Powered by Google-Search & Google-Books Chinese Standards Shop Database: 169759 (Nov 17, 2019)
 HOME   Quotation   Tax   Examples Standard-List   Contact-Us   View-Cart
  

HG/T 20611-2009

Chinese Standard: 'HG/T 20611-2009'
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusRelated Standard
HG/T 20611-2009English85 Add to Cart 0--15 minutes. Auto immediate delivery. Covered serrated metal gaskets for use with steel pipe flanges (PN designated) Valid HG/T 20611-2009
HG/T 20611-2009Chinese14 Add to Cart <=1-day [PDF from Chinese Authority, or Standard Committee, or Publishing House]

 HG/T 20611-2009 -- Click to view the ACTUAL PDF of this standard (Auto-delivered in 0~10 minutes) In 0~10 minutes time, full copy of this English-PDF will be auto-immediately delivered to your email. See samples for translation quality.  
Detail Information of HG/T 20611-2009; HG/T20611-2009
Description (Translated English): Covered serrated metal gaskets for use with steel pipe flanges (PN designated)
Sector / Industry: Chemical Industry Industry Standard (Recommended)
Classification of Chinese Standard: J15
Classification of International Standard: 23.040.60
Word Count Estimation: 12,195
Date of Issue: 2009-02-05
Date of Implementation: 2009-07-01
Older Standard (superseded by this standard): HG 20611-1997
Quoted Standard: GB/T 912; GB/T 4237; GB/T 3280; HG/T 20592; HG/T 20614; JB/T 7758.2; QB/T 3625
Administrative Organization: ?PRC MIIT
Regulation (derived from): Engineering [ 2009 ] No. 27
Summary: This standard specifies the steel pipe flanges (PN series) with a covering layer of the tooth with a combination of pad type, size, technical requirements, marking and signs. This standard applies to HG/T 20592 specified nominal pressure PN16 ~ PN160 steel pipe flanges with a covering layer of the tooth combination pad.

