HOME   Cart(0)   Quotation   About-Us Tax PDFs Standard-List Powered by Google www.ChineseStandard.net Database: 189759 (27 Oct 2024)

GB/T 9254.1-2021 English PDF

GB/T 9254.1-2021 (GB/T9254.1-2021, GBT 9254.1-2021, GBT9254.1-2021)
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 9254.1-2021English1235 Add to Cart 0--9 seconds. Auto-delivery Information technology equipment, multimedia equipment and receivers -- Electromagnetic compatibility -- Part 1: Emission requirements Valid GB/T 9254.1-2021
GB 9254-2008English370 Add to Cart 0--9 seconds. Auto-delivery [GB/T 9254-2008, 2013-XG1 included] Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement Obsolete GB 9254-2008
GB 9254-1998English455 Add to Cart 0--9 seconds. Auto-delivery Information technology equipment--Radio disturbance characteristics--Limits and methods of measurement Obsolete GB 9254-1998
GB 9254-1988EnglishRFQ ASK 3 days [Need to translate] Limits and methods of measurement of radio interference characterisics of information technology equipment Obsolete GB 9254-1988
Preview PDF: GB/T 9254.1-2021

BASIC DATA
Standard ID GB/T 9254.1-2021 (GB/T9254.1-2021)
Description (Translated English) Information technology equipment, multimedia equipment and receivers -- Electromagnetic compatibility -- Part 1: Emission requirements
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard L06
Classification of International Standard 33.100.10
Word Count Estimation 88,878
Date of Issue 2021-12-31
Date of Implementation 2022-07-01
Drafting Organization China Electronics Standardization Institute, Third Research Institute of China Electronics Technology Group Corporation, Lenovo (Beijing) Co., Ltd., Huawei Technologies Co., Ltd., Shanghai Institute of Quality Supervision and Inspection Technology, Fifth Electronics Research Institute of Ministry of Industry and Information Technology, China Quality Certification Center, China Academy of Information and Communications Technology, National Radio Monitoring Center Testing Center, State Radio and Television Administration Radio and Television Planning Institute, Beijing Jiaotong University, Nanjing Rongtest Testing Technology Co., Ltd., Weikai Testing Technology Co., Ltd., Beijing Futest Electronic Instruments Co., Ltd., China National Accreditation Center for Conformity Assessment, China Inspection Group Southern Testing Co., Ltd., Beijing Zunguan Technology Co., Ltd., Jiangsu Electronic Information Product Quality Supervision and Inspection Institute, Xinhua Three Technology Co., Ltd., Southeast University, China Recognition Shangdong (Shanghai) Testing
Administrative Organization National Radio Interference Standardization Technical Committee (SAC/TC 79)
Proposing organization National Radio Interference Standardization Technical Committee (SAC/TC 79)
Issuing agency(ies) State Administration for Market Regulation, National Standardization Administration


GB/T 9254.1-2021 NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 33.100.10 CCS L 06 Replacing GB/T 9254-2008, GB/T 13837-2012 Information technology equipment, multimedia equipment and receivers - Electromagnetic compatibility - Part 1: Emission requirements (CISPR 32:2015, Electromagnetic compatibility of multimedia equipment - Emission requirements, MOD) ISSUED ON: DECEMBER 31, 2021 IMPLEMENTED ON: JULY 01, 2022 Issued by: State Administration for Market Regulation; Standardization Administration of the People's Republic of China. Table of Contents Foreword ... 4  Introduction ... 9  1 Scope ... 10  2 Normative references ... 10  3 Terms, definitions and abbreviations ... 11  3.1 Terms and definitions ... 11  3.2 Abbreviations ... 16  4 Classification of equipment ... 19  5 Requirements ... 19  6 Measurements ... 20  6.1 General ... 20  6.2 Host systems and modular EUT ... 20  6.3 Measurement procedure ... 22  7 Equipment documentation ... 22  8 Applicability ... 23  9 Test report ... 23  10 Compliance ... 25  11 Measurement uncertainty ... 25  Annex A (normative) Requirements ... 26  A.1 General ... 26  A.2 Requirements for radiated emissions ... 27  A.3 Requirements for conducted emissions ... 32  Annex B (normative) Exercising the EUT during measurement and test signal specifications ... 37  B.1 General ... 37  B.2 Exercising of EUT ports ... 37  Annex C (normative) Measurement procedures, instrumentation and supporting information... 42  C.1 General ... 