Powered by Google www.ChineseStandard.net Database: 189759 (7 Apr 2024)

GB/T 889.2-2016 (GBT889.2-2016)

GB/T 889.2-2016_English: PDF (GBT 889.2-2016, GBT889.2-2016)
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 889.2-2016English90 Add to Cart 0--9 seconds. Auto-delivery Prevailing torque type hexagon nuts (with non-metallic insert), style1 -- Fine pitch thread Valid GB/T 889.2-2016

BASIC DATA
Standard ID GB/T 889.2-2016 (GB/T 889.2-2016)
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard J13
Classification of International Standard 21.060.20
Word Count Estimation 7,723
Date of Issue 2016-02-24
Date of Implementation 2016-06-01
Older Standard (superseded by this standard) GB/T 889.2-2000
Quoted Standard GB/T 90.1; GB/T 90.2; GB/T 193; GB/T 1237; GB/T 3098.2; GB/T 3098.9; GB/T 3103.1; GB/T 5267.1; GB/T 5267.2; GB/T 5276; GB/T 5779.2; GB/T 6171; GB/T 6182; GB/T 9145; GB/T 16938
Adopted Standard ISO 10512-2012, MOD
Drafting Organization Productivity Promotion Center in the machine
Administrative Organization National Fastener Standardization Technical Committee (SAC/TC 85)
Regulation (derived from) National Standard Announcement No
Proposing organization China Machinery Industry Federation
Issuing agency(ies) Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China; Standardization Administration of China
Summary This standard specifies the type size, technical conditions and marking of hexagon lock nuts for fine-pitch type 1 non-metallic inserts. This standard applies to type 1 non-metallic hexagon lock nuts with nominal thread diameters D = 8 mm to 36 mm, fine thread, performance class 6, class 8 and class 10, class A and class B. Class A for nuts with D �� 16 mm; Class B for nuts with D > 16 mm.

