HOME   Cart(0)   Quotation   About-Us Tax PDFs Standard-List Powered by Google www.ChineseStandard.net Database: 189760 (8 Feb 2025)

GB/T 6096-2020 English PDF (GB/T 6096-2009, GB/T 6096-1985)

GB/T 6096-2020_English: PDF (GB/T6096-2020)
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 6096-2020English235 Add to Cart 0--9 seconds. Auto-delivery Fall protection. Performance test methods for fall protection systems Valid GB/T 6096-2020
GB/T 6096-2009English759 Add to Cart 4 days [Need to translate] Test method for personal fall protection systems Obsolete GB/T 6096-2009
GB/T 6096-1985English399 Add to Cart 3 days [Need to translate] Inspect and examine method for safety belts Obsolete GB/T 6096-1985


BASIC DATA
Standard ID GB/T 6096-2020 (GB/T6096-2020)
Description (Translated English) Fall protection. Performance test methods for fall protection systems
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard C73
Classification of International Standard 13.340.99
Word Count Estimation 14,129
Date of Issue 2020-11-19
Date of Implementation 2021-06-01
Older Standard (superseded by this standard) GB/T 6096-2009
Quoted Standard GB 8965.1-2020; GB/T 10125; GB 12014-2019; GB 24540-2009
Drafting Organization Beijing Labor Protection Research Institute, Mei Si'an (China) Safety Equipment Co., Ltd., Ningbo Tianhong Electric Appliance Co., Ltd., Jiangsu Manjieke Co., Ltd.
Administrative Organization National Standardization Technical Committee for Personal Protective Equipment (SAC/TC 112)
Regulation (derived from) National Standard Announcement No. 26 of 2020
Proposing organization Ministry of Emergency Management of the People's Republic of China
Issuing agency(ies) State Administration for Market Regulation, National Standardization Administration
Summary This standard specifies the test equipment, test methods, data processing, etc. of safety belts for high-altitude operations. This standard applies to safety belts used for work from heights. This standard does not apply to safety belts used in sports and fire protection industries.

BASIC DATA
Standard ID GB/T 6096-2009 (GB/T6096-2009)
Description (Translated English) Test method for personal fall protection systems
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard C73
Classification of International Standard 13.340.99
Word Count Estimation 19,187
Date of Issue 2009-04-13
Date of Implementation 2009-12-01
Older Standard (superseded by this standard) GB/T 6096-1985
Quoted Standard GB/T 5455-1997; GB 6095-2009; GB/T 10125-1997
Drafting Organization Beijing Research Institute of Labor Protection
Administrative Organization National Technical Committee of Standardization for Personal Protective equipment
Regulation (derived from) National Standard Approval Announcement 2009 No.4 (Total No.144)
Proposing organization State Administration of Work Safety
Issuing agency(ies) Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China; Standardization Administration of China
Summary This standard specifies test methods and test equipment belts. This standard applies to GB 6095-2009 technical requirements specified in seat belts and seat belt.

BASIC DATA
Standard ID GB/T 6096-1985 (GB/T6096-1985)
Description (Translated English) Inspect and examine method for safety belts
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard C73
Classification of International Standard 13.340.20
Word Count Estimation 10,124
Date of Issue 1985/6/11
Date of Implementation 1986/2/1
Regulation (derived from) Announcement of Newly Approved National Standards 2009 No. 4 (No. 144 overall)
Proposing organization Labor and Personnel Department of the People Republic of China
Issuing agency(ies) National Bureau of Standards


