GB/T 8719-2022_English: PDF (GB/T8719-2022)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 8719-2022 | English | 125 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
General rule for packing, marking, storage, transport and quality certificates of carbonaceous material and products
| Valid |
GB/T 8719-2022
|
| GB/T 8719-2009 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
General rule for packing, marking, storage, transport and quality certificates of carbonaceous material and products
| Obsolete |
GB/T 8719-2009
|
| GB/T 8719-1997 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
General rule for packing, marking, storage, transport and quality certificates of carbonaceous material and products
| Obsolete |
GB/T 8719-1997
|
| GB/T 8719-1988 | English | RFQ |
ASK
|
3 days [Need to translate]
|
General rules for packings, markings, storages, transports and quality certificates of carbonaceous materials and products
| Obsolete |
GB/T 8719-1988
|
| Standard ID | GB/T 8719-2022 (GB/T8719-2022) | | Description (Translated English) | General rule for packing, marking, storage, transport and quality certificates of carbonaceous material and products | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Q52 | | Classification of International Standard | 29.050 | | Word Count Estimation | 7,768 | | Date of Issue | 2022-07-11 | | Date of Implementation | 2023-02-01 | | Older Standard (superseded by this standard) | GB/T 8719-2009 | | Drafting Organization | Shanxi Juxian Graphite New Material Co., Ltd., Kaifeng Pingmei New Carbon Material Technology Co., Ltd., Shandong Basan Graphite New Material Factory, Metallurgical Industry Information Standards Research Institute | | Administrative Organization | National Steel Standardization Technical Committee (SAC/TC 183) | | Proposing organization | China Iron and Steel Association | | Issuing agency(ies) | State Administration for Market Regulation, National Standardization Administration | | Standard ID | GB/T 8719-2009 (GB/T8719-2009) | | Description (Translated English) | General rule for packing, marking, storage, transport and quality certificates of carbonaceous material and products | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Q52 | | Classification of International Standard | 29.050 | | Word Count Estimation | 5,524 | | Date of Issue | 2009-07-08 | | Date of Implementation | 2010-04-01 | | Older Standard (superseded by this standard) | GB/T 8719-1997 | | Drafting Organization | Metallurgical Industry Information Standards Institute | | Administrative Organization | National Steel Standardization Technical Committee | | Regulation (derived from) | National Standard Approval Announcement 2009 No.9 (Total No.149) | | Proposing organization | China Iron and Steel Industry Association | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, China National Standardization Administration Committee | | Summary | This standard specifies the carbonaceous material and products for packaging materials, packaging methods, packaging requirements, signs, transportation and quality certificates. This standard applies to carbon materials and products packaging. | | Standard ID | GB/T 8719-1997 (GB/T8719-1997) | | Description (Translated English) | General rule for packing, marking, storage, transport and quality certificates of carbonaceous material and products | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Q50 | | Classification of International Standard | 29.05 | | Word Count Estimation | 5,597 | | Date of Issue | 1997/11/11 | | Date of Implementation | 1998/5/1 | | Older Standard (superseded by this standard) | GB 8719-1988 | | Quoted Standard | YB 4090-1992; YB/T 4089-1992; YB/T 4088-1992; GB 3424-1982; GB 191-1990, | | Drafting Organization | Shanghai Carbon Factory | | Administrative Organization | Ministry of Metallurgical Industry Information Standards Acedemy | | Regulation (derived from) | Announcement of Newly Approved National Standards 2009 No. 9 (No. 149 overall) | | Proposing organization | Ministry of Metallurgical Industry of the People Republic of China | | Issuing agency(ies) | State Bureau of Technical Supervision | | Summary | This Standard specifies carbonaceous material and products of packaging materials, packaging methods, packaging requirements, labeling, transport and quality certificates. This Standard is applicable to carbon materials and products. |
GB/T 8719-2022
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 29.050
CCS Q 52
Replacing GB/T 8719-2009
General rule for packing, marking, storage, transport and
quality certificates of carbonaceous material and products
ISSUED ON: JULY 11, 2022
IMPLEMENTED ON: FEBRUARY 01, 2023
Issued by: State Administration for Market Regulation;
Standardization Administration of the PRC.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative references ... 5
3 Terms and definitions ... 5
4 General rules for packing ... 5
5 Packing materials ... 6
6 Packing requirements ... 6
7 Marking ... 9
8 Storage and transport ... 10
9 Quality certificates ... 10
Foreword
This document is drafted in accordance with GB/T 1.1-2020 "Directives for
standardization - Part 1: Rules for the structure and drafting of standardizing
documents".
This document replaces GB/T 8719-2009 "General rule for packing, marking, storage,
transport and quality certificates of carbonaceous material and products". Compared
with GB/T 8719-2009, in addition to structural adjustment and editorial changes, the
main content changes are as follows:
- Add general requirements for packing (see Clause 4);
- Change the packing material requirements (see Clause 5; 3.1 of the 2009 edition);
- Change the packing requirements (see Clause 6; 3.2 and 3.3 of the 2009 edition);
- Add packing requirements for carbon electrodes (see 6.3);
- Delete the safety line width requirements for graphite electrodes (see 4.1.1 of the
2009 edition);
- Delete the grade, weight and other requirements in the graphite electrode end
marking (see 4.2 of the 2009 edition);
- Add dangerous goods transport marks and package marking methods (see 7.2.3);
- Change storage and transport requirements (see Clause 8; Clause 5 of the 2009
edition);
- Add the requirements for fire prevention during the storage and transport of
carbonaceous material and products (see 8.6);
- Change the requirements for quality certificates (see Clause 9; Clause 6 of the 2009
edition).
Attention is drawn to the possibility that some of the elements of this document may be
the subject of patent rights. The issuing authority of this document shall not be held
responsible for identifying any or all such patent rights.
This document was proposed by China Iron and Steel Association.
This document shall be under the jurisdiction of National Technical Committee 183 on
Steel of Standardization Administration of China (SAC/TC 183).
Drafting organizations of this document: Shanxi Juxian Graphite New Materials Co.,
General rule for packing, marking, storage, transport and
quality certificates of carbonaceous material and products
1 Scope
This document specifies the general rules for packing, packing materials, packing
requirements, marking, storage and transport, and quality certificates of carbonaceous
material and products.
This document applies to carbonaceous material and products.
2 Normative references
The contents of the following documents, through normative references in this text,
constitute indispensable provisions of this document. Among them, for dated references,
only the edition corresponding to that date applies to this document. For undated
references, the latest edition (including all amendments) applies to this document.
GB 190 Packing symbol of dangerous goods
GB/T 191 Packaging - Pictorial marking for handling of goods
3 Terms and definitions
There are no terms and definitions to be defined in this document.
4 General rules for packing
4.1 In order to ensure the quality and use performance of carbonaceous material and
products, and not to be damaged during handling, transport and storage; according to
the type, specification, performance, and mode of transport of carbonaceous material
and products; the packing materials and methods shall be determined, respectively.
4.2 The packing shall conform to the size of the product, to ensure that the product is
in a stable position in the packing and will not move or be damaged.
4.3 The packing shall be firm and not easily damaged, to ensure the normal use of the
product.
4.4 The packing shall meet the requirements of mechanical handling such as cranes and
forklifts.
4.5 The packing site, tools, materials, etc. shall be clean and tidy to avoid product
contamination.
5 Packing materials
5.1 It is recommended to use recyclable or degradable environmentally-friendly
materials as packing materials, including but not limited to the following materials:
wood; straw rope; iron box (drum); corrugated paper; corrugated carton (barrel); plastic
woven bag; foam plastic; plastic packaging film (bag); aluminum-plastic packaging bag;
paper bag; steel strip (galvanized steel strip, packing steel strip); plastic packing belt
(frame); plastic stretch film; plastic cloth; plastic tape; soft filler; container bag, etc.
5.2 Packing materials used for export product packing shall comply with relevant
regulations on export inspection and quarantine.
5.3 Packing materials shall comply with relevant standards or user requirements.
6 Packing requirements
6.1 General
The packing of carbonaceous material and products shall meet the requirements of
product protection, convenient transport, handling, and storage. For products
transported in containers, the shipping packing shall match the size of the container. If
the user has special requirements for packing materials and packing methods, it can be
implemented according to the agreement between the supplier and the purchaser.
