GB/T 5713-2013 (GB/T5713-2013, GBT 5713-2013, GBT5713-2013)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 5713-2013 | English | 70 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Textiles -- Tests for colour fastness -- Colour fastness to water
| Valid |
GB/T 5713-2013
|
| GB/T 5713-1997 | English | 70 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Textiles--Tests for colour fastness--Colour fastness to water
| Obsolete |
GB/T 5713-1997
|
| GB/T 5713-1985 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Textiles--Testing method for colour fastness to water
| Obsolete |
GB/T 5713-1985
|
Preview PDF: GB/T 5713-2013
| Standard ID | GB/T 5713-2013 (GB/T5713-2013) | | Description (Translated English) | Textiles - Tests for colour fastness - Colour fastness to water | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | W04 | | Classification of International Standard | 59.080.01 | | Word Count Estimation | 7,713 | | Older Standard (superseded by this standard) | GB/T 5713-1997 | | Quoted Standard | GB/T 250; GB/T 251; GB/T 6151; GB/T 6682; GB/T 7568.1; GB/T 7568.2; GB/T 7568.3; GB/T 7568.4; GB/T 7568.5; GB/T 7568.6; GB/T 7568.7; GB/T 13765; FZ/T 01023; FZ/T 01024 | | Adopted Standard | ISO 105-E01-2013, MOD | | Drafting Organization | Textile Institute of Industrial Standardization | | Administrative Organization | Standards-based National Textile Technical Committee of Standardization Technical Committee | | Regulation (derived from) | National Standards Bulletin No. 25 of 2013 | | Proposing organization | China Textile Industry Federation | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the method for determining the color of the water impregnation capacity of all types of textiles. |
GB/T 5713-2013
GB
ICS 59. 080. 01
W 04
NATIONAL STANDARD
OF THE PEOPLE'S REPUBLIC OF CHINA
Replacing GB/T 5713-1997
Textiles - Tests for Colour Fastness –
Colour Fastness to Water
(ISO 105-E01.2013, MOD)
ISSUED ON. DECEMBER 17, 2013
IMPLEMENTED ON. OCTOBER 15, 2014
Jointly Issued by. General Administration of Quality Supervision,
Inspection and Quarantine (AQSIQ);
Standardization Administration (SAC) of the People's
Republic of China.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative References... 5
3 Principle ... 6
4 Apparatus ... 6
5 Reagents ... 7
6 Test Specimen ... 8
7 Operating Procedure ... 8
8 Test Report ... 9
Foreword
This Standard is drafted according to the rules specified in GB/T 1.1-2009.
This Standard replaces GB/T 5713-1997 "Textiles — Tests for colour fastness —
Colour fastness to water". Compared with GB/T 5713-1997, the main changes in this
Standard are as follows.
— In Chapter 2 "Normative References", replace the obsolete standards GB 7564 -
7568-1987 and GB 11404-1989 with GB/T 7568.1 - 7568.7; add GB/T 6682,
GB/T 13765, FZ/T 01023 and FZ/T 01024; GB/T 6151 is changed into undated
reference;
— Chapter 4 of the original standard is divided into 2 chapters - Chapter 4
"Apparatus " and Chapter 5 "Reagents";
— In 4.1, add the provision - a pressure of (12.5 ± 0.9) kPa can be applied by the
test device on test specimens;
— In 4.3, reference of adjacent fabrics reference standard is changed from
"according to 8.2 of GB/T 6151-1997" into "see GB/T 6151";
— In Table 1 of 4.3.2, single-fibre adjacent fabrics of cellulose acetate and
cellulose triacetate are deleted;
— In 4.3.2, add "Note. Other types of fibres may be referred to homogeneous or
similar fibres";
— In Chapter 4, add spectrophotometer (4.6), analytical balance (4.7) and a set of
11 glass or acrylic resin plates (4.8);
— In Chapter 6, test specimen size is changed into (40 ± 2) mm × (100 ± 2) mm;
— In 7.1, specify the composite specimen liquor ratio of 50.1 and thoroughly wet
for 30 min;
— In the note of 7.1, add "If less than 10 specimens are prepared, all 11 plates
must still be used to maintain the correct nominal pressure";
— In 7.2, position of the test specimens is changed into the horizontal position or
the vertical position, depending on the type of device available;
— In 7.4, add the optional assessment method for the change in colour of each
specimen or the staining of adjacent fabric(s) instrumentally;
— In Chapter 8, add item f); and add instrumental assessment result and rating
method explanation in item c).
