GB/T 6503-2017 PDF English
US$175.00 · In stock · Download in 9 secondsGB/T 6503-2017: Man-Made Fibers - Test Method of Moisture Regain Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 6503: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 6503-2017 | English | 175 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Man-Made Fibers - Test Method of Moisture Regain
| Valid |
| GB/T 6503-2008 | English | 439 |
Add to Cart
|
3 days
|
Testing method for moisture regain of man-made fibres
| Obsolete |
| GB/T 6503-2001 | English | 239 |
Add to Cart
|
2 days
|
Test method for moisture regain in synthetic filament yarns
| Obsolete |
| GB/T 6503-1986 | English | RFQ |
ASK
|
3 days
|
Standard test method for moisture regain in synthetic filament and textured yarns by oven-drying
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 6503-2017
GB/T 6503-2017: Man-Made Fibers - Test Method of Moisture Regain---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT6503-2017
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 59.060.20
W 50
Replacing GB/T 6503-2008
Man-Made Fibers - Test Method of Moisture Regain
Issued on. DECEMBER 29, 2017
Implemented on. JULY 01, 2018
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of PRC.
Table of Contents
Foreword... 3
1 Scope... 5
2 Normative References... 5
3 Terms and Definitions... 5
4 Principle... 6
5 Apparatus... 6
6 General Rules of Test... 7
7 Test Procedures... 8
8 Result Calculation... 10
9 Test Report... 10
Appendix A (Normative) Correction of Mass after Baking under Non-Standard
Atmosphere... 12
Appendix B (Informative) Infrared (or Halogen) Moisture Analyzer Method... 14
Foreword
This Standard was drafted as per the rules specified in GB/T 1.1-2009.
This Standard replaced GB/T 6503-2008 Testing Method for Moisture Regain of Man-
Made Fibers; compared with GB/T 6503-2008, this Standard has the major technical
changes as follows.
--- Modify the scope of the standard (see Clause 1 of this Edition; Clause 1 of Edition
2008);
--- Adjust the normative references (see Clause 2 of this Edition; Clause 2 of Edition
2008);
--- Delete the definition of “moisture content”; modify the definition of “constant mass”
(see Clause 3 of this Edition; Clause 3 of Edition 2008);
--- Modify the principle (see Clause 4 of this Edition; Clause 4 of Edition 2008);
--- Add the ventilated oven that can be used for cold weighting, and oven ventilation
rate (see 5.1 of this Edition; 5.1 of Edition 2008);
--- Modify the general rules of test (see Clause 6 of this Edition; Clause 6 of Edition
2008);
--- Adjust Table 2 (see Clause 7 of this Edition; Clause 7 of Edition 2008);
--- Delete “baking basket needs to be calibrated mass at 105°C~110°C, and subject
to this” (see 7.1.3 of this Edition; 7.1.3 of Edition 2008);
--- Delete the requirements specified in the product standards for implementing
Appendix A (see Appendix A of this Edition; Appendix A of Edition 2008);
--- Modify the Value a in the Appendix A (see Table A.1 of this Edition; and Table A.1
of Edition 2008);
--- Adjust the instrument specifications in Appendix B (see B.3.1 of this Edition; and
B.3.1 of Edition 2008);
--- Add heating temperature of dacron (DTY) in Appendix B (see B.5.4 of this Edition;
B.5.4 of Edition 2008).
This Standard was proposed by China National Textile and Apparel Council.
This Standard shall be under the jurisdiction of Shanghai Textile Industry Institute of
Technical Supervision.
Drafting organizations of this Standard. Shanghai Textile Industry Institute of Technical
Supervision, Xiamen Xianglu Chemical Fiber Co., Ltd., Huafon Spandex Co., Ltd.,
Hengtian Hailong (Weifang) New Materials Limited Liability Company, Guangdong
Xinhui Meida Nylon Co., Ltd., Sinopec Yizheng Chemical Fiber Company Limited,
Suzhou Longjie Speical Fiber Co., Ltd., Shandong Yinying Chemical Fiber Co., Ltd.,
Tongkun Group Co., Ltd., Hubei Golden Ring New Materials Tech Ltd., Jiangsu
Haiyang Chemical Fiber Co., Ltd., Friends of Tangshan Group Xingda Chemical Fiber
Co., Ltd., Jiangyin Qiangli Chemical Fiber Co., Ltd., Shanghai Huafon Microfiber Co.,
Ltd., Fujian Minrui Environmental Fiber Joint Stock Co., Ltd., and China Chemical
Fibers Association.
