JB/T 13910.1-2020_English: PDF (JB/T13910.1-2020)
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
JB/T 13910.1-2020 | English | 80 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Piler - Part 1: Types and basic parameter
| Valid |
JB/T 13910.1-2020
|
Standard ID | JB/T 13910.1-2020 (JB/T13910.1-2020) | Description (Translated English) | (Stacker part 1: type and basic parameters) | Sector / Industry | Mechanical & Machinery Industry Standard (Recommended) | Classification of Chinese Standard | J62 | Classification of International Standard | 25.120.10 | Word Count Estimation | 8,823 | Date of Issue | 2020 | Date of Implementation | 2021-01-01 | Summary | This standard specifies the type and basic parameters of the stacker. This standard applies to the stacker on the uncoiling, leveling and shearing production line for sheet metal, and other stackers can also be used for reference. |
JB/T 13910.1-2020
JB
MACHINERY INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 25.120.10
J 62
Piler - Part 1: Types and basic parameter
ISSUED ON: APRIL 16, 2020
IMPLEMENTED ON: JANUARY 01, 2021
Issued by: Ministry of Industry and Information Technology of the People's
Republic of China
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Terms and definitions ... 4
3 Types ... 4
4 Basic parameters ... 7
4.1 Main parameters ... 7
4.2 Parameters ... 7
Foreword
JB/T 13910 Piler is divided into three parts:
-- Part 1: Types and basic parameter;
-- Part 2: Technical requirements;
-- Part 3: Accuracy.
This Part is Part 1 of JB/T 13910.
This Part was drafted in accordance with the rules given in GB/T 1.1-2009.
This Part was proposed by China Machinery Industry Federation.
This Part shall be under the jurisdiction of National Technical Committee 220 on
Forging Machinery of Standardization Administration of China (SAC/TC 220).
Drafting organizations of this Part: Taian Hualu Metalforming Machine Tool Co., Ltd.,
Shandong Laien Optic-electronic Technology Co., Ltd., SHINITE Machinery Co., Ltd.,
Shenzhen AMAE Co. Ltd., Xiamen Ruideli Calibration Checking and Measuring
Technology Co., Ltd.
Chief drafting staffs of this Part: Wang Hui, Chang Xin, Chen Haitao, Sun Qiu, Li Bo,
Zhang Yongdong, Zhan Yongqing.
This Part is released for the first time.
Piler - Part 1: Types and basic parameter
1 Scope
This Part of JB/T 13910 specifies the types and basic parameters of the piler.
This Part applies to the piler on the uncoiling, leveling and shearing production line for
sheet metal; it also applies, as a reference, to other pilers.
2 Terms and definitions
The following terms and definitions are applicable to this document.
2.1 Piler
A facility used for neatly collecting the uncoiled, leveled and sheared sheets.
2.2 Supporting frame
A device that prevents scratches on the surface of the sheet during the stacking process.
2.3 Supporting platform
A device for placing sheets during sheet stacking.
2.4 Side pushing
A device that pushes the sheets in the side direction (the width direction of the sheets)
during the stacking process of the sheets.
2.5 Longitudinal pushing
A device that pushes the sheets in the longitudinal direction (the length direction of the
sheets) during the stacking process of the sheets.
3 Types
The types of pilers are mainly divided into the following seven categories; various types
of functions can be combined arbitrarily according to user requirements:
a) Supporting frame-free and supporting platform-fixed piler: without supporting
frame, side pushing for lateral moving, longitudinal pushing for longitudinal
moving, fixed supporting platform. The structure is shown in Figure 1.
......
|