GB/T 5494-2019 PDF English
US$130.00 · In stock · Download in 9 secondsGB/T 5494-2019: Inspection of grain and oils - Determination of foreign matter and unsound kernels of grain and oilseeds Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 5494: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 5494-2019 | English | 130 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Inspection of grain and oils - Determination of foreign matter and unsound kernels of grain and oilseeds
| Valid |
| GB/T 5494-2008 | English | 90 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Inspection of grain and oils -- Determination of foreign matter and unsound kernels of grain and oilseeds
| Obsolete |
| GB/T 5494-1985 | English | 199 |
Add to Cart
|
2 days
|
Inspection of grain and oilseeds--Methods for determination of foreign matter and unsound kernels
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 5494-2019
GB/T 5494-2019: Inspection of grain and oils - Determination of foreign matter and unsound kernels of grain and oilseeds
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT5494-2019
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 67.040
X 04
Replacing GB/T 5494-2008
Inspection of grain and oils - Determination of foreign
matter and unsound kernels of grain and oilseeds
Issued on. MAY 10, 2019
Implemented on. DECEMBER 01, 2019
Issued by. State Administration for Market Regulation;
Standardization Administration of the PRC.
Table of Contents
Foreword... 3
1 Scope... 4
2 Normative references... 4
3 Instruments and utensils... 4
4 Lighting requirements... 5
5 Sample preparation... 5
6 Operation steps... 5
7 Result calculation... 7
Appendix A (Normative) Specification of sieve layer used for sieving samples
... 11
Foreword
This Standard is drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard replaces GB/T 5494-2008 “Inspection of grain and oils -
Determination of foreign matter and unsound kernels of grain and oilseeds”.
As compared with GB/T 5494-2008, the main technical changes of this
Standard are as follows.
- Modify the table for provisions on inspection sample mass (see Table 1;
Table 1 of the 2008 edition);
- ADD the operation steps and calculation formula for the inspection of millet
grain in millet (see 6.2.1, 7.2.3);
- Modify the calculation formula for unsound kernels of rice (see 7.2.4; 7.2.6
of the 2008 edition);
- Delete the operation steps and calculation formulas for inspection of shelled
barnyard millet and rice grain (see 6.2.2, 7.2.4, 7.2.5 of the 2008 edition);
- ADD provisions for specification of sieve layer during operation (see
Appendix A).
This Standard was proposed by National Food and Strategic Reserves
Administration.
This Standard shall be under the jurisdiction of National Technical Committee
270 on Grain and Oils of Standardization Administration of China (SAC/TC 270).
Drafting organizations of this Standard. Henan Grain, Oil and Feed Products
Quality Supervision and Inspection Center, Standards and Quality Center of the
State Administration of Grain, Henan Food Science Research Institute Co., Ltd.,
Zhengzhou Food Science Institute, Liaoning Grain Reserves Co., Ltd., China
Grain Wuhan Scientific Research & Design Institute, Co., Ltd.
Main drafters of this Standard. Yin Chenghua, Sun Weiwei, Li Min, Zhang Yan,
Huang Changjun, Cui Yang, Hu Jipeng, Wang Lili, Chen Yin, Niu Mengyu.
The previous editions of the standard replaced by this Standard were released
as follows.
- GB/T 5494-1985, GB/T 5494-2008.
Inspection of grain and oils - Determination of foreign
matter and unsound kernels of grain and oilseeds
1 Scope
This Standard specifies the instruments and utensils, lighting requirements,
sample preparation, operation steps, and result calculation, etc. for the
determination of content of foreign matter and unsound kernels of grain and
oilseeds.
This Standard applies to the determination of content of foreign matter and
unsound kernels of grain and oilseeds.
2 Normative references
The following documents are indispensable for the application of this document.
For the dated references, only the editions with the dates indicated are
applicable to this document. For the undated references, the latest edition
(including all the amendments) are applicable to this document.
GB/T 5491 Inspection of grain and oilseeds - Methods for sampling and
sample reduction
GB/T 22505 Inspection of grain and oils - Sensory analysis environment -
Lighting
3 Instruments and utensils
3.1 Balance. Sensitivity is 0.01 g, 0.1 g, 1 g.
3.2 Grain sieve.
3.3 Electromagnetic sieve shaker.
3.4 Sample splitter or sample splitting plate.
3.5 Analysis tray, tweezers, etc.
4 Lighting requirements
The lighting conditions during operation shall comply with the requirements of
GB/T 22505.
5 Sample preparation
The sample for inspecting foreign matter is divided into two types. large sample
and small sample. The large sample is used to inspect foreign matter in the
large sample, including large foreign matter on the upper sieve and undersize
of the lower sieve.
