Powered by Google www.ChineseStandard.net Database: 189759 (7 Apr 2024)

GB/T 8769-2010 (GBT8769-2010)

GB/T 8769-2010_English: PDF (GBT 8769-2010, GBT8769-2010)
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 8769-2010English190 Add to Cart 0--9 seconds. Auto-delivery Zirconium and zirconium alloy bars and wires Valid GB/T 8769-2010

BASIC DATA
Standard ID GB/T 8769-2010 (GB/T8769-2010)
Description (Translated English) Zirconium and zirconium alloy bars and wires
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard H63
Classification of International Standard 77.150.99
Word Count Estimation 10,129
Date of Issue 2011/1/14
Date of Implementation 2011/11/1
Older Standard (superseded by this standard) GB/T 8769-1988
Quoted Standard GB/T 228; GB/T 4338; GB/T 8180; GB/T 13747.1; GB/T 13747.2; GB/T 13747.3; GB/T 13747.4; GB/T 13747.5; GB/T 13747.6; GB/T 13747.7; GB/T 13747.8; GB/T 13747.9; GB/T 13747.10; GB/T 13747.11; GB/T 13747.12; GB/T 13747.13; GB/T 13747.14; GB/T 13747.15; GB/T 13747.16; GB/T 13747.17; GB/T 13747.18; GB/T 13747.19; GB/T 13747.20; GB/T 13747.21; GB/T 13747.22; GB/T 13747.23; GB/T 13747.24; GB/T 26314
Drafting Organization Baoji Titanium Group Co., Ltd.
Administrative Organization National Non-ferrous metals Standardization Technical Committee
Regulation (derived from) Announcement of Newly Approved National Standards No. 2 of 2011
Proposing organization China Nonferrous Metals Industry Association
Issuing agency(ies) Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China; Standardization Administration of China
Summary This Standard specifies requirements for Zirconium and Zirconium Alloy Bar and Wire, test methods, inspection rules and signs, packaging, transportation, storage and contract (or orders) content. This Standard is applicable to ingots by extrusion, forging, rolling, stretching and other technology, the Zirconium and Zirconium Alloy Bar and Wire.

