JB/T 10187-2011 PDF English
US$70.00 · In stock · Download in 9 secondsJB/T 10187-2011: Rolling bearings - Specifications for vibration (velocity) of deep groove ball bearings Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Obsolete JB/T 10187: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| JB/T 10187-2011 | English | 70 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Rolling bearings - Specifications for vibration (velocity) of deep groove ball bearings
| Obsolete |
| JB/T 10187-2000 | English | 239 |
Add to Cart
|
2 days
|
Rolling bearings. Deep groove ball bearing vibration (velocity). Specifications
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: JB/T 10187-2011
JB/T 10187-2011: Rolling bearings - Specifications for vibration (velocity) of deep groove ball bearings
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/JBT10187-2011
JB/T10197-2011
JB
ICS 21.100.20
J 11
Record No. 33611-2011
INDUSTRY STANDARD
Replacing JB/T 10187-2000
Rolling bearings - Specifications for vibration
(velocity) of deep groove ball bearings
Issued on. AUGUST 15, 2011
Implemented on. NOVEMBER 01, 2011
Issued by. Ministry of Industry and Information Technology of the
People’s Republic of China
Table of Contents
Foreword... 3
1 Scope... 4
2 Normative references... 4
3 Terms and definitions... 5
4 Group code... 5
5 Measurement and assessment method... 5
6 Technical requirements... 5
7 Inspection rules... 6
Annex A (Normative) Measurement Method for Vibration (Velocity) of
Deep Groove Ball Bearings... 11
Annex B (Normative) Measurement Method for Radial Run-out and
Axial Run-out of Mandrel... 14
Annex C (Normative) Measurement Method for Foundation Vibration of
Testing Device... 15
Foreword
This standard replaces JB/T 10187-2000 “Rolling bearings - Specifications for Vibration
(Velocity) of Deep Groove Ball Bearings”.
Compared with JB/T 10187-2000, main changes of this standard are as follows.
— Application scope of the standard is extended to Group-2 and Group-3 clearance’s
deep groove ball bearings (Chapter 1 of this edition);
— Add the group code definitions of VF3 and VF4 (Chapter 4 of this edition);
— Add the vibration (velocity) peak-value limits VP3 and VP4 corresponding to group
VF3 and VF4, and inner diameter of 3 mm ~ 60 mm (Table A of this edition);
— Add the measuring method for vibration (velocity) of deep groove ball bearings
(Annex A of this edition);
— Add the measuring method for mandrels radial run-out and axial run-out (Annex B of
this edition);
— Add the measuring method for foundation vibration of testing device (Annex C of this
edition).
— Delete “Measuring method for vibration (velocity) of miniature deep groove ball
bearing” (Annex A of edition 2000).
Annex A, annex B and annex C of this standard are normative.
This standard was proposed by China Machinery Industry Federation.
This standard shall be under the jurisdiction of National Technical Committee on Bearing
of Standardization(SAC/TC98).
Drafting organizations of this standard. Hangzhou Bearing Test & Research Center Co.,
Ltd., C&U GROUP LTD., Zhejiang Tianma Bearing Co., Ltd., and Qianchao Bearing Co.,
Ltd.
Main drafters of this standard. Chen Fanghua, Wang Lanying, Yan Weizeng, Lai Zhigang,
Zhang Tianping, Wang Jinhan, and Chen Yun.
The historical versions replaced by this standard is as follows.
- JB/T 10187-2000.
Rolling bearings - Specifications for Vibration (Velocity) of
Deep Groove Ball Bearings
1 Scope
This standard specifies the specifications for vibration (velocity) of deep groove ball
bearings (hereinafter referred as bearings) of which the appearance dimensions comply
with provisions of GB/T 276-1994; diameter series are 0, 2 and 3; nominal inner diameter
is 3 mm ~ 120 mm; radial clearances comply with Group 0, 2 and 3 clearances as
specified in GB/T 4604-2006.And it specifies the vibration (velocity) peak-value
specifications corresponding to Group V3 and V4, and the inner diameter is 3 mm ~ 60
mm.
Group V specified in this standard stands is the basic requirements to common bearing
vibration (velocity). The bearing is not marked with “V”. Group V1, V2, V3 and V4 are
applicable to those bearings that have requirements to vibration (velocity). Group VF3 and
VF4 are applicable to those bearings that have requirements to both vibration (velocity)
and vibration (velocity) peak-value.
This standard is applicable to production inspection and user acceptance inspection for
finished bearings by manufacturer.