42  C.2 Instrumentation and supporting information ... 42  C.3 General measurement procedures ... 45  C.4 Related measurement procedures ... 49  Annex D (normative) Arrangement of EUT, local AE and associated cabling ... 60  D.1 Overview ... 60  D.2 EUT-related conditions for conducted emission measurement ... 67  D.3 EUT-related requirements for radiated measurement ... 69  Annex E (informative) Pre-scan measurements ... 76  Annex F (informative) Test report contents summary ... 78  Annex G (informative) Support information for the measurement procedures defined in C.4.1.1 ... 80  G.1 Schematic diagrams of examples of asymmetric artificial networks ... 80  G.2 Rationale for emission measurements and procedures for wired network ports ... 88  Annex H (normative) Supporting information for the measurement of outdoor unit of home satellite receiving systems ... 96  H.1 Rationale ... 96  H.2 General ... 97  H.3 Operation conditions ... 97  H.4 Specific requirements for LO measurement ... 98  H.5 EUT arrangements ... 98  Annex I (informative) Other test methods and associated limits for radiated emissions ... 100  I.1 General ... 100  I.2 Procedures for radiated emission measurements using a GTEM or RVC ... 100  I.3 Additional measurement procedure information ... 103  I.4 Use of a GTEM for radiated emission measurements ... 103  I.5 Specific EUT arrangement requirements for radiated emission measurements above 1 GHz using an RVC ... 106  I.6 Reference documents ... 107  Bibliography... 108  Foreword This document was drafted in accordance with the rules given in GB/T 1.1-2020 “Directives for standardization - Part 1: Rules for the structure and drafting of standardizing documents”. This document is Part 1 of GB/T 9254 “Information technology equipment, multimedia equipment and receivers - Electromagnetic compatibility”. The following parts of GB/T 9254 have been issued: - Part 1: Emission requirements; - Part 2: Immunity requirements. This document replaces GB/T 9254-2008 “Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement” and GB/T 13837- 2012 “Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement”. This document integrates the technical content of GB/T 9254-2008 and GB/T 13837-2012. Compared with the above two documents, except for structural adjustment and editorial changes, the main technical changes are as follows: - The scope of application is wider. It is suitable for multimedia equipment, including multimedia equipment for professional use and equipment applicable to GB/T 9254-2008 and GB/T 13837-2012; - Change the warning words in the description of Class A equipment requirements (see Chapter 7 of this document, 4.2 of GB/T 9254-2008); - Change boundary definitions for EUT, AE and associated cables in radiated emission measurements (see C.2.2.4 of this document, 10.3.1 of GB/T 9254-2008); - Delete the chapter of "Explanation of CISPR harassment limits" (See Chapter 7 of GB/T 9254-2008 and Chapter 6 of GB/T 13837-2012); - Delete the requirements for disturbance power test items (see 4.5 and 5.6 of GB/T 13837-2012); - Delete the requirements for the measurement limit of radiation power of the tuning unit of the direct-to-home satellite receiver (see 4.7 of GB/T 13837-2012); - Delete the requirements for the measurement limit of equivalent radiated power in the radiated power of the outdoor unit of the direct-to-home satellite receiver (see 4.7 of GB/T 13837-2012); - Delete the requirements for RMS-average detector measurement (see Chapter 4 of GB/T 13837-2012); - Add the limit requirements and measurement procedures for asymmetric mode conducted emissions using a combination of current probes and CVP (see Table clauses A11.2 and A12.2 and C.4.1.6.4 of this document); - For the radiated emission measurement requirements below 1GHz, add the limit of 3m measurement distance in OATS/SAC and the limit of 3m measurement distance and 10m measurement distance in FAR/FSOATS (see A.2 of this document); - Add the limits and test methods for radiated emission testing in GTEM and RVC (see Annex I of this document). The revision of this document adopts CISPR 32:2015 “Electromagnetic compatibility of multimedia equipment - Emission requirements”. This document is structurally consistent with CISPR 32:2015. The main technical differences are as follows: - According to the principle that CISPR product standards