Chief drafting staffs of this Standard. Zhou Zhende, Wang Lili, Guo Wenbo, Liu
Shanshan, Ge Hong, Li Rongjiang, He Rong, He Xiaolin, Fang Zongfang, Feng Yin,
He Liangcheng, Ji Zengming, Zheng Fujie, Liu Guo, Duan Weidong, Guo Ronghai,
and Zheng Shiying.
The historical editions replaced by this Standard are as follows.
--- GB/T 6503-1986, GB/T 6503-2001, GB/T 6503-2008;
--- GB/T 14341-1993.
Man-Made Fibers - Test Method of Moisture Regain
1 Scope
This Standard specifies the test method for moisture regain of man-made fiber, namely,
oven weighting method and cold weighting method.
This Standard is applicable to the man-made fiber.
2 Normative References
The following documents are essential to the application of this document. For the
dated documents, only the versions with the dates indicated are applicable to this
document; for the undated documents, only the latest version (including all the
amendments) are applicable to this document.
GB/T 4146 (all parts) Textiles – Man-Made Fibers
GB/T 6502 Sampling Method of Man-Made Filament Yarns
3 Terms and Definitions
The following terms and definitions and those ones stipulated in GB/T 4146 (all parts)
are applicable to this document.
3.1 Constant mass
The specimen is treated and separated for a certain time; then the difference of two
weightings before and after treatment doesn’t exceed the specified range.
3.2 Oven weighting
Bake the specimen to remove moisture within the oven; then use the balance attached
to the oven to weigh the specimen mass within the oven.
4 Principle
Place the specimen into the oven with specified temperature, bake it and remove the
moisture to the constant mass;
5 Apparatus
5.1 Oven
The oven weighting adopts the ventilated oven attached with weighing device in the
oven; the oven temperature accuracy is ±3°C.
5.2 Balance
The balance shall meet the following requirements.
5.3 Sample container
It is used for holding specimen, it shall be sealed and don’t absorb moisture.
5.4 Weighing box
It is used for cold weighting, with good airtightness and known mass.
6 General Rules of Test
6.1 Extraction of sample in laboratory
6.1.1 The sampling of staple fiber shall be as specified in GB/T 14334.
6.1.2 The sampling of filament shall be as specified in GB/T 6502.The laboratory
sample is combined and twisted, then cut the specimen.
6.2 Specimen quantity
Sampling 2 specimens from each batch of samples, then take the parallel test.
6.3 Test requirements
6.3.1 Moisture regain test
6.3.2 Standard moisture regain test
6.3.2.1 Provisions
The specimen is preconditioned (if necessary), conditioned; the weighing outside the
oven shall be implemented under standard atmosphere. If the atmosphere entering
into the oven is non-standard atmosphere, then the mass after baking shall be
corrected as per Appendix A.
6.3.2.3 Standard atmosphere for conditioning and test
6.3.2.3.1 For the fiber with conventional moisture regain less than 4.5%, the standard
atmosphere for conditioning and test. temperature of (20±2)°C, relative humidity
(65±5)%.
6.3.2.3.2 For the fiber with conventional moisture regain greater than or equal to
4.5%, the standard atmosphere for conditioning and test. temperature of (20±2)°C,
relative humidity (65±3)%.
7 Test Procedures
7.1 Oven weighting method (arbitration method)
7.1.1 Take 50g of specimen, accurate to 0.01g, record it as the mass before baking.
7.1.2 The oven thermometer was adjusted to the desired controlled drying
temperature (see Table 2).
7.1.3 Place the specimen into the basket of the oven, wait until the temperature in
the oven rises to the specified temperature, record the time; after baking to the drying
time (see Table 2), begin to weigh; weighing once every 10 minutes; bake to the
constant mass, record the mass of the last weighing as the mass after baking.
7.2 Cold weighting method
7.2.1 Take about 10g of specimen, put into the weighing box to weigh together,
accurate to 0.001g.
7.3 Infrared (or halogen) moisture analyzer method
The infrared (or halogen) moisture analyzer method can refer to Appendix B; this
Dacron, chinlon, vinylon, polyphenylene sulphide,
8 Result Calculation
8.1 Moisture content shall be calculated as per Formula (1).
8.3 Take the arithmetic average of the two specimens to represent the moisture
content and moisture regain of such batch of samples.
8.4 The test data shall be rounded off to 2 digits after the decimal point.
9 Test Report
The test report shall contain the following contents.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 6503-2017 be delivered?Answer: The full copy PDF of English version of GB/T 6503-2017 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 6503-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 6503-2017_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 6503-2017 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 6503-2017?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 6503-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 6503-2017?A step-by-step guide to download PDF of GB/T 6503-2017_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 6503-2017".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|