Standards related to: GB/T 889.2-2016

GB/T 889.2-2016
GB
NATIONAL STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 21.060.20
J 13
Replacing GB/T 889.2-2000
Prevailing torque type hexagon nuts (with non-
metallic insert), style 1 - Fine pitch thread
[ISO 10512.2012, Prevailing torque type hexagon regular nuts
(with non-metallic insert) with metric fine pitch thread -
Property classes 6, 8 and10, MOD]
ISSUED ON. FEBRUARY 24, 2016
IMPLEMENTED ON. JUNE 1, 2016
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration Committee.
Table of Contents
Foreword ... 3 
1 Scope ... 6 
2 Normative references ... 6 
3 Size ... 7 
4 Technical conditions and reference standards ... 8 
5 Marks ... 9 
Foreword
This Part of GB/T 889 is one national standard of “Prevailing torque type
hexagon nuts” series. This series includes.
- GB/T 889.1, Prevailing torque type hexagon nuts (with non-metallic insert),
style 1;
- GB/T 889.2, Prevailing torque type hexagon nuts (with non-metallic insert),
Style 1--Fine pitch thread;
- GB/T 6172.2, Prevailing torque type hexagon thin nuts (with non-metallic
insert);
- GB/T 6182, Prevailing torque type hexagon nuts (with non-metallic insert),
style 2;
- GB/T 6183.1, Prevailing torque type hexagon nuts with flange (with non-
metallic insert), style 2;
- GB/T 6183.2, Prevailing torque type hexagon nuts with flange (with non-
metallic insert) with fine pitch thread;
- GB/T 6184, Prevailing torque type all-metal hexagon nuts, style 1;
- GB/T 6185.1, Prevailing torque type hexagon nuts with flange (with non-
metallic insert), style 2;
- GB/T 6185.2, Prevailing torque type all-metal hexagon nuts with flange,
style 2 - Fine pitch thread;
- GB/T 6187.1, Type 2 all-metal hexagon nuts with flange;
- GB/T 6187.2, Prevailing torque type all-metal hexagon nuts with flange
with fine pitch thread.
This Part is the second part of GB/T 889.
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard replaces GB/T 889.2-2000 Prevailing torque type hexagon nuts
(with non-metallic insert), style 1 - Fine pitch thread. Compared with GB/T
889.2-2000, the main technical changes are as follows.
- deleted “If other technical requirements are required, ... select among
(such as GB/T 3098.9 and GB/T 3103.1)” (Clause 1 of Edition 2000);
- added. “NOTE 2 Because the fine tooth thread nut height is insufficient,
the nut thread trip probability is higher, therefore, it may choose GB/T 618.”
(Clause 1);
- unified reference thread standards as GB/T 193, GB/T 9145 (Clause 2);
- modified mechanical performance grade to. 8 mm ≤ D ≤ 16 mm. 6, 8 (QT),
10 (QT); 16 mm < D ≤ 36 mm. 6 (QT), 8 (QT), 10 (QT) (Table 2);
- added QT - Quenching and tempering in mechanical properties (Table 2);
- specified that the reference standards for mechanical properties are GB/T
3098.2, GB/T 3098.9 (Table 2);
- added that electroless zinc coating technology requirements shall be
according to GB/T 5267.2 (Table 2);
- in marks, the surface treatment shall be only allowed to omit. the surface
is not treated, instead of surface galvanized passivation (5.2).
This Standard is modified on the basis of adopting ISO 10512.2012 Prevailing
torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch
thread - Property classes 6, 8 and10 (English version).
Compared with ISO 10512.2012, the technical differences and reasons in this
Standard are as follows.
- deleted “If other technical requirements are required, ... select in ISO
2320 and ISO 4759-1” (Clause 1) specified in ISO 10512 because it does
not belong to the content specified in this Part;
- in normative references, used China standards to replace International
standards (see Clause 2); added GB/T 6171 (Clause 1), GB/T 6182
(Clause 1), GB/T 90.2 (Table 2) and GB/T 1237 (5.1) as reference
standards; deleted ISO 724 as reference standard so as to comply with
basic China standards of fasteners;
- “M36×2” specified in ISO 10512 was a printing error so it remained
“M36×2” of the previous version (Table 1);
- modified mechanical performance grade to. 8 mm ≤ D ≤ 16 mm. 6, 8 (QT),
10 (QT); 16 mm < D ≤ 36 mm. 6 (QT), 8 (QT), 10 (QT) (Table 2) to expand
the standard’s application scope;
- to implement the basic standards, added QT - Quenching and tempering
(Table 2);
Prevailing torque type hexagon nuts (with non-
metallic insert), style 1 - Fine pitch thread
1 Scope
This Part of GB/T 889 specifies type sizes, technical conditions and marks of
prevailing torque type hexagon nuts (with non-metallic insert), style 1 - fine pitch
thread.
This Standard is applicable to prevailing torque type hexagon nuts (with non-
metallic insert), style 1 - fine pitch thread of which thread nominal diameters are
D = 8 mm ~ 36 mm, performance grades are 6, 8 and 10, the product grades
are A and B. Grade A is used for nuts of which D ≤ 16 mm; Grade B is used for
nuts of which D > 16 mm.
NOTE 1 This kind of nut is equivalent to GB/T 6171 plus the effective torque part.
NOTE 2 Because the fine tooth thread nut height is insufficient, the nut thread trip
probability is higher, therefore, it may choose GB/T 6182.
2 Normative references
The following referenced documents are indispensable for the application of
this document. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any
amendments) applies.
GB/T 90.1, Fasteners--Acceptance inspection (GB/T 90.1-2002, ISO
3269.2000, IDT);
GB/T 90.2, Fasteners--Marking and packaging;
GB/T 193, General purpose metric screw threads - General plan (GB/T 193-
2003, ISO 261.1998, MOD);
GB/T 1237, Designation system for fasteners (GB/T 1237-2000, eqv ISO
8991.1986);
GB/T 3098.2, Mechanical properties of fasteners - Nuts (GB/T 3098.2-2015,
ISO 898-2.2012, MOD);
GB/T 3098.9, Mechanical properties of fasteners - Prevailing torque type
steel nuts (GB/T 3098.9-2010, ISO 2320.2008, IDT)
GB/T 3103.1, Tolerances for fasteners- Bolts, screws and nuts (GB/T 3103.1-
2002, idt ISO 4759-1.2000);
GB/T 5267.1, Fasteners - Electroplated Coatings (GB/T 5267.1-2002, ISO
4042.1999, IDT);
GB/T 5267.2, Fasteners - Non-electrolytically applied zinc flake coatings
(GB/T 5267.2-2002, ISO 10683.2000, IDT);
GB/T 5276, Fasteners - Bolts, screws, studs and nuts - Symbols and
descriptions of dimensions (GB/T 5276-2015, ISO 225.2010, MOD);
GB/T 5779.2, Fasteners - Surface discontinuities - Nuts (GB/T 5779.2-2000,
idt ISO 6157-2.1995);
GB/T 6171, Hexagon Nuts, Style 1-Fine Pitch Thread (GB/T 6171-2016, ISO
8673.2012, MOD);
GB/T 6182, Prevailing torque type hexagon nuts (with non-metallic insert),
style 2 (GB/T 6182-2016, ISO 7041.2012, MOD)
GB/T 9145, General purpose metric screw threads - Limits of sizes for the
screw threads of medium quality and preferable plan (GB/T 9145-2003, ISO
965-2.1998, MOD);
GB/T 16938, Fasteners - General requirements for bolts screws studs and
nuts (GB/T 16938-2008, ISO 8992.2005, IDT).
3 Size
Type sizes of nuts are shown in Figure 1 and Table 1.
Size codes and labels shall comply with GB/T 5276.
...