2 Normative references
The articles contained in the following documents have become part of this standard when
they are quoted herein. For the dated documents so quoted, all the modifications
(excluding corrections) or revisions made thereafter shall not be applicable to this
standard. For the undated documents so quoted, the latest editions shall be applicable to
this standard.
GB/T 276-1994 Rolling bearings - Deep groove ball bearings - Boundary
dimensions
GB/T 2828.1-2003 Sampling procedures for inspection by attribute – Part 1.Sampling
schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 3141-1994 Industrial liquid lubricants - ISO viscosity classification
GB/T 4604-2006 Rolling bearings - Radial internal clearance
GB/T 24610.1-2009 Rolling bearings - Measuring methods for vibration - Part 1.
Fundamentals (ISO 15242-1.2004, IDT)
3 Terms and definitions
For the purpose of this standard, the following terms and definitions AND those defined in
GB/T 24610.1-2009 apply.
3.1
Peak-value of rolling bearings vibration (velocity)
The maximum positive peak-value of bearing vibration (velocity) within a given time
interval.
4 Group code
Following vibration group codes and the ones specified in JB/T 2974-2004 apply to this
standard.
5 Measurement and assessment method
5.1 Assessment method follows the provisions in Annex A.
5.2 In accordance with specified measuring method, select three roughly equidistant
positions on cylindrical outside surface of bearing outer ring in peripheral direction. During
the test of certain measuring plane, arithmetic mean of vibrations at three positions of
some frequency band is the vibration (velocity) value of the measuring plane for this
frequency band of the bearing.
6 Technical requirements
6.1 For deep groove ball bearings of which the inner diameter is 3 mm ~ 60 mm, single
bearing vibration (velocity) or vibration (velocity) peak-value of different groups shall
comply with provisions in Table 1.
7 Inspection rules
7.1 Single set of bearings (referring to any set of sample bearings) are measured
according to the provisions of this standard. If the vibration (velocity) of any frequency
band (velocity) is greater than the limit value of the corresponding groups in Table 1 or
Table 2, the bearing is deemed as a defective product. For VF3 and VF4 bearings, if
vibration (velocity) of any frequency band is greater than the limit value of corresponding
groups in Table 1 or vibration (velocity) peak-value of any frequency band is greater than
the limit value of corresponding groups in Table 1, then this bearing is deemed as a
defective product.
Annex A
(Normative)
Measurement Method for Vibration (Velocity) of Deep Groove Ball Bearings
A.1 Scope
This annex provides measurement method for vibration (velocity) of deep groove ball
bearing of which the nominal outer diameter is 9 mm ~ 260 mm.
A.2 Measurement procedure
A.2.1 Rotating speed
For bearings of which the inner diameter is no greater than 60 mm, the set rotating speed
is 1 800 r/min; for bearing of which the inner diameter is 65 mm ~ 120 mm, the set rotating
speed is 900 r/min. Rotating speed deviation shall comply with provisions in 4.1 of GB/T
24610.2-2009.
A.2.2 Axial load on bearing
Axial load shall be applied on bearing; the provisions on set values are listed in Table A.1.
A.3 Measurement and assessment method
A.3.1 Physical quantities measured
The set physical quantity during bearing vibration (velocity) measurement is radial
vibration velocity Vr.m.s. (in μm/s); the set physical quantity during vibration (velocity)
peak-value measurement is maximum peak-value (in μm/s) of radial vibration (velocity).
A.3.2 Frequency range
It shall be set within 3 frequency bands - low frequency (L), intermediate frequency (M)
and high frequency (H) - to measure the vibration (velocity) signals. The frequency ranges
are listed in Table A.2.
A.3.3 Test procedures
A.4 Measurement conditions
A.4.1 Bearing measurement conditions
Bearing measurement conditions shall follow provisions in 6.1 of GB/T 24610.2-2009.In
case of any objection against the test results of non-pre-lubricated bearings, NY-120
solvent oil is used to clean effectively. Test results after sufficient lubrication for L-AN15
total loss system oil shall prevail after solvent oil volatilizes and becomes dry. NY-120
solvent oil shall not contain tetraethyl lead and shall be filtered through a filter of which the
filtration precision is not less than 0.45 μm. L-AN15 total loss system oil shall be filtered
through a filter of which the filtration precision is not less than 0.8 μm. Other technical
requirements follow provisions of GB/T 3141-1994.
