Powered by Google www.ChineseStandard.net Database: 189760 (18 May 2024)

GB/T 90.1-2002 English PDF

GB/T 90.1-2002 (GB/T90.1-2002, GBT 90.1-2002, GBT90.1-2002)
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 90.1-2002English599 Add to Cart 4 days [Need to translate] Fasteners -- Acceptance inspection Obsolete GB/T 90.1-2002
GB/T 90.1-2023English260 Add to Cart 0--9 seconds. Auto-delivery Fasteners -- Acceptance inspection Valid GB/T 90.1-2023


BASIC DATA
Standard ID GB/T 90.1-2002 (GB/T90.1-2002)
Description (Translated English) Fasteners. Acceptance inspection
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard J13
Classification of International Standard 21.060.01
Word Count Estimation 15,159
Date of Issue 2002-12-05
Date of Implementation 2003-06-01
Older Standard (superseded by this standard) GB/T 90-1985 Partial
Quoted Standard GB/T 2828-1987; GB/T 3098.1-2000; GB/T 3098.2-2000; GB/T 3098.3-2000; GB/T 3098.4-2000; GB/T 3098.5-2000; GB/T 3098.6-2000; GB/T 3098.7-2000; GB/T 3098.9-2002; GB/T 3098.10-1993; GB/T 3098.15-2000; GB/T 3098.16-2000; GB/T 3103.1-2002; GB/T 3103.3-2000; GB/T 3934-1983; GB/T 5267.1-2002; GB/T 5267.2-2000; GB/T 5280-2002; GB/T 5779.1-2000; GB/T 5779.2-2000; ISO 3534-2-1993; ISO 8402 - 1994
Adopted Standard ISO 3269-2000, IDT
Drafting Organization Mechanical Engineering Research Institute
Administrative Organization National Standardization Technical Committee fasteners
Proposing organization China Machinery Industry Federation
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People Republic of China
Summary This standard applies to bolts, screws, studs, nuts, pins, washers, blind rivets and other fasteners. In order not associated with the use of other fasteners supplier agreements acceptance inspection procedures in the case, demand-side fasteners must follow inspection procedures specified in this standard to determine the acceptance or rejection of a number of fasteners. The acceptance of additional requirements, in particular the product standard (if any validity rectangular nut) is given. The same procedure applies to the acceptance of technical conditions controversial circumstances. But not for high-speed mechanical assembly, special purpose or special project supervision, demanding process control procedures and batch tracking (see ISO Introduction Note) and other occasions fasteners. Acceptance of these products in the supply and demand sides inspection procedures should be consensus before confirming the order. This standard applies only to finished fasteners, does not apply to the production process of any local process control or inspection.

Standards related to: GB/T 90.1-2002

...