GB/T 6096-2020 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 13.340.99 C 73 Replacing GB/T 6096-2009 Fall protection - Performance test methods for fall protection systems ISSUED ON: NOVEMBER 19, 2020 IMPLEMENTED ON: JUNE 01, 2021 Issued by: State Administration for Market Regulation; Standardization Administration of the People's Republic of China. Table of Contents Foreword ... 3 1 Scope ... 5 2 Normative references ... 5 3 Terms and definitions ... 5 4 Test equipment ... 6 5 Test methods ... 8 6 Data processing ... 19 Bibliography ... 20 Fall protection - Performance test methods for fall protection systems 1 Scope This Standard specifies the test equipment, test methods, data processing, etc. for safety belts for working at heights. This Standard applies to safety belts for working at heights. This Standard does not apply to safety belts used in sports or the firefighting industry. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. GB 8965.1-2020, Protective clothing -- Flame retardant protective clothing GB/T 10125, Corrosion tests in artificial atmospheres -- Salt spray tests GB 12014-2019, Protective clothing -- Static protective clothing GB 24540-2009, Protective clothing -- Protective clothing against liquid acids and alkalis 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 force measuring apparatus A test system consisting of a dynamic force sensor, a digital display or chart recorder and a filtering device. 3.2 safety space A three-dimensional space located below the working surface where there are no objects that may cause collision injury to the falling person. 3.3 deploy distance The vertical distance from the test hanging point to the lowest point of the torso dummy 4.2 Test chain The length between the two connection points of the test chain in the suspended state is (2000 ± 25) mm. The chain diameter is not less than 6 mm. 4.3 Test structure 4.3.1 The test structure shall be a rigid structure, which can be integrated with the building structure or an independent frame structure. When the suspension point is subjected to a force of 20 kN, the maximum displacement is less than 1 mm. 4.3.2 The test structure shall be equipped with reserved holes and installation components for installing the safety belts, ensuring that the torso dummy does not collide with the test structure during the test. 4.3.3 The location of the test hanging point shall ensure that the torso dummy does not touch the ground when it is suspended in the air from the start of the test to the completion of the fall. The height shall be at least greater than the safety space specified in the product instructions. 4.3.4 The test structure shall have a lifting function. The relative position between the release point and the test hanging point shall be adjusted according to the test needs. 4.4 Release device The release device shall ensure that the initial velocity of the simulated person is 0 when released, and the person falls in a free fall state. 4.5 Force measuring apparatus 4.5.1 The dynamic force sensor shall have a range of no less than 10 kN and an accuracy of ±2%. 4.5.2 The device response frequency is not less than 1 kHz and is equipped with a filtering device. 4.5.3 The continuous sampling time of the device shall not be less than 20 s. 4.5.4 The device can display the peak impact force within the sampling interval. The resolution shall not be less than 1 N. 4.6 Distance measuring device The range of the distance measuring device shall meet the test requirements. The resolution shall not be less than 1 cm. d) Take a (1000±10) mm lanyard and connect it to the loading device; e) Start the loading device. Apply a load of (15+0.3) kN. Maintain the load for at least 3 min; f) Observe and record the condition of the safety belt after unloading. Measure and record the displacement of the strap in the adjustment buckle. 5.1.3 Safety belt for restricted area with length adjustment The test steps for safety belts with length adjustment devices for restricted area use are as follows: a) Put the straps on the torso dummy according to the instructions. Fix the torso dummy to the test bench; b) Connect the lanyard to the lanyard according to the instruction manual; c) Mark the edges of all adjustment buckles on the laces; d) Connect the adjustment device to the loading device. Make sure the distance between the tie connection point and the loading device is (1000±10) mm; e) Start the loading device. Apply the load to (15+0.3) kN. Maintain the load for at least 3 min; f) Observe and record the condition of the safety belt after unloading. Measure and record the displacement of the strap in the adjustment buckle. NOTE: During the test, if the length adjustment device and the lanyard slip, they can be fixed in an appropriate manner. 5.2 Performance testing of fall protection system for fence operations 5.2.1 Test legend An example of a safety belt test for a perimeter fence operation is shown in Figure 3. 5.2.2 Safety belt for fence work with only strap and lanyard The test steps for a safety belt for fence work with only a strap and a lanyard are as follows: a) Put the strap on the torso dummy according to the instructions. Connect the torso dummy head ring to the release device; b) Connect the lanyard to the hanging points on both sides of the lanyard according to the instruction manual; c) Mark the edges of all adjustment buckles on the laces; d) Connect the midpoint of the lanyard to the test hanging point; e) Lift the torso dummy. Raise the torso dummy to a free fall distance of (1800+50) mm. Make sure the horizontal distance from the release point to the test hanging point is no more than 300 mm. When the free-fall distance is less than 1800 mm, connect the test chain between the test hanging point and the midpoint of the lanyard; f) Release the torso dummy; g) After the torso dummy is stationary, observe and record the condition of the safety belt. Measure and record the displacement of the belt in the adjustment buckle. 