Trench-type embedded components for construction
1 Scope
This standard specifies the classification and marking, general requirements, requirements, test methods, inspection rules, markings and production of trough-type embedded components for construction.
Goods accompanying documents, packaging, transportation and storage.
This standard applies to steel trough pre-embedded components for building embedded in concrete.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 93 standard spring washer
GB/T 97.1 flat washer A grade
GB/T 197-2003 ordinary thread tolerance
GB/T 228.1-2010 tensile testing of metallic materials - Part 1
GB/T 700 carbon structural steel
GB/T 1184-1996 Shape and position tolerances without tolerance values
GB/T 1220 stainless steel rod
GB/T 1591 low alloy high strength structural steel
GB/T 1804-2000 General tolerances and tolerances for linear and angular dimensions without tolerances
GB/T 2100 general purpose corrosion resistant steel castings
GB/T 2828.1-2012.Sampling procedures for counting sampling - Part 1. Quantitative inspection by batches
plan
GB/T 3077 alloy structural steel
GB/T 3098.1 Fastener mechanical properties bolts, screws and studs
GB/T 3098.2 fastener mechanical properties nut
GB/T 3098.6 Mechanical properties of fasteners Stainless steel bolts, screws and studs
GB/T 3098.15 fastener mechanical properties stainless steel nut
GB/T 4956 magnetic substrate on non-magnetic covering layer thickness measurement magnetic method
GB/T 5267.3 fastener hot dip galvanized layer
GB/T 6967 medium and high strength stainless steel castings for engineering structures
GB/T 7659 steel castings for welded structures
GB/T 9978.1 Fire resistance test methods for building components - Part 1. General requirements
GB/T 10125 artificial atmosphere corrosion test salt spray test
GB/T 11352 casting carbon steel for general engineering
Technical requirements and test methods for hot-dip galvanized coating of GB/T 13912 metal-clad steel parts
GB/T 14436 General Rules for Industrial Product Assurance Documents
GB/T 20878 Stainless steel and heat resistant steel grades and chemical composition
GB 50010 concrete structure design specification
......
|