Powered by Google www.ChineseStandard.net Database: 189760 (20 Apr 2024)

JB/T 9542-2015 (JBT9542-2015)

JB/T 9542-2015_English: PDF (JBT 9542-2015, JBT9542-2015)
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
JB/T 9542-2015English150 Add to Cart 0--9 seconds. Auto-delivery General specification for two-value capacitor asynchronous motors Valid JB/T 9542-2015

BASIC DATA
Standard ID JB/T 9542-2015 (JB/T9542-2015)
Description (Translated English) General specification for two-value capacitor asynchronous motors
Sector / Industry Mechanical & Machinery Industry Standard (Recommended)
Classification of Chinese Standard K24
Classification of International Standard 29.160.39
Word Count Estimation 15,174
Date of Issue 2015-04-30
Date of Implementation 2015-10-01
Older Standard (superseded by this standard) JB/T 9542-1999
Quoted Standard GB 755; GB/T 4942.1; GB/T 5171.1; GB/T 9651; GB/T 10069.1; GB 12350; JB/T 10490
Drafting Organization China Electrical Apparatus Research Institute Co., Ltd
Administrative Organization National Rotating Electrical Machinery Standardization Technical Committee
Regulation (derived from) Ministry of Industry and Information Technology Announcement (2015 No. 28)
Summary This Standard specifies the type of two-value capacitor asynchronous motor, the basic parameters and dimensions, technical requirements, test methods, inspection rules, marking, packaging, storage and transport. This Standard applies to two-value capacitor asynchronous motors (frame size 71 to 112) (hereinafter referred to as a motor), who belongs to the derivation of this series motors can also refer to a variety of motor execution.

