GB/T 8243.6-2017 (GB/T8243.6-2017, GBT 8243.6-2017, GBT8243.6-2017)
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
GB/T 8243.6-2017 | English | 90 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Methods of test for full-flow lubricating oil filters for internal combustion engines -- Part 6: Static burst pressure test
| Valid |
GB/T 8243.6-2017
|
GB/T 8243.6-2006 | English | 239 |
Add to Cart
|
3 days [Need to translate]
|
Methods of test for full-flow lubricating oil filters for internal combustion engines -- Part 6: Static burst pressure test
| Obsolete |
GB/T 8243.6-2006
|
Preview PDF: GB/T 8243.6-2017
Standard ID | GB/T 8243.6-2017 (GB/T8243.6-2017) | Description (Translated English) | Methods of test for full-flow lubricating oil filters for internal combustion engines -- Part 6: Static burst pressure test | Sector / Industry | National Standard (Recommended) | Classification of Chinese Standard | J95 | Classification of International Standard | 27.020 | Word Count Estimation | 4,425 | Date of Issue | 2017-05-12 | Date of Implementation | 2017-12-01 | Older Standard (superseded by this standard) | GB/T 8243.6-2006 | Quoted Standard | ISO 4548-1 | Adopted Standard | ISO 4548-6-2012, IDT | Drafting Organization | Shanghai Huayuan Auto Parts Co., Ltd., Linhai Jiangnan Internal Combustion Engine Accessories Factory, Guangxi Huayuan Filtration System Co., Ltd., Hangzhou Special Paper Co., Ltd., Hangzhou Fuyang North Muzhi Paper Co., Ltd., Shanghai Automotive Group Co., Ltd. Commercial Vehicle Technology Center, Hangzhou Xinxing Paper Co., Ltd., Linhai Jiangnan Filter Co., Ltd. | Administrative Organization | National Internal Combustion Engine Standardization Technical Committee (SAC/TC 177) | Proposing organization | China Machinery Industry Federation | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, China National Standardization Administration Committee | Summary | This standard specifies the ability to measure the static pressure target value of the full-flow engine oil filter of the internal combustion engine and determine the test method of the size of the static pressure and the failure mode. This standard does not apply to aviation filters and plastic type filters. |
GB/T 8243.6-2017
Methods of test for full-flow lubricating oil filters for internal combustion engines -- Part 6. Static burst pressure test
ICS 27.020
J95
National Standards of People's Republic of China
Replacing GB/T 8243.6-2006
Full-flow internal combustion engine oil filter test method
Part 6. Static Pressure Bursting Test
Methodsoftestforful-flow lubricationoilfiltersforinternal
combustionengines-Part 6. Staticburstpressuretest
(ISO 4548-6.2012, IDT)
Published on.2017-05-12
2017-12-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
China National Standardization Administration released
Foreword
GB/T 8243 "Test method for full-flow internal combustion engine oil filters" currently includes the following parts.
--- Part 1. Differential pressure - flow characteristics;
--- Part 2. Filter by-pass valve characteristics;
--- Part 3. Resistance to high pressure and high temperature characteristics;
--- Part 4. Raw Filtration Efficiency, Lifetime, and Accumulation Efficiency (Gravimetric Method);
--- Part 5. Cold start simulation and hydraulic pulse endurance test;
--- Part 6. Static pressure burst test;
---Part 7. Vibration fatigue test;
--- Part 9. Inlet and outlet check valve tests;
---Part 11. Self-cleaning filters;
--- Part 12. Determination of filtration efficiency and dust holding capacity by particle counting;
--- Part 13. Static pressure burst test for composite filters;
--- Part 15. Vibration fatigue testing of composite filters.
This part is part 6 of GB/T 8243.
This section was drafted in accordance with the rules given in GB/T 1.1-2009.
This Part replaces GB/T 8243.6-2006 "Full-flow internal combustion engine oil filter test method Part 6. Static pressure burst test
Test. Compared with GB/T 8243.6-2006, the main content changes as follows.
--- Modify the scope of application (see Chapter 1,.2006 Edition, Chapter 1);
--- Modify the provisions of the test solution (see Chapter 5,.2006 Edition, Chapter 5);
--- Modify the provisions of the first pressure holding pressure, step-up pressure gradient value and dwell time (see Chapter 6,.2006 Edition, Chapter 6);
--- Increased the schematic diagram of static pressure burst test bench (see Figure 1).
This section uses the translation method equivalent to the use of ISO 4548-6.2012 "Full internal combustion engine oil filter test method Part 6. Static
Pressure burst test (English version).
The Chinese documents that are consistent with the normatively quoted international documents in this section are as follows.
---GB/T 8243.1-2003 Internal-combustion engine full-flow oil filter test method Part 1. Differential pressure-flow characteristics
(ISO 4548-1.1997, IDT)
This part is proposed by China Machinery Industry Federation.