use CISPR basic standards as references in principle, change "ANSI C63.5-2006" in normative references and "ANSI C63.5" in C.2.2.2 to "GB/T 6113.106-2018"; - Delete the definition of 3.1.15 EUT. Add it as an abbreviation in 3.2; - Since the content involves the host unit, add the definition of 3.1.18 “host unit”; - According to the broadcast signal system in China, delete the relevant abbreviations AC-3, ATSC, BPSK, DMB-T, DQPSK, ISDB, ISDB-S, MPEG, OFDM applicable to other countries and regions. Add abbreviations DTMB, DVB-S/S2; - Since China has a relatively common rated voltage, delete the description that “Measurement at two nominal voltages of 230 V (±10 V) and 110 V (±10 V), using a frequency of 50 Hz or 60 Hz, is normally sufficient for an EUT intended for worldwide use” in “The measurements shall be limited to:” in Annex A of CISPR 32:2015; - In Table A.2 ~ Table A.6, Table A.9 ~ Table A.10 and Table A.13, add relevant instructions that "Tighter limits shall be applied at transition frequencies", so as to make the limit requirements clearer; - In Table A.2, Table A.4, Table A.6, Table A.10, Table A.11 and Table A.12, add relevant instructions that "The limit decreases linearly with the logarithm of the frequency", so as to make the limit requirements clearer; - According to the scope of application of the document, MODIFY the relevant contents that “AC mains ports that also have the function of a wired network port shall meet the limits given in Table A.9” in Table A.11 of CISPR 32:2015 TO “The AC power port with wired network port function (such as: power line communication function) shall meet the limits given in Table A.9 when network communication is not established. When the network communication is established, the implementation of the launch requirements is suspended, or the laws and regulations of the relevant national departments, or other national standards or industry standards may be referred to.”; - According to the scope of application of the document, MODIFY the relevant contents in A.12 that “AC mains ports that also have the function of a wired network port shall meet the limits given in Table A.10” TO “The AC power port with wired network port function (such as: power line communication function) shall meet the limits given in Table A.10 when network communication is not established. When establishing network communication, its launch requirements are suspended, or the laws and regulations of relevant national departments, or other national standards or industry standards may be referred to.”; - According to the requirements of Chinese broadcasting system, make corresponding adjustments to the provisions of Annex B for operating and test signals during measurement. The main adjustments involve Table B.3 and Table B.4; - Since the vertical color bar information is not specified in the ITU-R BT1729 standard, modify the description in Table B.1 that “A TV vertical color bar signal that meets the ITU-R BT1729 standard, with a motion unit. See NOTE 1.” TO “A standard TV color bar signal with an additional small motion unit that meets the corresponding digital TV signal format. See NOTE 1.”; [Translator NOTE: In the actual text, it is “NOTE a.”] - Since Table C.1 is selected for the emission measurement procedure for the analog/digital data port, it also corresponds to the requirements of Table A.11 and Table A.12, comprehensively considering the consistency of technical content, delete the relevant description about "AC Mains" in Table C.1; - In Table I.2~Table I.7, add relevant remarks that "Tighter limits shall be applied at transition frequencies", so as to make the limit requirements clearer. The following editorial changes have been made to this document: - Considering the scope of application of the document comprehensively, modify the document name to “Information technology equipment, multimedia equipment and receivers - Electromagnetic compatibility - Part 1: Emission requirements: - Correct the description of the 4th paragraph in A.1 that "Other measurement methods and associated limits for RVCs and GTEM cells are presented in Annex H for information." TO "Other measurement methods and associated limits for RVCs and GTEM cells are presented in Annex I for information"; - Correct the verification corresponding to Clause A1.1 of Table A.1 to "5.4 of GB/T 6113.104-2016". Description of the method "5.3 of CISPR 16-1- 4:2010/AMD1:2012" as well as A1.2 description of the corresponding verification method "5.2 of CISPR 16-1-4:2010/AMD1:2012" are all corrected to "5.4 of GB/T 6113.104-2016"; - Correct the corresponding restrictions and instructions in Clause A1.4 in Table A.1 that “Where the same room is to be used for radiated emission testing above 1 GHz, apply table clause A.3.” TO "Where the same room is to be used for radiated emission testing above 1 GHz, apply table clause A1.3.". Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. The issuing authority shall not be held responsible for identifying any or all such patent rights. This document was proposed by and shall be under the jurisdiction of National Technical Committee on Radio Interference of Standardization Administration of China (SAC/TC 79). The drafting organizations of this document: China Electronics Standardization Institute, Third Research Institute of China Electronics Technology Group Corporation, Lenovo (Beijing) Co., Ltd., Huawei Technologies Co., Ltd., Shanghai Institute of Quality Supervision and Inspection Technology, Fifth Electronics Research Institute of Ministry of Industry and Information Technology, China Quality Certification Center, China Academy of Information and Communications Technology, National Radio Monitoring Center Testing Center, Radio and Television Planning Institute of the State Administration of Radio and Television, Beijing Jiaotong University, Nanjing Rongtest Testing Technology Co., Ltd., Weikai Testing Technology Co., Ltd., Beijing Futest Electronic Instruments Co., Ltd., China National Accreditation Center for Conformity Assessment, China Inspection Group Southern Testing Co., Ltd., Beijing Zunguan Technology Co., Ltd., Jiangsu Electronic Information Product Quality Supervision and Inspection Institute, Xinhua Three Technology Co., Ltd., Southeast University, China Certification Shangdong (Shanghai) Testing Technology Co., Ltd. Main drafters of this document: Li Huanran, Zhang Qiang, Xu Wei, Lin Jingping, Lv Feiyan, Zhang Xinghai, Chen Yegang, Chen Hui, Zhu Lin, Zhou Yi, Tao Hongbo, Cai Xiaomei, Zhu Yun, Cui Qiang, Zhang Xia, Zeng Bo, Lan Defu, Liu Jia, Li Sixiong, Xu Chunfeng, Wang Minliang, Yin Hanfang, Zhou Xiang, Huang Xiaopei, Long Sheng. The previous versions of this document and its superseded documents are as follows: - It is GB 9254-1988 that was issued in 1988 for the first time. The first revision was in 1998. The second revision was in 2008. This is the third revision; - It is GB 6114-1985 that was issued in 1985 for the first time. It was GB 7236-1986 that was issued in 1986 for the first time. During the first revision in 1992, it combined GB 6114-1985 and GB 7236-1986 to form GB 13837-1992. The second revision was in 1997. The third revision was in 2003. The fourth revision was in 2012; Information technology equipment, multimedia equipment and receivers - Electromagnetic compatibility - Part 1: Emission requirements 1 Scope This document applies to information technology equipment (3.1.19) whose rated AC voltage RMS or DC voltage does not exceed 600 V, audio equipment (3.1.6), video equipment (3.1.31), broadcast receiver equipment (3.1.7), entertainment lighting control equipment (3.1.14) and combinations thereof. This document also applies to the above-mentioned equipment for professional use. The emission requirements specified in this document do not apply to intentional emissions from radio transmitters as defined by the ITU. Nor does it apply to spurious emissions associated with these intentional emissions. Equipment that specifies emission requirements for the applicable frequency bands of this document in other national standards corresponding to IEC/CISPR (except GB/T 9254 and GB/T 13837) are not included in the scope of this document. This document does not apply to on-site tests. This document contains Class A and Class B equipment. The classification of equipment is specified in Chapter 4. The objectives of this document are: a) to establish requirements which provide an adequate level of protection of the radio spectrum, allowing radio services to operate as intended in the frequency range 9 kHz to 400 GHz; b) to specify procedures to ensure the reproducibility of measurement and the repeatability of results. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ......