JB/T 9229-2024_English: PDF (JB/T9229-2024)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| JB/T 9229-2024 | English | RFQ |
ASK
|
3 days [Need to translate]
|
(Scissor lift work platform)
| Valid |
JB/T 9229-2024
|
| JB/T 9229-2013 | English | 145 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Scissors elevating work platforms
| Obsolete |
JB/T 9229-2013
|
| JB/T 9229.1-1999 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Scissors elevating platforms. Types and basic parameters
| Obsolete |
JB/T 9229.1-1999
|
| Standard ID | JB/T 9229-2024 (JB/T9229-2024) | | Description (Translated English) | (Scissor lift work platform) | | Sector / Industry | Mechanical & Machinery Industry Standard (Recommended) | | Classification of Chinese Standard | J80 | | Classification of International Standard | 53.020.99 | | Date of Issue | 2024-03-29 | | Date of Implementation | 2024-10-01 | | Older Standard (superseded by this standard) | JB/T 9229-2013 | | Issuing agency(ies) | Ministry of Industry and Information Technology | | Standard ID | JB/T 9229-2013 (JB/T9229-2013) | | Description (Translated English) | Scissors elevating work platforms | | Sector / Industry | Mechanical & Machinery Industry Standard (Recommended) | | Classification of Chinese Standard | J80 | | Classification of International Standard | 53.020.99 | | Word Count Estimation | 18,152 | | Older Standard (superseded by this standard) | JB/T 9229.1-1999; JB/T 9229.2-1999; JB/T 9229.3-1999 | | Quoted Standard | GB/T 3323-2005; GB/T 3766; GB/T 7935; GB/T 9286-1998; GB 12265.3; GB/T 13384; GB/T 20082; GB 20891; GB/T 22087-2008; GB 25849-2010; ISO 18893 | | Drafting Organization | Beijing Institute of lifting the transport machinery design | | Administrative Organization | Machinery Industry logistics warehousing equipment Standardization Technical Committee; National Standardization Technical Committee elevating work platform | | Regulation (derived from) | Ministry of Industry and Information Technology Bulletin No. 71 of 2013 | | Summary | This standard specifies the classification scissor lift work platforms, technical requirements, test methods, inspection rules, marking, packaging, transport and storage, operation and use. This standard applies to scissor lift work platform (hereinafter | | Standard ID | JB/T 9229.1-1999 (JB/T9229.1-1999) | | Description (Translated English) | Scissors elevating platforms. Types and basic parameters | | Sector / Industry | Mechanical & Machinery Industry Standard (Recommended) | | Classification of Chinese Standard | J83 | | Classification of International Standard | 53.080 | | Word Count Estimation | 7,748 | | Date of Issue | 1999-06-28 | | Date of Implementation | 2000-01-01 | | Older Standard (superseded by this standard) | ZB J83001-1986 | | Drafting Organization | Beijing Institute of lifting the transport machinery | | Administrative Organization | Beijing Institute of lifting the transport machinery | | Regulation (derived from) | Ministry of Industry and Information Technology Bulletin No. 71 of 2013 | | Summary | This standard applies to: scissor lift mechanism for the structure a variety of lifts. |
JB/T 9229-2013
JB
MECHANICAL INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 53.020.99
J 80
Filing ID. 44508-2014
Replacing JB/T 9229.1~9229.3-1999
Scissors elevating work platforms
剪叉式升降工作平台
ISSUED ON. DECEMBER 31, 2013
IMPLEMENTED ON. JULY 1, 2014
Issued by. Ministry of Industry and Information Technology of PRC.
Table of Contents
Foreword ... 4
1 Scope ... 6
2 Normative references ... 6
3 Terms and definitions ... 7
4 Classification and parameters ... 8
4.1 Category ... 8
4.2 Main parameters ... 8
5 Technical requirements ... 9
5.1 General requirements ... 9
5.2 Safety factor ... 10
5.3 Performance requirements ... 11
5.4 Stability ... 13
5.5 Working platform ... 13
5.6 Scissors mechanism ... 14
5.7 Chassis ... 14
5.8 Electrical system ... 15
5.9 Hydraulic system ... 15
5.10 Control device ... 16
5.11 Safety protection devices... 17
5.12 Reliability ... 18
6 Test methods ... 18
6.1 Test conditions ... 18
6.2 Structure parameter measurement ... 19
6.3 No-load test ... 19
6.4 Rated load test ... 20
6.5 Bearing capacity test ... 20
6.6 Measurement of the amount of deflection ... 20
6.7 Stability test ... 21
6.8 Noise measurement ... 23
6.9 Emission measurement ... 24
6.10 Driving test ... 24
6.11 Measurements of working platform, guardrail size and guardrail carrying capacity ... 24
6.12 Measurement of hydraulic oil solid particle pollution ... 24
6.13 Structural stress test ... 25
6.14 Reliability test ... 25
7 Inspection rules ... 27
7.1 Exit-factory inspection ... 27
7.2 Type inspection ... 27
8 Mark, package, transport and storage ... 29
8.1 Mark ... 29
8.2 Package ... 29
8.3 Transport ... 29
8.4 Storage ... 29
9 Operation and use ... 30
Table 1 Main parameters of scissors platforms ... 8
Table 2 The mean time between failures and reliability ... 18
Table 3 Correction values of measured noise ... 23
Table 4 Hazard coefficient of working platform failure ... 26
Table 5 Inspection items ... 28
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard replaces JB/T 9229.1-1999 “Scissors elevating platforms - Types
and basic parameters”, JB/T 9229.2-1999 “Scissors elevating platforms -
Specifications” and JB/T 9229.3-1999 “Scissors elevating platforms - Testing
method”. Compared with JB/T 9229.1-1999, the main technical changes are as
follows.
- Deleted the concept of elevating truck [Clause 2d) in JB/T 9229.1-1999];
- Modified terms and definitions as part references of GB 25849 (Clause 3 of
this edition; Appendix A of JB/T 9229.1~9229.2-1999);
- Modified height parameter series of the maximum platform from 19 grades
(0.8m~18m) to 23 grades (1m~36m) (4.2 of this edition; 3.2 of JB/T
9229.1-1999);
- Deleted model preparation (Clause 4 of JB/T 9229.1-1999);
- Deleted structure form of elevating power transfer used by steel wire rope
and/or chain, screw nut (3.3.4 and 3.8.2 of JB/T 9229.2-1999);
- Modified stability requirements and test methods so as to comply with the
provisions in GB 25849 (5.4 and 6.7 of this edition; 3.6 of JB/T 9229.2-
1999 and Clause 13, Clause 19 of JB/T 9229.3-1999);
- Modified elevating speed which is not greater than 0.4 m/s (5.3.3 of this
edition; 3.2.1 of JB/T 9229.2-1999);
- Added rotating speed which shall not be greater than 0.7 m/s (5.3.3 of this
edition);
- Added walking speed at which it can walk under elevating state (5.3.3 of
this edition);
- Modified carrying capacity from elevating 100 times at 1.25 times the rated
load to elevating 30 times at 1.33 times the rated load (5.3.5 of this edition;
3.4.1 of JB/T 9229.2-1999);
- Modified descending volume from not greater than 10 mm in 20 min to 5
mm (5.3.8 of this edition; 3.8.8 of JB/T 9229.2-1999);
- Added emission requirements for internal combustion engine driven system
(5.3.10 of this edition);
- Modified guardrail height of work platform from 0.9 m to 1.1 m (5.5.4 of this
edition; 3.7.1 of JB/T 9229.2-1999);
- Added pollution requirements for hydraulic oil solid particles (5.9.6 of this
edition);
- Added “Overload protection, level indicator, emergency stop and other
safety devices shall be set” (5.11 of this edition);
- Modified reliability requirements be represented by mean time between
failures and reliability (5.12 of this edition; 3.5 of JB/T 9229.2-1999);
- Added operation and use requirements (Clause 9 of this edition).
This Standard was proposed by China Machinery Industry Federation.
This Part shall be under the jurisdiction of Machinery Industry Standardization
Technical Committee on Logistics and Warehousing Equipment (CMIF/TC10)
and National Standardization Technical Committee on Elevating Platform
(SAC/TC335).
Main drafting organization of this Standard. Beijing Hoisting and Conveying
Machinery Design Institute.
Drafting organizations of this Standard. National Hoisting and Conveying
Machinery Quality Supervision and Inspection Center, Suzhou Elevating
Machinery Association, Shandong Jiyang Machinery Plant, Southworth
(Shanghai) Lift Table Co., Ltd, Zhejiang Dingli Machinery Co., Ltd., Dongguan
Hua Nan Junye Machinery Manufacturing Co., Ltd., and Beijing Jingcheng
Heavy Industry Co., Ltd.
Main drafters of this Standard. Lu Jianhu, Wang Shunting, Xing Zengnan, Li
Jikang, Tai Guozhu, Lu Fang, Xu Shugen, Liu Xuechun, Xin Hongyan, Ma
Jianjie and Zhu Linxing.
This Standard replaces ...
......
|