Powered by Google www.ChineseStandard.net Database: 189759 (21 Apr 2024)

GB/T 6995.1-2008 (GBT6995.1-2008)

GB/T 6995.1-2008_English: PDF (GBT 6995.1-2008, GBT6995.1-2008)
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 6995.1-2008English70 Add to Cart 0--9 seconds. Auto-delivery Markings for electric wires and cables -- Part 1: General requirements Valid GB/T 6995.1-2008

BASIC DATA
Standard ID GB/T 6995.1-2008 (GB/T6995.1-2008)
Description (Translated English) Markings for electric wires and cables - Part 1: General requirements
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard K13
Classification of International Standard 29.060.20
Word Count Estimation 6,620
Date of Issue 2008-06-18
Date of Implementation 2009-03-01
Older Standard (superseded by this standard) GB 6995.1-1986
Quoted Standard GB/T 6995.2-2008; GB/T 6995.3-2008; GB/T 6995.4-2008; GB/T 6995.5-2008
Drafting Organization Shanghai Electric Cable Research Institute
Administrative Organization National Standardization Technical Committee of wire and cable
Regulation (derived from) Announcement of Newly Approved National Standards No. 10 of 2008 (total 123)
Proposing organization China Electrical Appliances Industry Association
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, China National Standardization Administration Committee
Summary This standard applies to electrical equipment, wire and cable, power cables and communication cables and other cables and insulated core identification. This part should GB/T 6995 in Part 2, Part 3, Part 4 and Part 5 together.

Standards related to: GB/T 6995.1-2008

GB/T 6995.1-2008
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 29.060.20
K 13
Replacing GB 6995.1-1986
Markings for Electric Wires and Cables -
Part 1. General Requirements
ISSUED ON. JUNE 18, 2008
IMPLEMENTED ON. MARCH 1, 2009
Issued by.
General Administration of Quality Supervision, Inspection
and Quarantine of the People’s Republic of China;
Standardization Administration of the People's Republic of
China.
Table of Contents
Foreword ... 3 
1 Scope ... 5 
2 Normative references ... 5 
3 Definitions ... 5 
4 Requirements for colour and number identification ... 6 
5 Printed marking ... 7 
6 Marking line or marking strip ... 7 
7 Test methods ... 8 
Foreword
GB/T 6995 " Markings for electric wires and cables" is divided into five parts.
- Part 1. General requirements;
- Part 2. Standard colours;
- Part 3. Identifications of cables and wires;
- Part 4. Identifications of insulated conductors of cables and wires for electrical
appliances and equipments;
- Part 5. Identifications of insulated cores of power cables.
This Part is part 1 of GB/T 6995.
This Part replaces GB 6995.1-1986 “Markings for electric cables and wires - Part 1.
General requirements”.
Compared with GB 6995.1-1986, the main changes of this Part are as follows.
- Delete the chapter “Objective” deleted (Chapter 2 of previous edition);
- Add the chapter “Normative References” (see Chapter 2);
- The chapter headline of “General Requirements” is modified to “Requirements for
colour and number identification” (Chapter 4 of previous edition; Chapter 4 of this
edition);
- Adjust the chapter and clause numbers of “Coining Markings” (4.3 of previous
edition; 5.2 of this edition);
- Adjust the chapter and clause numbers of “Marking line or marking strip” (4.4 of
previous edition; Chapter 6 of this edition);
- Add the relevant content of insulated core colour identification (4.1.1 of this edition);
- Add the chapter “Printed Marks” (see Chapter 5);
- Add the relevant content of ink printed marking (5.1 of this edition);
- Add the relevant content of laser printed marking (5.3 of this edition);
- Adjust the chapter and clause numbers of “Test method” (Chapter 5 of previous
edition; Chapter 7 of this edition).
Markings for Electric Wires and Cables -
Part 1. General Requirements
1 Scope
This Part of GB/T 6995 is applicable to the identification markings for electrical
appliance and equipment wires/cables, electric cables and telecommunication cables,
etc., as well as the insulated cores.
This Part shall be used together with Part 2, Part 3, Part 4 and Part 5 of GB/T 6995.
2 Normative references
The following documents contain the provisions which, through reference in this Part
of GB/T 6995, become the provisions of this Standard. For dated references, their
subsequent amendments (excluding corrigendum) or revisions do not apply to this
Standard. However, the parties who enter into agreement based on this Standard are
encouraged to investigate whether the latest versions of these documents are
applicable. For undated reference documents, the latest versions apply to this Part.
GB/T 6995.2-2008 Markings for electric wires and cables – Part 2. Standard colours
GB/T 6995.3-2008 Markings for Electric Wires and Cables - Part 3. Identifications
of Cables and Wires
GB/T 6995.4-2008 Markings for Electric Wires and Cables - Part 4. Identifications
of Insulated Conductors of Cables and Wires for Electrical Appliances and
Equipments
GB/T 6995.5-2008 Markings for Electric Wires and Cables - Part 5. Identifications
of Insulated Cores of Power Cables
3 Definitions
For the purposes of this Part, the following definitions apply.
3.1 Wire and Cable Identification
The manufacturer, product trademark, model, specification and function, etc. are
identified with markings such as word, letter, symbol and colour.
6.1.2 Marking strip
It refers to the strip on which word, letter or symbol, etc. are printed; it indicates
information such as the wires and cables’ manufacture, product voltage grade, model,
specification and trademark.
6.1.3 Clarity
Colour of the entire marking line shall be the same. The boundary of two colours within
the mixed-colour shall be guaranteed to be clear. The colour of marking line and the
marking on the marking strip shall be clear and legible.
6.1.4 Fastness
The marking colour shall remain the same when being cleaned with gasoline or other
suitable solvent.
7 Test methods
7.1 The clarity of marking shall be checked by eyes; where the surface of test sample
is contaminated and beyond recognition, it can be scrubbed with cotton fabric
immersed in the gasoline or other appropriate solvent; or the clarity can be checked
by cutting sample with clean blade.
7.2 The rubbing resistance of the marking shall be checked by eyes after the marking
is scrubbed for 10 times with absorbent cotton or cotton cloth immersed in water.
...