GM/T 0027-2014 PDF English
US$150.00 · In stock · Download in 9 secondsGM/T 0027-2014: Technique requirements for smart token Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GM/T 0027-2014 | English | 150 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Technique requirements for smart token
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GM/T 0027-2014
GM/T 0027-2014: Technique requirements for smart token---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GMT0027-2014
GM
CRYPTOGRAPHY INDUSTRY STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
ICS 35.040
L 80
File No.. 44628-2014
Technique requirements for smart token
Issued on: FEBRUARY 13, 2014
Implemented on: FEBRUARY 13, 2014
Issued by. State Cryptography Administration
Table of Contents
Foreword ... 3
1 Scope .. 4
2 Normative references ... 4
3 Terms and definitions ... 5
4 Abbreviation ... 7
5 Functional requirements .. 8
6 Hardware requirements ... 10
7 Software requirements .. 10
8 Performance requirements .. 11
9 Security requirements ... 11
10 Environmental adaptability requirements ... 13
11 Reliability requirements .. 14
Annex A (normative) Algorithm performance requirements .. 15
Bibliography ... 17
Technique requirements for smart token
1 Scope
This Standard specifies functional requirements, hardware requirements,
software requirements, performance requirements, security requirements,
environmental suitability requirements and reliability requirements for smart
token.
This Standard is applicable to guide the research, development, testing and use
of smart token. It is also used to guide the testing of smart token.
2 Normative references
The following referenced documents are indispensable for the application of
this document. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any
amendments) applies.
GB/T 4208-2008, Degrees of protection provided by enclosure (IP code)
GB/T 17964, Information technology - Security techniques - Modes of
operation for a block cipher
GM/T 0002, SM4 Block Cipher Algorithm
GM/T 0003, Public Key Cryptographic Algorithm SM2 Based on Elliptic
Curve
GM/T 0004, SM3 Cryptographic Hashing Algorithm
GM/T 0005, Randomness Test Specification
GM/T 0006, Cryptographic application identifier criterion specification
GM/T 0009, SM2 Cryptography Algorithm Application Specification
GM/T 0016, Smart token cryptography application interface specification
GM/T 0017, Smart token cryptography application interface data format
specification
5 Functional requirements
5.1 Initialization
The initialization of smart token includes.
• exit-factory initialization. initialization is required for device authentication
key in exit-factory;
• application initiation. when the application provider distributes the device,
it needs to modify the device authentication key and establish the
corresponding application (the parameters to be set include the
administrator password, user password, the number of containers in the
application, the maximum number of key pairs in the application, the
maximum number of certificates that the application needs to support, the
maximum number of containers that can be created by the application).
5.2 Functional requirements for cryptographic operation
5.2.1 Block cipher algorithm
The smart token must support SM4 block cipher algorithm. Its realization shall
meet the requirements of GM/T 0002.
The work mode of block cipher algorithm shall at least include two modes.
electronic code book (ECB) and cipher block chaining (CBC), in accordance
with the requirements of GB/T 17964.
The identifier of block cipher algorithm shall meet the requirements of GM/T
0006.
5.2.2 Public key cryptographic algorithm
The smart token must support SM2 public key cryptographic algorithm. Its
realization shall meet the requirements of GM/T 0003.
The identifier of public key cryptographic algorithm shall meet the requirements
of GM/T 0006.
The use of SM2 public key cryptographic algorithm by smart token shall meet
the requirements of GM/T 0009.
5.2.3 Cryptographic hash algorithm
The smart token must support SM3 cryptographic hash algorithm. Its realization
shall meet the requirements of GM/T 0004.
The identifier of cryptographic hash algorithm shall meet the requirements of
numbers are similar or not, whether the random number has better 0, 1 balance.
5.4 Device management
The smart token shall have device management functions, for example, device
authentication key update, application deletion, application creation. The device
management functions shall meet the requirements of GM/T 0017.
5.5 Device self-test
The device self-test functions mainly include firmware integrity, correctness of
cryptographic algorithm, random number generator, algorithm coprocessor,
storage key and data integrity check. It can be self-test when the device is
powered on, and can also perform the corresponding self-check function by
providing the corresponding function service for the upper-layer application.
Should the test fail, it shall return an error status code or physical alarm
indication and stop working.
5.6 Other functions
Other functions such as application management, container management, file
management, access control, key service shall meet the requirements of GM/T
0017.
6 Hardware requirements
6.1 Interface
The hardware interface of smart token shall at least support but not limited to
one of the following interfaces. USB, SD, Dock, Lightning, Blue-tooth, NFC,
audio, WiFi, ISO 7816, ISO 14443 or other interfaces.
6.2 Chip
The core chip of smart token needs the approval of the national cryptography
management authority.
6.3 Line transfer
The line transfer protocol of smart token in the USB interface shall meet the
requirements of GM/T 0017.
7 Software requirements
APDU command supported by smart token shall meet the requirements of
GM/T 0017. If there is an extension instruction, it must be clearly stated in the
• password length should not be less than 6 characters; the number of
times of logging in by using the wrong password shall not exceed 10
times;
• securely store and access password; the password stored inside the
smart token cannot be output in any form;
• all passwords and keys transmitted between the management terminal
and the smart token shall be encrypted; ensure that in the transmission
process it can prevent replay attack.
c) the private key shall be secured during its generation, storage and use.
• the signature private key shall be generated inside the smart token,
and cannot be output in any form;
• the encrypted private key must be ciphertext-encrypted and cannot be
exported;
• the uniqueness of the private key shall be guaranteed; must not solidify
the key pair and the prime number used to generate the key pair;
• the private key shall be stored and accessed in a secure manner; the
private key cannot be leaked in any way during use;
• the smart token shall be subject to client identification before each
sensitive operation such as signing; the identity authentication
permission shall be cleared immediately after each sensitive operation
such as signing.
d) the keys stored inside the smart token shall have effective key protection
mechanisms that prevent anatomical, probing and illegal reads;
e) the smart token shall have the ability to resist various attacks, including
but not limited to.
• energy analysis attacks, including simple energy analysis and
differential energy analysis;
• electromagnetic analysis attacks, including simple electromagnetic
analysis and differential electromagnetic analysis;
• time analysis attack;
• error injection attack.
f) in the event of changes in the external environment, the smart token shall
not leak sensitive information or affect security features. Changes in the
Bibliography
[1] GB/T 2423.1-2008, Environmental testing - Part 2. Test methods - Tests A.
Cold
[2] GB/T 2423.2-2008, Environmental testing - Part 2. Test methods - Tests B.
Dry heat
[3] GB/T 2423.8-2008, Environmental testing for electric and electronic
products Part 2.Test methods Test Ed. Free fall
[4] GB/T 2423.3-2008, Environmental testing for electric and electronic
products - Part 2. Testing method test Cab. Damp heat Steady state
[5] GB/T 2423.10-2008, Environmental testing for electric and electronic
products - Part 2. Tests methods - Test Fc. Vibration (sinusoidal)
[6] GB/T 17626.2-2006, Electromagnetic compatibility (EMC) - Testing and
measurement techniques - Electrostatic discharge immunity test
[7] JR/T 0068-2012, General Specification for Information Security of On-line
Banking System
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GM/T 0027-2014 be delivered?Answer: The full copy PDF of English version of GM/T 0027-2014 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GM/T 0027-2014_English with my colleagues?Answer: Yes. The purchased PDF of GM/T 0027-2014_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GM/T 0027-2014 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GM/T 0027-2014?A step-by-step guide to download PDF of GM/T 0027-2014_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GM/T 0027-2014".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|