5.2.3 Safety belt for fence work with length adjustment device The test steps for the safety belt for fence work with length adjustment device are as follows: a) Put the strap on the torso dummy according to the instructions. Connect the torso dummy head ring to the release device; b) Connect the lanyard to the hanging points on both sides of the lanyard according to the instruction manual; c) Mark the edges of all adjustment buckles on the laces; d) Adjust the length adjustment device. Adjust the lanyard length to (2000±50) mm. If the length is less than 2000 mm, adjust it to the maximum length; e) Connect the midpoint of the lanyard to the test hanging point; f) Lift the torso dummy. Lift the torso dummy to a free-fall distance of (1800+50) mm. Make sure the horizontal distance from the release point to the test hanging point is no more than 300 mm. When the free fall distance is less than 1800 mm, connect the test chain between the test hanging point and the midpoint of the lanyard; g) Release the torso dummy; h) After the torso dummy is stationary, observe and record the condition of the safety belt. Measure and record the displacement of the belt in the adjustment buckle. 300 mm; e) Release the torso dummy. Record the peak impact force of the safety belt while the torso dummy is in suspension; f) After the torso dummy is stationary, observe and record the condition of the safety belt. Measure the deploy distance and record the displacement of the belt in the adjustment buckle; g) Unload and adjust the laces. Re-mark all the adjustment buckle edges of the laces; h) Replace the lanyard and buffer. Connect the lanyard and buffer to the lanyard and test hanging point respectively according to the product instructions. If the length of the lanyard is adjustable, adjust the length of the lanyard to the maximum length; i) Connect the torso dummy hip ring to the release device. Lift the torso dummy hip ring to the same level as the test hanging point. Make sure the horizontal distance between the release point and the test hanging point is no more than 300 mm; j) Release the torso dummy. Record the peak impact force of the safety belt while the torso dummy is in suspension; k) After the torso dummy is stationary, observe and record the condition of the safety belt. Measure the deploy distance and record the displacement of the belt in the adjustment buckle. 5.3.3 Safety belt for fall suspension with lanyard, twin-tail lanyard and buffer The test steps for safety belt for fall suspension containing only a lanyard, a twin-tail lanyard and a buffer are as follows: a) Put the strap on the torso dummy according to the instruction manual. Connect the torso dummy head ring to the release device; b) Connect the common end of the lanyard and the buffer to the lanyard according to the product manual; c) Connect one of the connection points of the twin-tail lanyard to the test hanging point. Connect the other connection point to the tie connection point of the common end of the lanyard. When the two lanyards are of different lengths, select the longest lanyard to connect to the hanging point; d) Lift the torso dummy to a point where the connection point between the harness and the lanyard is (1000+50) mm above the test hanging point. Make sure the horizontal distance from the release point to the test hanging point is no more than 300 mm; 5.3.5 Safety belt for fall suspension with strap and speed differential controller The test steps for a fall suspension safety belt containing only a strap and a speed differential controller are as follows: a) Put the strap on the torso dummy according to the instruction manual. Connect the torso dummy head ring to the release device; b) Connect the speed difference automatic controller to the strap and test hanging point according to the product manual; c) Mark the edges of all adjustment buckles on the strap; d) Lift the torso dummy to the point where the lanyard of the speed differential controller is pulled out (1000+50) mm. Make sure the horizontal distance from the release point to the test hanging point is no more than 300 mm; e) Release the torso dummy. Record the peak impact force of the safety belt while the torso dummy is in suspension; f) After the torso dummy is stationary, observe and record the condition of the safety belt. Measure the deploy distance and record the displacement of the belt in the adjustment buckle; g) Unload and adjust the laces. Re-mark all the adjustment buckle edges of the strap; h) Replace the speed difference controller. Connect the speed difference controller to the strap and test hanging point according to the product manual; i) Connect the torso dummy hip ring to the release device. Lift the torso dummy hip ring to the same level as the test hanging point. Make sure the horizontal distance between the release point and the test hanging point is no more than 300 mm; j) Release the torso dummy. Record the peak impact force of the safety belt while the torso dummy is in suspension; k) After the torso dummy is stationary, observe and record the condition of the safety belt. Measure the deploy distance and record the displacement of the belt in the adjustment buckle. 5 - self-locking device; 6 - rigid guide rail; 7 - flexible guide rail; 8 - torso dummy; 9 - strap; 10 - guide rail fixing device (if any). Figure 6 -- Example of the first impact test of a fall suspension safety belt with a self-locking device 5.4 Rescue performance test of safety belt 5.4.1 Test legend An example of testing a safety belt with a rescue function is shown in Figure 7. 5.4.2 Safety belt with rescue function The test steps for safety belts with rescue function are as follows: a) Put the strap on the torso dummy according to the instruction manual. Connect the torso dummy head ring to the release device; b) Connect the test chain to the strap rescue hanging point according to the instruction manual; c) Mark the edges of all adjustment buckles on the strap; d) Connect the other end of the test chain to the hanging point; e) Lift the torso dummy. Raise the connection point between the lanyard and the harness to the free fall distance of (600+50) mm. Make sure the horizontal distance from the release point to the test hanging point is no more than 300 mm; f) Release the torso dummy; g) After the torso dummy is stationary, observe and record the condition of the safety belt. Measure and record the displacement of the belt in the adjustment buckle. ......