A.4.2 Testing environment and testing device conditions
A.4.2.1 Testing environment follows provisions in 6.2 of GB/T 24610.2-2009.
JB/T 10187-2011
JB/T10197-2011
JB
ICS 21.100.20
J 11
Record No. 33611-2011
INDUSTRY STANDARD
Replacing JB/T 10187-2000
Rolling bearings - Specifications for vibration
(velocity) of deep groove ball bearings
Issued on. AUGUST 15, 2011
Implemented on. NOVEMBER 01, 2011
Issued by. Ministry of Industry and Information Technology of the
People’s Republic of China
Table of Contents
Foreword... 3
1 Scope... 4
2 Normative references... 4
3 Terms and definitions... 5
4 Group code... 5
5 Measurement and assessment method... 5
6 Technical requirements... 5
7 Inspection rules... 6
Annex A (Normative) Measurement Method for Vibration (Velocity) of
Deep Groove Ball Bearings... 11
Annex B (Normative) Measurement Method for Radial Run-out and
Axial Run-out of Mandrel... 14
Annex C (Normative) Measurement Method for Foundation Vibration of
Testing Device... 15
Foreword
This standard replaces JB/T 10187-2000 “Rolling bearings - Specifications for Vibration
(Velocity) of Deep Groove Ball Bearings”.
Compared with JB/T 10187-2000, main changes of this standard are as follows.
— Application scope of the standard is extended to Group-2 and Group-3 clearance’s
deep groove ball bearings (Chapter 1 of this edition);
— Add the group code definitions of VF3 and VF4 (Chapter 4 of this edition);
— Add the vibration (velocity) peak-value limits VP3 and VP4 corresponding to group
VF3 and VF4, and inner diameter of 3 mm ~ 60 mm (Table A of this edition);
— Add the measuring method for vibration (velocity) of deep groove ball bearings
(Annex A of this edition);
— Add the measuring method for mandrels radial run-out and axial run-out (Annex B of
this edition);
— Add the measuring method for foundation vibration of testing device (Annex C of this
edition).
— Delete “Measuring method for vibration (velocity) of miniature deep groove ball
bearing” (Annex A of edition 2000).
Annex A, annex B and annex C of this standard are normative.
This standard was proposed by China Machinery Industry Federation.
This standard shall be under the jurisdiction of National Technical Committee on Bearing
of Standardization(SAC/TC98).
Drafting organizations of this standard. Hangzhou Bearing Test & Research Center Co.,
Ltd., C&U GROUP LTD., Zhejiang Tianma Bearing Co., Ltd., and Qianchao Bearing Co.,
Ltd.
Main drafters of this standard. Chen Fanghua, Wang Lanying, Yan Weizeng, Lai Zhigang,
Zhang Tianping, Wang Jinhan, and Chen Yun.
The historical versions replaced by this standard is as follows.
- JB/T 10187-2000.
Rolling bearings - Specifications for Vibration (Velocity) of
Deep Groove Ball Bearings
1 Scope
This standard specifies the specifications for vibration (velocity) of deep groove ball
bearings (hereinafter referred as bearings) of which the appearance dimensions comply
with provisions of GB/T 276-1994; diameter series are 0, 2 and 3; nominal inner diameter
is 3 mm ~ 120 mm; radial clearances comply with Group 0, 2 and 3 clearances as
specified in GB/T 4604-2006.And it specifies the vibration (velocity) peak-value
specifications corresponding to Group V3 and V4, and the inner diameter is 3 mm ~ 60
mm.
Group V specified in this standard stands is the basic requirements to common bearing
vibration (velocity). The bearing is not marked with “V”. Group V1, V2, V3 and V4 are
applicable to those bearings that have requirements to vibration (velocity). Group VF3 and
VF4 are applicable to those bearings that have requirements to both vibration (velocity)
and vibration (velocity) peak-value.
This standard is applicable to production inspection and user acceptance inspection for
finished bearings by manufacturer.
2 Normative references
The articles contained in the following documents have become part of this standard when
they are quoted herein. For the dated documents so quoted, all the modifications
(excluding corrections) or revisions made thereafter shall not be applicable to this
standard. For the undated documents so quoted, the latest editions shall be applicable to
this standard.
GB/T 276-1994 Rolling bearings - Deep groove ball bearings - Boundary
dimensions
GB/T 2828.1-2003 Sampling procedures for inspection by attribute – Part 1.Sampling
schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 3141-1994 Industrial liquid lubricants - ISO viscosity classification
GB/T 4604-2006 Rolling bearings - Radial internal clearance
GB/T 24610.1-2009 Rolling bearings - Measuring methods for vibration - Part 1.