6 Operation steps
6.1 Inspection of foreign matter and unsound kernels of grain and
oilseeds (except rice)
6.1.1 Sieving
6.1.1.1 Electromagnetic sieve shaker method. SET the sieve layer as specified
in Appendix A (The large-pore sieve is on the top; the small-pore sieve is on the
bottom; the sieve bottom is placed). According to the provisions, TAKE the
sample and put it on the upper sieve; COVER it with a sieve cover. PLACE it
on the electromagnetic sieve shaker; TURN on the power; TURN on the switch.
The sieve automatically sieves to left and to right for 1 min respectively (110
r/min~120 r/min).
6.1.1.2 Hand-sieve method. According to the method in 6.1.1.1, SET the sieve
layer; POUR the sample into it; COVER it with a sieve cover. Then PLACE the
sieve on a glass plate or a smooth tabletop; USE both hands, at a speed of 110
times/min~120 times/min, to sieve for 1 min in a clockwise direction and a
counter-clockwise direction respectively. The sieving range is controlled at
sieve diameter enlarged by 8 cm~10 cm. The operation after sieving is the same
as that in 6.1.1.1.
6.1.2 Inspection of foreign matter of large sample
From the average sample, according to the provisions of Clause 5, SPLIT and
take the sample to the large sample mass (m) specified in Table 1, accurate to 1 g.
6.1.3 Inspection of foreign matter of small sample
From the samples which have been inspected for foreign matter of large sample,
according to the provisions of Clause 5, SPLIT and take the sample to the small
sample mass (m2) specified in Table 1.When the small sample mass is not
more than 100 g, it is accurate to 0.01 g. When the small sample mass is more
than 100 g, it is accurate to 0.1 g. POUR it into the analysis tray; according to
the mass standards, PICK up foreign matters and weigh (m3), accurate to 0.01 g.
6.1.4 Mineral inspection
From the foreign matters of small sample picked, PICK up the minerals and
weigh (m4), accurate to 0.01 g.
6.1.5 Inspection of unsound kernels
While inspecting the foreign matter of small sample, according to the mass
standards, PICK up unsound kernels and weigh (m5), accurate to 0.01 g.
6.2 Inspection of foreign matter and unsound kernels of rice
6.2.1 Inspection of foreign matter
According to the provisions of Clause 5, SPLIT and take about 200 g (m′) of
sample, accurate to 0.1 g. PUT it twice into a circular sieve with a diameter of
1.0 mm. According to the sieving method specified in 6.1.1, carry out the sieving.
After sieving, TAP the sieve to drop the rice bran powder into the sieve bottom.
After all the samples have been sieved, the rice bran powder remaining on the
sieve layer is brushed, combined, and weighed (m1′), accurate to 0.01 g. POUR
the oversize into the analysis tray (The particles stuck in the middle of sieve
pore belong to oversize).
6.2.2 Inspection of unsound kernels
According to the provisions of Clause 5, SPLIT and take the sample to the small
sample mass (m5′) specified in Table 1 (The small sample amount of rice is the
same as that of unprocessed grain), accurate to 0.01 g.
7 Result calculation
7.1 Calculation of inspection results of foreign matter and unsound
kernels of grain and oilseeds (except rice)
7.1.1 The foreign matter content (w1) of large sample is expressed in mass
fraction (%) and is calculated according to formula (1).
7.1.2 The foreign matter content (w2) of small sample is expressed in mass
fraction (%) and is calculated according to formula (2).
7.1.5 The unsound kernel (w5) is expressed in mass fraction (%) and is
calculated according to formula (5).
7.2 Calculation of inspection results of foreign matter and unsound
kernels of rice
7.2.1 The mineral or inorganic foreign matter content (w6) is expressed in mass
fraction (%) and is calculated according to formula (6).
7.2.2 The total amount of foreign matter (w7) is expressed in mass fraction (%)
and is calculated according to formula (7).
7.2.3 The millet grain content (w8) in millet is expressed in mass fraction (%)
and is calculated according to formula (8).
7.2.4 The unsound kernel content (w9) is expressed in mass fraction (%) and is
calculated according to formula (9).
Appendix A
(Normative)
Specification of sieve layer used for sieving samples
The specification of sieve layer used for sieving different grain and oilseed
samples is selected according to the provisions of Table A.1.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 5494-2019 be delivered?Answer: The full copy PDF of English version of GB/T 5494-2019 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 5494-2019_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 5494-2019_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 5494-2019 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 5494-2019?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 5494-2019 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 5494-2019?A step-by-step guide to download PDF of GB/T 5494-2019_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 5494-2019".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|