HG/T 20611-2009
Chemical Industry Standard
of the People's Republic of China
HG
Replacing HG 20611-1997
Covered Serrated Metal Gaskets for use with Steel
Pipe Flanges
(PN designated)
钢制管法兰用具有覆盖层的齿形组合垫
(PN系列)
ISSUED ON. FEBRUARY 5, 2009
IMPLEMENTED ON. JULY 1, 2009
Issued by. Ministry of Industry and Information Technology of the People's
Republic of China
Contents
1. Scope ... 3 
2. Normative References ... 3 
3. General Provisions ... 3 
3.1 Type and Code Name ... 3 
3.2 Nominal Pressure and Nominal Dimension ... 4 
3.3 Usage of Gaskets ... 4 
3.4 Materials ... 5 
4. Dimension ... 5 
5. Technical Requirements ... 8 
6. Inspection ... 9 
7. Labeling... 9 
1. Scope
This standard specifies the type, dimension, technical requirements, labeling and
marking of covered serrated metal gaskets for steel pipe flanges (PN designated).
This standard is applicable to covered serrated metal gaskets for steel pipe flanges
specified in HG/T 20592 whose nominal pressure is PN16~PN160.
2. Normative References
The following standards contain provisions which, through reference in this text,
constitute provisions of this national standard. For dated reference, subsequent amendments
(excluding amending error in the text) to, or revisions of, any of these publications do not
apply. However, parties to agreement based on this standard are encouraged to research
whether the latest editions of these references are applied or not. For undated references, the
latest edition of the normative document is applicable to this national standard.
"Hot-rolled Plain Carbon and Low Alloy Structural Steel Sheets and Strips" GB/T 912
"Hot Rolled Stainless Steel Plate Sheets and Strips” GB/T 4237"Cold Rolled Stainless
Steel Plate Sheets and Strips” GB/T 3280
"Steel Pipe Flanges (PN designated)" HG/T 20592
“Specification for Selection of Steel Pipe Flanges, Gaskets and Bolting (PN designated)”
HG/T 20614
"Specification for Flexible Graphite Plates" TB/T 7758.2
"PTFE Sheers" QB/T 3625
3. General Provisions
3.1 Type and Code Name
The type, code name, section form and applicable flange sealing surface of gaskets shall meet
the provisions of Table 3.1.
Table 3.3.1 Service Temperature Scope of Gaskets
Serrated metal-ring material Cladding material Service temperature
scope
( )℃ Steel grade Standard Name Reference standard
0Cr18Ni9(304)
GB/T 4237
GB/T 3280
Flexible graphite JB/T 7758.2 -200~+650·
00Cr19Ni10(304L) PTFE QB/T 3625 -200~+200
0Cr17Ni12Mo2(316)
00Cr17Ni14Mo2(316L)
0Cr18N0Ti(321)
0Cr18NillNb(347)
0Cr25Ni20(310)
When it is used for oxidizing media, the maximum service temperature shall be 450 . ℃
3.4 Materials
3.4.1 The typical materials for serrated metal ring shall meet the provisions of Table 3.3.1 of
this standard; other materials may also be adopted if they are indicated at ordering.
3.4.2 The typical cladding materials are flexible graphite and PTFE plates; other cladding
materials may also be adopted if they are indicated at ordering.
3.4.3 The property of flexible graphite/PTFE plates shall meet the provisions of both Table
3.4.3 and Table 3.3.1 of this standard. Recycled materials shall not be used for PTFE.
3.4.4 The materials for integral centring ring shall be the same as that for serrated metal ring.
Unless otherwise stated by users, carbon steel can be adopted for mobile centring ring, but the
carbon steel shall meet the provisions of GB/T 912. Such surface treatment as spraying,
electroplating or others shall be adopted.
Table 3.4.3 Main Performance of Cladding Materials
Item Flexible graphite PTFE
Tensile strength (transverse)(MPa) ≥15
Content of chloride ion(X10-6) ≤50
Melting point( )℃ 327±10
4. Dimension
The dimension of gaskets shall meet the provisions of Figure 4, Table 4-1 and Table
4-2.”h" in Figure 4 is the minimum value.
Table 4-1 Dimension of Centring Ring (B type or C type) Gaskets for Raised Face Flanges (mm)
Nominal
dimension
DN
Serrated metal ring
Outside diameter of centring ringD1
Thickness
of serrated
metal ring
Thickness of
integral
centring ring
Thickness of
mobile
centring ring
t1
Cladding
thickness
Inside
diameter
D3
Outside diameterD2
PN16~PN40 PN 63~PN160 PN16 PN25 PN40 PN63 PN100 PN160
10 22 36 36 46 56
15 26 42 42 51 61
20 31 47 47 61 72
25 36 52 52 7l 82
32 46 62 62 82 88
40 53 69 69 92 103
50 65 81 81 107 113 119
65 81 100 100 127 138 144
80 95 115 115 142 148 154
100 118 138 138 162 168 174 180
125 142 162 162 192 194 210 217
150 170 190 190 218 224 247 257
200 220 240 248 273 284 290 309 324 4.0
250 270 290 300 329 340 352 364 391 388
300 320 340 356 384 400 417 424 458 458 2.0 1.5 0.5
350 375 395 415 444 457 474 486 512 ___
400 426 450 474 495 514 546 543 572 ___
450 480 506 ___ 555 564 571 ___ ___ ___
500 530 560 ___ 617 624 628 ___ ___ ___
600 630 664 ___ 734 731 747 ___ ___ ___
700 730 770 ___ 804 833 ___ ___ ___ ___
800 830 876 ___ 911 942 ___ ___ ___ ___
900 930 982 ___ 1011 1042 ___ ___ ___ ___
1000 1040 1098 ___ 1128 1155 ___ ___ ___ ___
1200 1250 1320 ___ 1342 1365 ___ ___ ___ ___
1400 1440 1522 ___ 1542 ___ ___ ___ ___ ___
1600 1650 1742 ___ 1764 ___ ___ ___ ___ ___ 5.0
1800 1850 1914 ___ 1964 ___ ___
2000 2050 2120 ___ 2168 ___ ___
1 Generally, the serrated metal ring is integrally constructed. If weld structure is adopted,
the following requirements shall be complied with.
1) Get approval from the users;
2) Complete penetration type shall be adopted as welding seam structure; there shall
be no more than two soldered joints and stress-relief heat treatment shall be carried out
after welding;
3) Before covering the cladding, the serrated form and dimension of the weld part
shall be in accordance with other parts.
2 The planeness of serrated metal ring shall be no bigger than 1/100 of the outside
diameter of the gasket.
3 The cladding materials shall be fixed firmly on the serrated metal ring so that they
won't scale off during the transportation or assembly process. The adhesive used shall have no
corrosion to the metallic materials. There shall be no more than two scabbed joints, if
overlapping is adopted, the overlap section shall be connected through bias cutting; if abutting
is adopted, a thinner cladding material shall be covered at the seam crossing.
4 There shall be proper clearance between the centering groove between the mobile
centering ring and serrated metal ring so that when it expands at heating, it will not disturb
movement. Welding method may be adopted for mobile centering ring.
5.0.4 Performance
The performance of gaskets shall meet the relevant provisions specified by users.
6. Inspection
6.0.1 The material, dimension, appearance and manufacture of gaskets shall be compliant to
the provisions of this standard.
6.0.2 Other inspection requirements may be determined through negotiating with the
producers at ordering.
7. Labeling
7.0.1 Labeling and illustration
1 The gasket shall be labeled according to the following provisions.
1) Standard name;
2) Gasket type (refer to the provisions of Table 3.1 of this standard);
3) Nominal dimension (DN);
4) Nominal pressure (PN);
5) Material code names for serrated metal ring, cladding and mobile centering ring
(refer to the provisions of Table 7.0.1). When carbon steel is used for mobile centering
ring, its code name may be omitted.
Table 7.0.1 Material Marking and Abbreviated Code Name
Material Abbreviated code name Material
Abbreviated code
name Material
Abbreviated code
name
0Cr18Ni9 304 0Cr25Ni20 310 Ni- Fe- Cr alloy Incoloy 800 IN 800
00Cr19Ni10 304L Titanium TI Zirconium ZIRC
0Cr17Ni12Mo2 316 Ni-Cu alloy Monel 400 MON
Flexible
graphite FG
00Cr17Ni14Mo2 316L Ni-Cu alloy Hastelloy B2 HAST B PTFE PTFE
0Cr18Ni10Ti 32l
Ni- Mo- Cr ......
Related standard:   HG/T 20606-2009  HG/T 20607-2009
   
 
Privacy   ···   Product Quality   ···   About Us   ···   Refund Policy   ···   Fair Trading   ···   Quick Response
Field Test Asia Limited | Taxed in Singapore: 201302277C | Copyright 2012-2019