Fundamentals (ISO 15242-1.2004, IDT)
3 Terms and definitions
For the purpose of this standard, the following terms and definitions AND those defined in
GB/T 24610.1-2009 apply.
3.1
Peak-value of rolling bearings vibration (velocity)
The maximum positive peak-value of bearing vibration (velocity) within a given time
interval.
4 Group code
Following vibration group codes and the ones specified in JB/T 2974-2004 apply to this
standard.
5 Measurement and assessment method
5.1 Assessment method follows the provisions in Annex A.
5.2 In accordance with specified measuring method, select three roughly equidistant
positions on cylindrical outside surface of bearing outer ring in peripheral direction. During
the test of certain measuring plane, arithmetic mean of vibrations at three positions of
some frequency band is the vibration (velocity) value of the measuring plane for this
frequency band of the bearing.
6 Technical requirements
6.1 For deep groove ball bearings of which the inner diameter is 3 mm ~ 60 mm, single
bearing vibration (velocity) or vibration (velocity) peak-value of different groups shall
comply with provisions in Table 1.
7 Inspection rules
7.1 Single set of bearings (referring to any set of sample bearings) are measured
according to the provisions of this standard. If the vibration (velocity) of any frequency
band (velocity) is greater than the limit value of the corresponding groups in Table 1 or
Table 2, the bearing is deemed as a defective product. For VF3 and VF4 bearings, if
vibration (velocity) of any frequency band is greater than the limit value of corresponding
groups in Table 1 or vibration (velocity) peak-value of any frequency band is greater than
the limit value of corresponding groups in Table 1, then this bearing is deemed as a
defective product.
Annex A
(Normative)
Measurement Method for Vibration (Velocity) of Deep Groove Ball Bearings
A.1 Scope
This annex provides measurement method for vibration (velocity) of deep groove ball
bearing of which the nominal outer diameter is 9 mm ~ 260 mm.
A.2 Measurement procedure
A.2.1 Rotating speed
For bearings of which the inner diameter is no greater than 60 mm, the set rotating speed
is 1 800 r/min; for bearing of which the inner diameter is 65 mm ~ 120 mm, the set rotating
speed is 900 r/min. Rotating speed deviation shall comply with provisions in 4.1 of GB/T
24610.2-2009.
A.2.2 Axial load on bearing
Axial load shall be applied on bearing; the provisions on set values are listed in Table A.1.
A.3 Measurement and assessment method
A.3.1 Physical quantities measured
The set physical quantity during bearing vibration (velocity) measurement is radial
vibration velocity Vr.m.s. (in μm/s); the set physical quantity during vibration (velocity)
peak-value measurement is maximum peak-value (in μm/s) of radial vibration (velocity).
A.3.2 Frequency range
It shall be set within 3 frequency bands - low frequency (L), intermediate frequency (M)
and high frequency (H) - to measure the vibration (velocity) signals. The frequency ranges
are listed in Table A.2.
A.3.3 Test procedures
A.4 Measurement conditions
A.4.1 Bearing measurement conditions
Bearing measurement conditions shall follow provisions in 6.1 of GB/T 24610.2-2009.In
case of any objection against the test results of non-pre-lubricated bearings, NY-120
solvent oil is used to clean effectively. Test results after sufficient lubrication for L-AN15
total loss system oil shall prevail after solvent oil volatilizes and becomes dry. NY-120
solvent oil shall not contain tetraethyl lead and shall be filtered through a filter of which the
filtration precision is not less than 0.45 μm. L-AN15 total loss system oil shall be filtered
through a filter of which the filtration precision is not less than 0.8 μm. Other technical
requirements follow provisions of GB/T 3141-1994.
A.4.2 Testing environment and testing device conditions
A.4.2.1 Testing environment follows provisions in 6.2 of GB/T 24610.2-2009.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of JB/T 10187-2011 be delivered?Answer: The full copy PDF of English version of JB/T 10187-2011 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of JB/T 10187-2011_English with my colleagues?Answer: Yes. The purchased PDF of JB/T 10187-2011_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- JB/T 10187-2011 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version JB/T 10187-2011?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version JB/T 10187-2011 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of JB/T 10187-2011?A step-by-step guide to download PDF of JB/T 10187-2011_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "JB/T 10187-2011".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|