HOME   Cart(0)   Quotation   About-Us Tax PDFs Standard-List Powered by Google www.ChineseStandard.net Database: 189760 (15 Feb 2025)

HG/T 20614-2009 English PDF (HG20614-1997)

HG/T 20614-2009_English: PDF (HG/T20614-2009)
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
HG/T 20614-2009English85 Add to Cart 0--9 seconds. Auto-delivery Specification for ion of steel pipe flanges, gaskets and bolting (PN designated) Valid HG/T 20614-2009
HG 20614-1997EnglishRFQ ASK 9 days [Need to translate] (Steel pipe flanges, gaskets, fasteners optional provisions (European system)) Obsolete HG 20614-1997


BASIC DATA
Standard ID HG/T 20614-2009 (HG/T20614-2009)
Description (Translated English) Specification for ion of steel pipe flanges, gaskets and bolting (PN designated)
Sector / Industry Chemical Industry Industry Standard (Recommended)
Classification of Chinese Standard J15
Classification of International Standard 23.040.60
Word Count Estimation 19,174
Date of Issue 2009-02-05
Date of Implementation 2009-07-01
Older Standard (superseded by this standard) HG 20614-1997
Quoted Standard HG/T 20592; HG/T 20606; HG/T 20607; HG/T 20609; HG/T 20610; HG/T 20611; HG/T 20612; HG/T 20613
Administrative Organization ?PRC MIIT
Regulation (derived from) Engineering [ 2009 ] No. 27
Summary This standard specifies the steel pipe flanges, gaskets and fasteners (PN series) when used in conjunction with the general rules. This standard applies to HG/T 20592 ~ HG20613 stipulated steel pipe flanges, gaskets and fasteners.

BASIC DATA
Standard ID HG 20614-1997 (HG20614-1997)
Description (Translated English) (Steel pipe flanges, gaskets, fasteners optional provisions (European system))
Sector / Industry Chemical Industry Industry Standard
Classification of Chinese Standard J15
Classification of International Standard 23.040.60
Word Count Estimation 31,398
Date of Issue 1997/11/27
Date of Implementation 1998/2/1
Older Standard (superseded by this standard) HGJ 44��76-1991
Regulation (derived from) Chemical Industry National Standard, Industry Standard and the International Standard Catalog 2006; Industry-Science [2009] No. 27