6.2 Packing requirements for graphite electrodes
6.2.1 Graphite electrodes shall be packed in wooden boxes, wooden slats and bottom
brackets that meet the load-bearing requirements. The joint holes shall be protected
using foam plastic covers or corrugated cardboard covers, and reinforced with steel
straps. The contact surface between the steel strip and the electrode should be cushioned
with buffer materials such as corrugated cardboard.
6.2.2 The packing of each component shall be symmetrical and uniform. The wooden
components shall be connected in a staggered manner with steel nails. There shall be
no missing nails, rising nails, and protruding nail caps and tips. The steel strip shall be
tightly tied and shall not be loose.
6.2.3 The upper part of the bottom support shall have a block or wedge structure to
prevent the electrode from rolling. The lower part of the bottom support shall have a
The packing of graphite anode shall be carried out according to relevant standards.
6.7 Packing requirements for carbon blocks and graphite blocks for blast furnaces
6.7.1 Carbon blocks and graphite blocks for blast furnaces shall be packed in wooden
boxes and bottom brackets; and tied with steel strips. The inner lining is waterproof
with plastic cloth.
6.7.2 The space between the product and the wooden box shall be filled with soft fillers
such as corrugated paper or foam plastic. The wooden box shall be firm to prevent
loosening and bumping during transport.
6.8 Packing requirements for carburizers for steelmaking
6.8.1 According to the packing form, carburizers for steelmaking are divided into small
packages and container bags.
6.8.2 In the form of small package, the product can be put into a plastic bag and sealed
first; then put into a plastic woven bag or paper bag and sewed; or packed in a plastic
woven bag lined with plastic film and then tightly sewed.
6.8.3 For products directly packed in container bags, the container bags shall be lined
with plastic bags or lined with plastic film.
6.8.4 The packing process shall be done in a clean and dry environment.
6.9 Packing requirements for graphite-based negative electrode materials
6.9.1 According to the packing form, graphite-based negative electrode materials are
divided into small packages and container bags.
6.9.2 In the form of small package, the product can be put into a plastic packing bag
and sealed first; then packed into a corrugated carton (barrel).
6.9.3 For products directly packed in container bags, the container bags shall be lined
with plastic bags or plastic film. The container bags should not be filled to the brim. It
is recommended that each bag has a net weight of 500 kg.
6.9.4 The packing process shall be done in a clean and dry environment.
6.10 Packing requirements for activated carbon for supercapacitors
6.10.1 First put the product into a moisture-proof packing bag (it is recommended to
use a plastic sealed bag, aluminum-plastic sealed bag); then vacuum-seal it; then pack
it in a composite bag or plastic bucket, paper bucket, etc.
6.10.2 The packing environment shall meet the requirements of the product in terms of
temperature, humidity and other conditions. It shall not affect the product quality.
6.11 Packing requirements for other carbonaceous materials and products
6.11.1 When packing the product, it shall be fixed. The fragile parts shall be packed
with soft filler, to prevent loosening and damage during transport.
6.11.2 Bulk carbonaceous materials shall be packed in wooden boxes, iron boxes
(drums) or plastic woven bags lined with plastic cloth. There shall be no leakage.
7 Marking
7.1 Product marking
7.1.1 Marking for graphite electrode products
7.1.1.1 The finished graphite electrode shall be marked with a safety line on the surface
of the electrode corresponding to the bottom of the joint hole.
7.1.1.2 The safety line mark of the finished graphite electrode shall be uniform and clear.
There shall be no sticking phenomenon. There shall be no two or more safety line marks
on the same end.
7.1.1.3 The bottom of the joint hole of the finished graphite electrode shall be affixed
with a label. The label shall indicate the type, specification, bulk density, resistivity,
weight, production date, etc.
7.1.2 Marking for finished carbon blocks
Finished carbon blocks shall be marked with materials that are not easy to fall off. The
marks shall be clear and firm.
7.2 Package marking
7.2.1 The package shall, on the obvious part of the outer surface, be marked with the
name of the manufacturer, product designation, model, specification, executed standard,
grade, quantity, gross weight, and net weight, etc. Each product shall be accompanied
by a certificate of conformity or a mark of conformity.
7.2.2 The transport marks and package marking methods shall be in accordance with
the provisions of GB/T 191.
7.2.3 Dangerous goods transport marks and package marking methods shall be in
accordance with the provisions of GB 190.
7.3 Other
......