GB/T 6096-2009 Test method for personal fall protection systems ICS 13.340.99 C73 National Standards of People's Republic of China Replacing GB/T 6096-1985 Belt test methods Posted 2009-04-13 2009-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Foreword This standard replaces GB/T 6096-1985 "Test Method seat belt." This standard and GB/T 6096-1985 compared to the main changes are as follows. --- Increased manikin dressed testing methods; --- Increasing the salt spray test method; --- Increased job safety belt around the pole slip test methods; --- Increasing the overall area limiting seat belt static and dynamic load test method; --- Increasing the overall seat belt hanging falling static load test method; --- Increasing the test method using an acceleration sensor; --- Increased testing legend; --- Added Appendix A; --- Added Appendix B. This standard Annex A, Annex B is normative appendix. This standard was proposed by the State Administration of Work Safety. The standard personal protective equipment by the National Standardization Technical Committee (SAC/TC112) centralized. This standard is drafted by. Beijing Labor Protection Institute of Science. Participated in the drafting of this standard. Sperian (China) Safety Equipment Co., Ltd. Taizhou City Huatai labor supplies, Music Qing City, east China Security Equipment Factory, Jiangsu Man Jieke Limited. The main drafters of this standard. Yang Wenfen, Xiao Yiqing, Zanglan Lan, Lu Bing, Chen Cho was, Tang Po-lift, chapter Cummins, Bob this. This standard replaces the previous version of the standard release of case. --- GB 6096-1965, GB/T 6096-1985. Belt test methods 1 Scope This standard specifies the test methods and test equipment belt. This standard applies to GB 6095-2009 in technical requirements belts and seat belt. 2 Normative references The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 5455-1997 Textiles - Burning behavior - Vertical method GB 6095-2009 belts GB/T 10125-1997 Corrosion tests in artificial atmospheres - salt spray test 3 Terms and Definitions The following terms and definitions apply to this standard. 3.1 In the test with only a single seat belt tied at the waist belt, there is a simple shape to reduce the cost of heavy use. Test Method 4 4.1 Wear test Sims This standard will be specified in Appendix A Sims suspended from the hanger. Put on the seat belt in a simulated human body, adjusting the moving parts, so Lacing with simulated human torso fit to change the suspension point lace, observe whether there should not be prescribed in 5.1.1.4 of GB 6095-2009 defect. 4.2 main belt, safety rope static load test 4.2.1 Test Equipment Universal testing machine. range of less than 50kN; precision level 1. Fixture. a) Ribbon static load test fixture and holding method shown in Figure 1. Millimeters 1 --- slider; 2 --- Test transects; 3 --- clamps. Figure 1 Ribbon static load test fixture and holding method schematic ......

Similar standards: GB 6095-2021  GB/T 6568-2024  
Similar PDFs (Auto-delivered in 9 seconds): GB/T 6096-2020  GB 8965.1-2020  GB 8965.4-2022  GB 2890-2022