HJ 2539-2014 (HJ2539-2014)

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Related Standard	Status	PDF
HJ 2539-2014	English	209	Add to Cart	3 days [Need to translate]	Technical requirement for environmental labeling products. Printing-Recess printing	HJ 2539-2014	Valid	HJ 2539-2014

HJ 2539-2014
Technical requirement for environmental labeling products.Printing-Recess printing
People's Republic of China National Environmental Protection Standards
Technical requirements for environmental labeling products Printing
Part III. Gravure
Technical requirement for environmental labeling products
Printing-Recess printing
Issued on.2014-09-28
2014-12-01 implementation
Issued by the Ministry of Environmental Protection
Table of Contents
Introduction .. 3
1 Scope ..4
2 Normative references .4
3 Terms and definitions .4
4 Basic requirements ..4
5 Technical contents ..5
6 test method ..7
Foreword
To implement the "People's Republic of China Environmental Protection Law", reducing the impact of intaglio printing on the environment and human health, the development of this standard.
This standard environmental requirements of raw materials and gravure printing process to make provision.
Lithographically printing processes and products in accordance with the "technical requirements for environmental labeling products Printing Part I. lithography" (HJ
2503-2012) implementation; commercial paper printing accordance with the "technical requirements for environmental labeling products Printing Part II. commercial paper printing" (HJ
2530-2013) implementation.
This standard is the first release.
This standard applies to Chinese environmental product certification mark.
This standard is developed by the Ministry of Environmental Protection Science, Technology organization.
This standard is mainly drafted by. Ministry of Environmental Protection and Development Center, China Printing Technology Association, China green cause cultural development
center.
This standard Ministry of Environmental Protection September 28, 2014 for approval.
This standard shall be December 1, 2014 implementation.
The standard explanation by the Ministry of Environmental Protection.
Technical requirements for environmental labeling products Printing
Part III. Gravure
1 Scope
This standard specifies the terms and definitions for environmental labeling products intaglio printing, basic requirements, technical contents, and testing methods.
This standard applies to paper, plastics and composite materials for the substrate of the gravure process and its products.
2 Normative references
The standard content of the following documents cited in the articles. For undated references, the effective version applies to this standard.
GB 9683 Hygienic standard for composite laminated food packaging bag
GB/T 7707 intaglio decoration print
GB/T 9851.1 printing technology terms - Part 1. Basic terminology
GB/T 9851.5 printing technology - Part 5. Gravure term
GB/T 18348 goods bar code bar code symbol print quality test
YBB 00132002 pharmaceutical packaging composite film bags General
CY/T 6 gravure product quality requirements and test methods
HJ/T 220 Environmental Labeling Products Adhesives
HJ/T 371 environmental labeling products technical requirements for gravure inks and flexographic inks
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1 gravure recess printing
Printed version of the graphic part is below the non-printing graphic part. (GB/T 9851.5)
3.2 substrates substrate
Receiving coloring agent/pigment (such as ink) final vector image. (GB/T 9851.1)
4 Basic requirements
4.1 printing quality should be consistent with GB/T 7707, GB/T 18348, CY/T 6 and other standards.
4.2 products are used in pharmaceutical packaging shall comply with the requirements of YBB 00132002, for food packaging products should conform to GB 9683
begging.
4.3 Pollutant emission of the pollutant emission standards should be consistent with the requirements of national or local regulations.
4.4 production enterprises should strengthen cleaner production.
5 Technical contents
5.1 printing raw material requirements
5.1.1 The ink should comply HJ/T 371 requirements.
5.1.2 not use polyvinyl chloride (PVC) as a substrate.
5.1.3 inks, adhesives, thinners and cleaning agents may not use solvents listed in