Adopting re-drafting method, this Standard modifies and adopts ISO 105-E01.2013
"Textiles — Tests for colour fastness — Part E01. Colour fastness to water" (English
edition). Compared with ISO 105-E01.2013, the main differences in this Standard are
as follows.
— Foreword of the international standard is deleted;
— International standards in Chapter 2 "Normative References" are replaced by
the corresponding national standards and industry standards of China; GB/T
13765 is added;
— Add standard adjacent fabric hemp in Table 1 of 4.3.2;
— In 4.3.2, add "Note. Other types of fibres may be referred to homogeneous or
similar fibres".
This Standard was proposed by China National Textile and Apparel Council.
This Standard shall be under the jurisdiction of the Basic Standard Subcommittee of
Technical Committee 209 on Textiles of Standardization Administration of China
(SAC/TC 209/SC 1).
Chief drafting organizations of this Standard. Standardization Research Institute of
Textile Industry, Shanghai Textile Industry Institute of Technical Supervision, and
Shanghai Wool & Jute Textile Research Institute.
Chief drafting staffs of this Standard. Liu Lin, Chen Xiaocheng, and Zhu Jie.
The historical editions replaced by this Standard are as follows.
— GB/T 5713-1985, GB/T 5713-1997.
Textiles - Tests for Colour Fastness –
Colour Fastness to Water
1 Scope
This Standard specifies a method for determining the colour fastness to water of the
colour of all kinds of textiles.
2 Normative References
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments)
applies.
GB/T 250 Textiles -— Tests for colour fastness — Grey scale for assessing
change in colour (GB/T 250-2008, ISO 105-A02.1993, IDT)
GB/T 251 Textiles — Tests for colour fastness — Grey scale for assessing
staining (GB/T 251-2008, ISO 105-A03.1993, IDT)
GB/T 6151 Textiles-Tests for colour fastness — General principle of testing (GB/T
6151-1997, eqv ISO 105-AOl.1994)
GB/T 6682 Water for analytical laboratory use — Specification and test methods
(GB/T 6682-2008, ISO 3696.1987, MOD)
GB/T 7568.1 Textiles — Tests for colour fastness — Specification for wool
adjacent fabric (GB/T 7568.1-2002, ISO 105-F01.2001, MOD)
GB/T 7568.2 Textiles — Tests for colour fastness — Standard adjacent fabrics —
Part 2. Cotton and viscose (GB/T 7568.2-2008, ISO 105-F02.2008, MOD)
GB/T 7568.3 Textiles — Tests for colour fastness — Standard adjacent fabrics —
Part 3. Polyamide (GB/T 7568.3-2008, ISO 105-F03.2001, MOD)
GB/T 7568.4 Textiles — Tests for colour fastness — Specification for polyester
adjacent fabric (GB/T 7568.4-2002, ISO 105-F04.2001, MOD)
GB/T 7568.5 Textiles — Tests for colour fastness — Specification for acrylic
adjacent fabric (GB/T 7568.5-2002, ISO 105-F05.2001, MOD)
d) if single-fibre adjacent fabrics were used, the numerical grey scale rating and/or
instrument assessment for staining of each kind of adjacent fabric used;
e) if a multifibre adjacent fabric was used, the numerical grey scale rating and/or
instrumental assessment for staining of each type of fibre in the multifibre
adjacent fabric, and the type of multifibre adjacent fabric used;
f) any deviation, by agreement or otherwise, from the procedure specified in this
Standard.
......
|