GB/T 8719-2009
General rule for packing, marking, storage, transport and quality certificates of carbonaceous material and products
ICS 29.050
Q52
National Standards of People's Republic of China
Replacing GB/T 8719-1997
Carbonaceous material and products for packaging, labeling, storage,
General provisions of the transport and quality certificates
Posted 2009-07-08
2010-04-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard replaces GB/T 8719-1997 "carbonaceous material and products for packaging, labeling, storage, transport and general quality certificate
Provisions. "
The original standard was modified following criteria.
--- Canceled wicker packaging materials;
--- Increased content protection nipple holes;
--- Increasing the graphite block packaging requirements;
--- Increase in the content of the bulk material lined with plastic sheeting;
--- Added electrode packaging site, packaging requirements;
--- Finished electrode increases safety line marking requirements;
--- Increased carbon block finished marking requirements;
--- Modify the placement, stacking requirements.
The standard proposed by China Iron and Steel Association.
This standard is under the jurisdiction of the National Steel Standardization Technical Committee.
This standard was drafted. Metallurgical Industry Information Standards Institute, Jinneng Group Datong Energy Development Co., Ltd. Carbon branch.
The main drafters of this standard. Sun Wei, Zhang Xiangjun, Zhang Ying.
This standard replaces the standards previously issued as follows.
--- GB 8719-1988, GB/T 8719-1997.
Carbonaceous material and products for packaging, labeling, storage,
General provisions of the transport and quality certificates
1 Scope
This standard specifies the carbonaceous material and products for packaging materials, packaging methods, packaging requirements, labeling, transport and quality certificates.
This standard applies to the carbonaceous material and products packaging.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 191 Packaging - Pictorial signs (GB/T 191-2008, ISO 780.1997, MOD)
3 Packaging
3.1 Packaging Materials
3.1.1 In order to ensure the quality and performance of the carbonaceous material and products, in the handling, transportation, storage process from damage should be based on carbon
Prime materials and products types, specifications, performance and transport methods were used to determine the packing material.
3.1.2 Packaging materials. wood, magnesite skids, metal box (tube), cardboard, sacks, foam, plastic bags, packing strip, plastic packaging
Braid material (box), plastic tape, wadding.
3.2 Packing method
3.2.1 electrodes wooden box, wooden frame end of care packages, fitting hole cover protects foam and packed with steel strapping.
3.2.2 electrode tab cartons, packing foam box or container into big wooden packaging and packing with steel strapping. Built with the same carton
More than two electrode tabs, the joints between separated by cardboard or foam board.
3.2.3 electrodes and connectors for one, nipple holes and connector cover with foam packaging, and then wooden box, wooden frame end of care packages, and
Packed with steel strapping.
3.2.4 graphite blocks with wooden box, wooden frame bottom tray packaging, packed with steel strapping.
3.2.5 High-purity graphite materials and products with a wooden box lined with plastic sheeting and corrugated or soft packing, packaging and bundling steel.
3.2.6 graphite anode packaging according to the relevant standards.
3.2.7 blast furnace charcoal, microporous carbon bricks with wooden box, wooden frame bottom bracket box lined with plastic wrap, and packing with steel strapping.
3.2.8 Carbon bulk material with plastic sheeting lined wooden box, metal box (tube), sacks or woven bag.
3.2.9 packaging materials and packaging methods have special requirements such as user agreement by both supply and demand.
3.3 Packaging Requirements
3.3.1 High-purity graphite materials and products. packaging site, tools, materials should be strictly clean up, do not make the product by dust, sewage contamination. easy
Broken parts and micro parts to be filled when packaging solid wadding to prevent loosening and collision damage during transport, the bulk material does not allow leakage.
3.3.2 Blast Furnace carbon block, porous carbon brick. packaging site, tools, materials should be cleaned, use cardboard or foam between the product and the wooden box
Filler materials such as soft infill. Wooden box should be firm, without distortion, to prevent loosening during transport and collision damage.
3.3.3 Electrode. packaging site, tools, materials should be clean, used wooden crates clean and tidy, are not allowed through the cracks, Ming
Noticeable glitches, the appearance of the packaging of the components to be symmetrical and uniform, not protruding nails and nail tip cap, packing strip to tension, without slack. Out
Mouth electrodes used wooden crates should be fumigated.
......
|