GB/T 9799-2024 PDF English
US$325.00 · In stock · Download in 9 secondsGB/T 9799-2024: Metallic and other inorganic coatings - Electroplated coatings of zinc with supplementary treatments on iron or steel Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 9799: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 9799-2024 | English | 325 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Metallic and other inorganic coatings - Electroplated coatings of zinc with supplementary treatments on iron or steel
| Valid |
| GB/T 9799-2011 | English | 85 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Metallic and other inorganic coatings -- Electroplated coatings of zinc with supplementary treatments on iron or steel
| Obsolete |
| GB/T 9799-1997 | English | 319 |
Add to Cart
|
3 days
|
Metallic coatings--Electroplated coatings of zinc on iron or steel
| Obsolete |
| GB/T 9799-1988 | English | RFQ |
ASK
|
3 days
|
Metallic coatings--Electroplated coatings of zinc on iron or steel
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 9799-2024
GB/T 9799-2024: Metallic and other inorganic coatings - Electroplated coatings of zinc with supplementary treatments on iron or steel
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT9799-2024
GB
NATIONAL STANDARD OF THE
PEOPLE'S REPUBLIC OF CHINA
ICS 25.220.40
CCS A 29
Replacing GB/T 9799-2011
Metallic and other inorganic coatings - Electroplated
coatings of zinc with supplementary treatments on iron or
steel
(ISO 2081.2018, MOD)
Issued on. JUNE 29, 2024
Implemented on. JANUARY 1, 2025
Issued by. State Administration for Market Regulation;
Standardization Administration of PRC.
Table of Contents
Foreword... 3
Introduction... 5
1 Scope... 6
2 Normative references... 6
3 Terms and definitions, abbreviations and symbols... 8
3.1 Terms and definitions... 8
3.2 Abbreviations... 8
3.3 Symbols... 8
4 Information that the buyer shall provide to the supplier... 8
4.1 Necessary information... 8
4.2 Additional information... 9
5 Marking... 9
5.1 General rules... 9
5.2 Marking rules... 10
5.3 Marking of base materials... 11
5.4 Marking of heat treatment requirements... 11
6 Requirements... 12
6.1 Appearance... 12
6.2 Thickness... 12
6.3 Trivalent chromium conversion coating and other post-treatment... 13
6.4 Bonding strength of the zinc electroplated coating and the trivalent chromium
conversion coating... 13
6.5 Accelerated corrosion test... 13
6.6 Stress relief heat treatment before electroplating... 14
6.7 Hydrogen embrittlement relief heat treatment... 15
7 Sampling... 15
Appendix A (normative) Marking of chromate conversion coatings and other auxiliary
treatments... 16
Appendix B (normative) Measurement of average coating thickness on small
workpieces... 18
References... 20
Foreword
This document was drafted in accordance with the provisions of GB/T 1.1-2020
Directives for standardization - Part 1.Rules for the structure and drafting of
standardizing documents.
This document replaces GB/T 9799-2011 Metallic and other inorganic coatings -
Electroplated coatings of zinc with supplementary treatments on iron or steel.
Compared with GB/T 9799-2011, in addition to structural adjustments and editorial
changes, the main technical changes are as follows.
a) Some abbreviations are deleted (see 2011 version 3.2);
b) The thickness measurement method according to GB/T 6463 is added (see 6.2);
c) The neutral salt spray corrosion resistance change table is modified (see 6.5;
see 6.5 of the 2011 edition);
d) The hydrogen embrittlement test related to GB/T 3098.17 is added (see 6.7);
e) The post-processing code is changed (see Appendix A; see Appendix A of the
2011 edition).
This document is modified in relation to ISO 2081.2018 Metallic and other inorganic
coatings - Electroplated coatings of zinc with supplementary treatments on iron or steel.
The technical differences between this document and ISO 2081.2018 and their reasons
are as follows.
-- The normative references GB/T 3138 replace ISO 2080 (see Chapter 3); GB/T
3098.17 replaces ISO 15330 (see 6.7); GB/T 5270 replaces ISO 2819 (see 6.4);
GB/T 6461 replaces ISO 10289 (see 6.5); GB/T 6462 replaces ISO 1463 (see
6.2); GB/T 9791 replaces ISO 3613 (see 6.4); GB/T 10125 replaced ISO 9227
(see 6.5.1); GB/T 12334 replaced ISO 2064 (see Chapter 3); GB/T 12609
replaced ISO 4519 (see Chapter 7); GB/T 19349 replaced ISO 9587 (see 6.6);
GB/T 19350 replaced ISO 9588 (see 6.7); GB/T 26107 replaced ISO 10587 (see
6.7), to adapt to Chinese technical conditions;
-- The requirements for trivalent chromium conversion coatings are changed (see
6.3) to adapt to Chinese technical conditions;
-- The requirements for degreasing before electroplating are changed (see 6.6) to
adapt to Chinese technical conditions.