HG/T 20614-2009 Chemical Industry Standard of the People's Republic of China HG Replacing HG 20614-1997 Specification for Selection of Steel Pipe Flanges, Gaskets and Bolting (PN designated) (PN 系列) ISSUED ON. FEBRUARY 5, 2009 IMPLEMENTED ON. JULY 1, 2009 Issued by. Ministry of Industry and Information Technology of the People's Republic of China [Including Corrigendum/Modification confirmed in May 2012. Text in RED] Contents 2. Normative References ... 3  3. Selection Specification ... 3  Appendix A (Informative) Operating Instructions of the Pipe Flange for Gaskets ... 13  1. Scope This standard specifies the general rules for selection of the steel pipe flange, gaskets and bolting (PN designated). This standard is applicable to the steel pipe flange, gaskets and bolting which are specified in the HG/T 20592 - HG/T 20613. 2. Normative References The following provisions contained in the following standards are turned into the provisions of this national standard by being referred in this national standard. For date reference, the subsequent amendments to (excluding amending error in the text) or revisions of, any of these publications do not apply. And parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For undated references, its latest edition referred to applies. HG/T 20592 "Steel Pipe Flanges (PN Designated)" HG/T 20606 "Non-metallic Flat Gaskets for use with Steel Pipe Flanges (PN designated)" HG/T 20607 "PTFE Envelope Gaskets for use with Steel Pipe Flanges (PN designated)" HG/T 20609 "Metal Jacketed Gaskets for use with Steel Pipe Flanges (PN designated)" HG/T 20610 "Spiral Wound Gaskets for use with Steel Pipe Flanges (PN designated" HG/T 20611 "Covered Serrated Metal Gaskets for use with Steel Pipe Flanges (PN designated)" HG/T 20612 "Metallic Ring Joint Gaskets for use with Steel Pipe Flanges (PN designated)" HG/T 20613 "Bolting for use with Steel Pipe Flanges (PN designated)" 3. Selection Specification 3.0.1 Pipe Flange 1 Type and application range of the flange shall meet the requirements of the Table 3.1.4 in HG/T 20592. 2 Type and application range of the sealing surface of the flange shall meet the requirements of Table 3.2.2 in HG/T 20592. 3 Materials for flange shall meet the requirements of Chapter 4 in HG/T 20592. As for the forging, casting or plates for other pressure-bearing equipments, if its composition and performance are not lower than those of the materials which are listed in Table 4.0.1 of HG/T 20592, the aforesaid ones may be used for the preparation of the flange. The maximum allowable working pressure of the flange shall meet the requirements of the corresponding materials which are listed in the table. 4 The maximum allowable working pressure (gauge pressure) of the flange under the working temperature shall meet the requirements of Table 7.0.1-1 - Table 7.0.1-9 in HG/T 20592. 5 When the two flanges of the flanged joint are of different pressure-temperature rating, the rated value of the flanged joint shall not exceed the lower one of the two. 6 Under the severe cyclic working condition, weld neck flange or integral type flange 3.0.2 Gasket 1 Type and application range of the gasket shall meet the requirements of HG/T 20606 - HG/T 20612. 2 Type and material of gasket shall be selected according to such requirements as fluid, working condition (pressure and temperature) as well as sealing condition of the flanged joint. The type of the sealing surface of the flange and the surface roughness shall be correspondent with the type and material of the gasket. 3 Seal load of the gasket shall be correspondent with such requirements as rated value of the flange, sealing surface type, service temperature and sealing requirements of the joint. And the material, strength as well as tightening of the bolting shall be correspondent with such requirements as type and material of the gasket as well as sealing condition of the flanged joint. 4 PTFE envelope gaskets shall not be used in such places that it is vacuum or the materials for its embedding layer is easy to be corrosive. Generally, PMF type is used for it is useful to reduce the hold-up liquid in the pipe. PFT type is used for that the nominal dimension is larger than or equal to DN350. 5 When asbestos or flexible graphite gasket are used for the stainless steel flange and nickel base alloy flange, content of chloride ion of the gasket material shall not exceed50×10-6. 6 When expanded graphite material is used for the oxidative medium, maximum service temperature shall not exceed 450 . ℃ 7 Asbestos and non asbestos gasket shall not be used for the utmost or high hazardous medium and high vacuum seal condition. 8 As PTFE flat gasket which is of the tendency to cold flow, flat face, male-female face or tongue and groove face should be adopted for its sealing surface type. 9 As for the flange that its nominal pressure is less than or equal to PN16, such rigid flange structural type as weld neck flange shall be adopted when such semimetal gasket or metal ring gasket as spiral-wound gasket and metal cladding gasket are adopted. 10 The internal diameter of the nonmetallic flat gaskets and internal ring of the wound gasket may be possibly larger than the internal diameter of the corresponding flange. If the aforesaid internal diameter of the gasket (or internal ring) shall be flush with the internal diameter of the flange, the following requirements shall be proposed by the user. 1) Integral type flange, welding neck flange or socket welding flange shall be adopted; 2) The corresponding internal diameter of the flange shall be supplied as the internal diameter of the gasket to the gasket manufactory. 11 Selection of the gasket type is listed in Table 3.0.2. (Continued) Gasket type Nominal pressure PN Nominal dimension DN (A, B) Maximum service temperature, ( )℃ Sealing surface typeg Surface roughness of the sealing surface Ra (μm) Flange type Semimetal Wound gasket 16-160 10-2000 Raised face Male-female face Tongue and groove face 3.2-6.3 Slip on neck flange Weld neck flange Integral type flange Socket welding flange Blind flange Serrated combined gasket 16-160 f Raised face Male-female face Tongue and groove face 3.2-6.3 Slip on neck flange Weld neck flange Integral type flange Socket welding flange Blind flange Semimetal/metal Metal envelope gasket 25-100 10-900 d Raised face 1.6-3.2 (carbon steel and non-ferrous metal)) 0.8-1.6 (stainless steel and nickel base alloy) Weld neck flange Integral type flange Blind flange Metal Metal ring gasket 63-160 15-400 700 Ring joint face 0.8-1.6 (Carbon steel and chrome steel) 0.4-0.8 (Stainless steel) Weld neck flange Integral type flange Blind flange Note. a The service temperature scope of all kinds of India rubber and synthetic rubber are different. It is shown in Appendix A and HG/T 20606. b Compositions and service temperature scope of the main raw materials of the non asbestos fiber rubber plate are different. It is shown in Appendix A and can be known from the manufacturing plant. c When strengthened expanded graphite plate is used for the oxidative medium, the maximum service temperature is 450 . ℃ d The service temperature scope of the metal envelope gasket is changed according to the different combination of the clad metal and filling material (see HG/T 20609). e The service temperature scope of the wound gasket is changed according to the different combination of the metal strap and filling material (see HG/T 20610). f The service temperature scope of the serrated combined gasket is changed according to the different combination of the metal serrated ring and cladding material (see HG/T 20611). g Sealing surface type and its application DN (nominal dimension) range of various flanges are shown in Table 3.0.1. b The maximum value of the arithmetic product of the service temperature and pressure (P×T) of non-metal material gasket shall not exceed the requirements of HG/20606 or can be known from the relevant gasket according to the manufacturer's brands which are listed in Appendix A. 3.0.3 Bolting 1 Type, working pressure and temperature range of the bolting shall meet the requirements of Table 5.0.4 of HG/T 20613 and Table 3.0.3-1.. 2 Strength grade of the bolting material shall meet the requirements of Table 4.0.1 of HG/T 20613 as well as Table 3.0.3-1. 3 Commercial-grade bolting and special-grade bolting shall meet the requirements of Chapter 5 of HG/T 30613 as well as Table 3.0.3-1. 4 As for the low-temperature bolting, the low-temperature impact pliability of its material shall be specified. 5 When the bolting is used within the creep temperature, bolt load loss shall be considered which is caused by the loose of the bolt; and this affects the sealing property of the flanged joint. 6 Compared with the flange material, the material of the high-temperature bolting shall be of the close thermal coefficient of expansion. 7 Low-intensity bolting only is used for the flanged joint that the nominal pressure is less than or equal to PN 16 and the nonmetallic flat gaskets are adopted; and it shall not be used under the severe cyclic working condition. The working temperature of the low-intensity carbon-steel bolting (grade 5.6) should not be larger than 200 . ℃ 8 Hex bolt is only used fo... ......

Similar standards: HG/T 20606-2009  HG/T 20607-2009  HG/T 20609-2009  
Similar PDFs (Auto-delivered in 9 seconds): HG/T 20614-2009  GB/T 17241.6-2008  GB/T 17185-2012