Standards related to: JB/T 9542-2015

JB/T 9542-2015
JB
MACHINERY INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 29.160.39
K 24
RECORD NO.. 49976-2015
Replacing JB/T 9542-1999
General specification for two-value
capacitor asynchronous motors
ISSUED ON. APRIL 30, 2015
IMPLEMENTED ON. OCTOBER 1, 2015
Issued by. Ministry of Industry and Information Technology of the
People's Republic of China
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative references ... 5
3 Types, basic parameters and dimensions ... 6
4 Technical requirements ... 12
5 Test methods ... 16
6 Inspection rules ... 16
7 Marking, packaging, storage and transportation ... 19
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard replaces JB/T 9542-1999, Specification for two-value capacitor
asynchronous motors. Compared with JB/T 9542-1999, the major technical changes
are as follows.
-- it adds the requirements for motors of frame size 112;
-- it adds the requirements for power level 3,700 W;
-- it adds the requirements for IP54 and IP55;
-- it adds insulation endurance class 155 (F) in 4.9;
-- it deletes the content of 4.12 ~ 4.16 of the former standard. The same as GB
12350, it adds in 4.20 that “the safety items nor covered in this Standard shall be
as specified in GB 12350”;
-- it deletes the content of 7.5 and 7.6 of the former standard and adds in 7.4 that
“the packaging, transportation and storage of motors shall be as specified in GB/T
5171.1”;
-- it deletes the requirements for warranty period in Clause 8 of the former standard.
This Standard was proposed by the China Machinery Industry Federation.
This Standard shall be under the jurisdiction of National Technical Committee 26 on
Rotating Electrical Machines of Standardization Administration of China (SAC/TC 26).
The drafting organizations of this Standard. China National Electric Apparatus
Research Institute Co., Ltd., Kaiping Sanwei Micro Motor Co., Ltd., Wuhu Tongli Motor
Co., Ltd., Guangzhou Micromotor Co., Ltd., Hangzhou Fusheng Electrical Appliance
Co., Ltd., Vkan Certification and Testing Co. Ltd., Nanjing Nanwei Motor Co., Ltd.,
Zhejiang Linix Motor Co., Ltd., Fujian Wonder Motor Co., Ltd., Ningbo Zhenhai Hongye
Electrical Switches Factory.
The main drafters of this Standard. Zhang Chuanjia, Zhou Xingen, Lin Zhenwei, Xu
Wei, Zhang Yunchang, Luo Junbo, Lu Xiaomao, Jin Yongbo, Yu Zhuangxiang, Luo
Honghong, Wu Yunshan.
The previous editions of the standard replaced by this Standard are as follows.
-- ZBK 20003-89;
General specification for two-value
capacitor asynchronous motors
1 Scope
This Standard specifies the types, basic parameters and dimensions, technical
requirements, test methods, inspection rules, marking, packaging, storage and
transportation for two-value capacitor asynchronous motors.
This Standard applies to two-value capacitor asynchronous motors (frame size 71 ~
112) (hereinafter referred to as motors); for all kinds of motors derived from this series
of motors, this Standard can be referred to.
2 Normative references
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition dated applies to this document. For
undated references, the latest edition of the referenced documents (including all
amendments) applies to this document.
GB 755, Rotating electrical machines – Rating and performance
GB/T 4942.1, Degrees of protection provided by the integral design of rotating
electrical machined (IP code) – Classification
GB/T 5171.1, Small power motors – Part 1. General technical requirements
GB/T 9651, Test procedures for single-phase induction motor
GB/T 10069.1, Measurement of airborne noise emitted by rotating electrical
machines and the noise limits – Part 1. Method for the measurement of airborne
noise emitted by rotating electrical machines
GB 12350, Safety requirements of small-power motors
JB/T 10490, Mechanical vibration of small power motors – measurement,
evaluation and limits of vibration
batch of motors of the same user and the same type) and certificates of soundness of
motors’ shaft extension flat keys shall be provided to users along with each motor.
4.18 The surface of motors shall be free from visible spots, wrinkles, bubbles, bruises
cracks or attached dirt.
4.19 Manufacturers shall guarantee that within one year of use, motors are capable of
operating normally in not exceeding two years’ time after the manufacturing date of
manufacturers, provided that users use and store motors correctly as specified in
instructions for use and maintenance of manufacturers. If damages occur because of
ill manufacturing within the time specified or motors are not able to operate normally,
manufacturers shall repair or replace parts and even motors free of charge.
4.20 The safety items nor covered in this Standard shall be as specified in GB 12350.
5 Test methods
5.1 Electrical property test of motors shall be carried out as specified in this Standard
and GB/T 9651.
5.2 Testing of vibration shall be carried out as specified in JB/T 10490.
5.3 Testing of noise shall be carried out as specified in GB/T 10069.1.
5.4 Testing of breaking-off rotational speed of centrifugal switches shall be carried out
as specified in GB/T 9651.
5.5 Test of enclosure protection degree shall be carried out as specified in GB/T 4942.1.
5.6 Inspection of safety requirements for motors shall be carried out as specified in GB
12350.
6 Inspection rules
6.1 Exit-factory inspection
6.1.1 Each motor shall be delivered only when they pass the exit-factory inspection
and attached with a certificate of soundness.
6.1.2 The items of exit-factory inspection include.
a) mechanical inspection, including.
-- rotation inspection. during rotation, motors shall move smoothly and flexibly
without stagnation. The sound shall be uniform and harmonious without
6.2 Type inspection
6.2.1 Type inspection needs to be carried out in one of the following cases.
a) when the trial production of a new product is completed;
b) when any change in design and technology of motors which is sufficient to cause
any change in some properties, relevant type inspection items shall be carried
out;
c) when there is any unallowable deviation of current exit-factory inspection results
from previous type inspection results;
d) sampling for inspection at fixed period at least once every two years.
6.2.2 The items of type inspection include.
a) all items of exit-factory inspection;
b) determination of locked-rotor torques (determined in the cold state);
c) temperature rise test;
d) determination of efficiencies and power factors;
e) short-time over-torque test;
f) determination of maximum torques;
g) determination of minimum torques during the starting process;
h) over-speed test;
i) determination of vibration and noise;
j) determination of voltage at the capacitor end;
k) enclosure protection degree test;
l) damp heat test.
6.2.3 The number of sample machines for type test shall not be smaller than 3. In case
of any non-conformance item in samples, the number of products sampled for this item
shall be doubled. If they still fail to pass, then the batch of products can only be
delivered after the non-conformance is eliminated.
...