Standards related to: GB/T 8769-2010

GB/T 8769-2010
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 77.150.99
H 63
Replacing GB/T 8769-1988
Zirconium and Zirconium Alloy Bars and Wires
ISSUED ON: JANUARY 14, 2011
IMPLEMENTED ON: NOVEMBER 01, 2011
Issued by: General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of PRC.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative References ... 5
3 Requirements ... 5
4 Test Method ... 10
5 Inspection Rules ... 10
6 Marking, Packaging, Transportation, Storage and Quality Certificate ... 12
7 Contract (or Purchase Order) Content ... 13
Appendix A (Informative) Comparison of Designations in this Standard, ASTM
and ASME Standards ... 14
Zirconium and Zirconium Alloy Bars and Wires
1 Scope
This Standard specifies requirements, test methods, inspection rules and markings,
packaging, transportation, storage, and contract (or purchase order) content, etc. for
zirconium and zirconium alloy bars and wires.
This Standard is applicable to zirconium and zirconium alloy bars and wires produced
by extrusion, forging, rolling, drawing and other processes.
2 Normative References
The provisions in following documents become the provisions of this Standard through
reference in this Standard. For dated references, the subsequent amendments
(excluding corrigendum) or revisions do not apply to this Standard, however, parties
who reach an agreement based on this Standard are encouraged to study if the latest
versions of these documents are applicable. For undated references, the latest edition
of the referenced document applies.
GB/T 228 Metallic Materials - Tensile Testing at Ambient Temperature
GB/T 4338 Metallic Materials - Tensile Testing at Elevated Temperature
GB/T 8180 Wrought Titanium and Titanium Alloy Products Packing, Marking,
Transporting and Storing
GB/T 13747 (all parts) Methods for Chemical Analysis of Zirconium and Zirconium
Alloys
GB/T 26314 Designation and Composition of Zirconium and Zirconium Alloys
3 Requirements
3.1 Classification of products
3.1.1 Designation, state and specification
The designation, state and specification of the bars and wires shall comply with the
provisions of Table 1
specimens shall be corroded for 72 h or 336 h in water vapor at 400°C ± 5 °C, and
10.3 +0.7 -0.5 MPa.
3.5.2 After the corrosion test, the surface of the specimen shall be a black, dense,
uniform gloss oxide film, without white or brown corrosion products; and the weight
gain of the specimen within 72h shall not exceed 22 mg/dm2. When the 72h test result
is disqualified, the cumulative time (or re-sampling) 336h corrosion test can be
continued, and the weight gain shall not exceed 38 mg/dm2.
3.6 Microstructure and macrostructure
3.6.1 Wires and bars with a diameter or side length greater than 3 mm are not allowed
to have cracks, folds, pores, segregation, tail shrinkage, metallic or non-metallic
inclusions, and other visible metallurgical defects at the horizontal macrostructure.
3.6.2 When required by the purchaser and specified in the contract, the bar can be
inspected by microstructure, and the acceptance index shall be negotiated and
determined by the supplier and the purchaser.
3.7 Ultrasonic inspection
When required by the purchaser and specified in the contract, the turning (grounding)
bars can be subjected to ultrasonic inspection, and the acceptance index shall be
negotiated and determined by the supplier and the purchaser.
3.8 Appearance quality
3.8.1 Wire
3.8.1.1 The wire is generally straight wire with cold-working or alkali pickling surface,
and a diameter of no less than 2.0 mm. Grounding surface can be supplied when
required by the buyer and specified in the contract.
3.8.1.2 The surface of the wire shall be clean, and no cracks, peeling, thorns and
inclusions are allowed.
3.8.1.3 The wire is allowed to have slight local scratches, abrasions, spots and pits
that do not exceed the allowable deviation of the wire.
3.8.2 Bar
3.8.2.1 The surface roughness Rα of the turning (grounding) bar that requires
ultrasonic flaw detection in the contract shall be no greater than 3.2μm (to meet the
flaw detection requirements).
3.8.2.2 The surface of the bar shall be clean and free of foreign objects. The surface
shall not be allowed to have transverse cracks and longitudinal splits. Scratches,
indentations and pits with a depth not exceeding half of the allowable deviation of the
size are allowed. Local defects are allowed to be removed, and the depth of removal
shall be no greater than the allowable deviation of its size, and the ratio of width to
depth of the removed part shall be greater than 6.
4 Test Method
4.1 The chemical composition analysis method shall be carried out in accordance with
the provisions of GB/T 13747.
4.2 The size and allowable deviation are measured by measuring tools with
corresponding accuracy.
4.3 The tensile performance test of the bar at room temperature shall be carried out in
accordance with the provisions of GB/T 228.
4.4 The tensile test of the bar at elevated temperature shall be carried out in
accordance with the provisions of GB/T 4338.
4.5 The corrosion performance test of the bar shall be carried out according to the
method of the supplier and the purchaser.
4.6 Microstructure and macrostructure inspection shall be carried out according to the
method determined by the supplier and the purchaser.
4.7 The ultrasonic inspection method shall be carried out according to the method
determined by the supplier and the purchaser.
4.8 The appearance quality of the bars shall be inspected visually.
5 Inspection Rules
5.1 Inspection and acceptance
5.1.1 The product shall be inspected by the supplier's quality inspection department to
ensure that the quality of the product comply with the provisions of this Standard and
the contract (or purchase order); and the quality certificate shall be filled in.
5.1.2 The purchaser shall re-inspect the received product in accordance with the
provisions of this Standard. If the re-inspection result does not conform to the
provisions of this Standard and the contract (or purchase order), it shall be submitted
to the supplier in written form; and both parties shall solve through negotiation.
Objections related to surface quality and dimensional deviations shall be submitted
within one month from the date of receipt of the product. Objections related to other
5.5 Judgment of inspection results
5.5.1 If the chemical composition of the product is disqualified, the batch of products
shall be deemed disqualified.
5.5.2 When the product size, allowable deviation, and appearance quality are
disqualified, a single piece (reel, roll) is judged to be disqualified. However, the supplier
is allowed to remove the disqualified part and re-inspect, and the qualified one shall
deliver the goods.
5.5.3 When a specimen is disqualified in the mechanical performance test result,
another double number of samples shall be taken from the batch of bars (including the
disqualified bars in the original inspection) to repeat the test for the disqualified item. If
there are still disqualified inspection results, the whole batch of bars shall be deemed
disqualified. However, the supplier is allowed to inspect the remaining bars one by one,
and the qualified ones shall be re-batched for delivery. The product can also be re-
sampled for inspection after re-heat treatment.
5.5.4 When there are cracks, non-metallic inclusions and shrinkage in the
macrostructure specimen, the supplier is allowed to inspect one by one to remove the
defective products and deliver the qualified products.
5.5.5 When the corrosion performance and microstructure are disqualified, the supplier
and the purchaser shall negotiate and resolve.
5.5.6 When the ultrasonic flaw detection is disqualified, the bar shall be judged as
disqualified.
6 Marking, Packaging, Transportation, Storage and
Quality Certificate
6.1 Marking
Labels or tags should be attached to the products that have passed the inspection,
and the marking contents on which shall be as follows:
a) The name of the manufacturer;
b) Product designation, status and specification;
c) Product batch number or smelting furnace number.
6.2 Packaging, transportation and storage
The packaging, transportation and storage of the product shall refer to the provisions
...