Please note that some of the contents of this document may involve patents. The issuing
organization of this document does not assume the responsibility for identifying patents.
This document was proposed by the China Machinery Industry Federation.
This document is under the jurisdiction of the National Technical Committee on
Metallic and Non-metallic Coatings of Standardization Administration of China
(SAC/TC57).
Drafting organizations of this document. Guangdong Dazhi Chemical Technology Co.,
Ltd., Wuhan Research Institute of Materials Protection Co., Ltd. of China Academy of
Machinery, Guangzhou Hongwei Technology Co., Ltd., Nanning Bureau of Ultra-High
Voltage Transmission Company of China Southern Power Grid, Guangzhou Ultra
Union Chemicals Co., Ltd., Jiangsu Guoqiang Transportation Group Co., Ltd., Anhui
Dingwang Environmental Protection Materials Technology Co., Ltd., Hongzheng
(Fujian) Chemicals Co., Ltd., Hubei Institute of Standardization and Quality, and Hubei
Central China Technology Development of Electric Power Co., Ltd.
Main drafters of this document. Luo Yinghua, Ding Yunhu, Xu Jinlai, Chen Jisheng, Li
Xiaohua, Niu Yanli, Yuan Chong, Fan Wenxue, Ye Jindui, Wu Jun, Wang Jiang, Yi Juan,
Su Xiao, Li Huajing, Chen Mei, Xie Qiuqi, Lu Yanli.
The previous versions of this document and the documents it replaces are as follows.
-- First issued in 1997 as GB/T 9799-1997 and first revised in 2011;
-- This is the second revision.
1 Scope
This document specifies the requirements for treated zinc electroplated coatings on steel,
including the information to be provided by the purchaser to the supplier and the
requirements for heat treatment before and after electroplating.
2 Normative references
The provisions of the following documents constitute the essential clauses of this
document through normative references in this text. Among them, for referenced
documents with dates, only the versions corresponding to the dates are applicable to
this document; for referenced documents without dates, the latest versions (including
all amendments) are applicable to this document.
GB/T 3138 Metallic and other inorganic coatings - Surface treatment, metallic and
other inorganic coatings - Vocabulary (GB/T 3138-2015, ISO 2080.2008, IDT)
GB/T 3098.17 Mechanical properties of fasteners - Preloading test for the detection
of hydrogen embrittlement - Parallel bearing surface method (GB/T 3098.17-2000,
ISO 15330.1999, IDT)
3 Terms and definitions, abbreviations and symbols
The terms and definitions defined in GB/T 3138 and GB/T 12334 apply to this
document.
The following symbols apply to this document.
4 Information that the buyer shall provide to the supplier
The purchaser shall provide the supplier with the following additional information.
a) special requirements or restrictions on the pretreatment of the workpiece to be
plated (see [10] and [11] in References);
b) other requirements, such as areas for testing and rating of workpieces of
special shapes.
5 Marking
The base material shall be indicated by its chemical symbol. If it is an alloy, the main
component shall be indicated, for example.
Heat treatment requirements shall be marked as follows.
6 Requirements
The coating thickness indicated in the marking shall be the minimum local thickness.
Unless otherwise specified by the purchaser, the minimum local thickness shall be
measured at any part of the main surface that can be contacted by a ball with a diameter
of 20 mm (see 4.1 and 4.2).
After the neutral salt spray test, the samples shall be rated in accordance with the
relevant provisions of GB/T 6461.The acceptable grade shall be specified by the
purchaser.
7 Sampling
The number of samples specified in GB/T 12609 shall be randomly selected from the
inspection batch. The workpieces in the inspection sample shall be judged whether they
meet the requirements of this document, and the inspection batches shall be divided
into qualified batches or unqualified batches according to the sampling procedure of
GB/T 12609.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 9799-2024 be delivered?Answer: The full copy PDF of English version of GB/T 9799-2024 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 9799-2024_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 9799-2024_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 9799-2024 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 9799-2024?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 9799-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 9799-2024?A step-by-step guide to download PDF of GB/T 9799-2024_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 9799-2024".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|