This part is under the jurisdiction of the National Standardization Technical Committee for Internal Combustion Engines (SAC/TC177).
This section was drafted by. Shanghai Institute of Internal Combustion Engines, Zhejiang Weitai Auto Parts Co., Ltd., Linhai Jiangnan Internal Combustion Engine Accessories Factory, and Guangxi Huayuan
Filtration System Co., Ltd., Hangzhou Special Paper Co., Ltd., Hangzhou Fuyang North Wood Pulp Co., Ltd., Shanghai Automotive Group Co., Ltd.
Company Commercial Vehicle Technology Center, Hangzhou Xinxing Paper Co., Ltd., Linhai Jiangnan Filter Co., Ltd.
Drafters of this section. Meng Hongxia, Shen Hongjie, Zhang Yu, Jin Wenhua, Zhao Yubao, Wu Anbo, Chen Qianqian, Qiao Liangliang, Li Jianming, and Feng Yihai.
The previous editions of the standards replaced by this section are.
--- GB/T 8243.6-2006.
Full-flow internal combustion engine oil filter test method
Part 6. Static Pressure Bursting Test
1 Scope
This part of GB/T 8243 specifies the ability to determine the static pressure target value of a full-flow oil filter for an internal combustion engine and determine the static pressure resistance.
Degree of magnitude and test method for determining failure mode.
This section does not apply to aviation filters and plastic type filters.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
ISO 4548-1 internal combustion engine full-flow oil filter test methods - Part 1. Differential pressure - flow characteristics (Methodsoftestfor
Ful-flow lubricationoilfiltersforintercomcombustionengines-Part 1.Differentialpressure/flow
Characteristics)
3 Terms and Definitions
The terms and definitions defined by ISO 4548-1 apply to this document.
4 Test bench
Test bench should include manual hydraulic pump or other suitable technical device, high pressure tubing, valves, range 0kPa~3000kPa or higher
Pressure gauge (see 6.6) and install a transparent protective cover. The schematic diagram of the test bench is shown in Figure 1.
5 test solution
The oil with an ISO viscosity class of 22 and a viscosity index (VI) of 96 at ambient temperature (or SAE 5W oil) should be used.
6 Test preparation and test procedures
6.1 Install the filter according to the recommended tightening torque. If the tightening torque gives tolerances, the lower deviation should be used. Filters and fittings
The connection should be the same as the product's installation.
6.2 Connect the hydraulic pump to the inlet of the filter or fitting and connect an outlet valve at the outlet of the filter or fitting. Outlet valve outlet
Should be placed at the highest point of the entire system.
6.3 Operate the hydraulic pump and pump the oil into the system until the outflow of oil is observed at the outlet of the outlet valve. This indicates that all air has been removed from the system
Discharged.
6.4 Close the oil valve and install a protective cover between the test observer and the filter.
6.5 Gradually increase the oil pressure to.200 kPa, maintain the pressure for about 1 minute, and check if the filter and all joints leak.
Note. If an approximate rupture pressure is known, the first pressure may rise to 50% of the approximate value of the known rupture pressure. This reduces the test time for high pressure filters.
And it will not affect the data quality.
6.6 Increase the oil pressure at a controlled pressure gradient of approximately 345kPa to 690kPa per minute, hold the pressure for approximately 15 seconds after each pressure increase, and inspect
If the filter leaks or deforms. Continue to raise the oil pressure to test until the customer's specified target pressure value is reached [see 7g)] or
Failure.
6.7 Reduce the oil pressure to zero. Check the filter for permanent deformation and tightening torque.
Record the residual tightening torque and return it to its original value if it is loose.
6.8 Re-increase the oil pressure gradually until it reaches the customer's specified target pressure value, then control it at about 345kPa~690kPa per minute.
The pressure gradient is raised to increase the oil pressure. After each pressure increase, the pressure is maintained for about 15 seconds until the filter finally fails.
6.9 Check the specific form of filter failure mode.
7 Test result report
The test report should include at least the following.
a) The number of this part of GB/T 8243, namely GB/T 8243.6;
b) the name of the laboratory;
c) Filter type (factory model and lot number);
d) test date;
e) Filter description. new or used (if the latter, should indicate the approximate time of use);
f) initial tightening torque (see 6.1);
g) The customer's specified target pressure value and whether it is achieved (see 6.6);
h) residual tightening torque (see 6.7);
i) Permanent deformation is visible (see 6.7);
j) Burst resistance (see 6.8);
k) Failure mode and failure location.
Explanation.
1---oil tank
2---oil pump;
3 --- pressure sensor;
4 --- test filter;
5---valve;
6 --- pressure regulating valve.
Fig.1 Schematic diagram of static pressure burst test bench
......
|