GB/T 521-2023_English: PDF (GB/T521-2023)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 521-2023 | English | 125 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Test methods for measuring peripheral dimensions of tyres
| Valid |
GB/T 521-2023
|
| GB/T 521-2012 | English | 70 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
Test method of measuring peripheral dimensions for tyres
| Obsolete |
GB/T 521-2012
|
| GB/T 521-2003 | English | 239 |
Add to Cart
|
2 days [Need to translate]
|
Test method of measuring peripheral dimensions for tyres
| Obsolete |
GB/T 521-2003
|
| GB/T 521-1993 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Test method of measuring peripheral dimensions for tyres
| Obsolete |
GB/T 521-1993
|
| Standard ID | GB/T 521-2023 (GB/T521-2023) | | Description (Translated English) | Test methods for measuring peripheral dimensions of tyres | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G41 | | Classification of International Standard | 83.160.01 | | Word Count Estimation | 8,834 | | Date of Issue | 2023-03-17 | | Date of Implementation | 2023-10-01 | | Older Standard (superseded by this standard) | GB/T 521-2012 | | Drafting Organization | Triangle Tire Co., Ltd., Shandong Linglong Tire Co., Ltd., Prinx Chengshan (Shandong) Tire Co., Ltd., Sailun Group Co., Ltd., Zhongce Rubber Group Co., Ltd., Beijing Rubber Industry Research and Design Institute Co., Ltd., Qingdao Sentury Tire Co., Ltd., Sichuan Tire & Rubber (Group) Co., Ltd., Double Star Group Co., Ltd., Double Money Tire Group Co., Ltd., Guizhou Tire Co., Ltd., Shandong Changfeng Tire Co., Ltd., Xiamen Zhengxin Rubber Industry Co., Ltd., Shandong Jinyu Tire Co., Ltd., Shandong Xinghongyuan Tire Co., Ltd., Anhui Jiatong Passenger Radial Tire Co., Ltd., Wanli Tire Co., Ltd., Fengshen Tire Co., Ltd., Jining Qilu Testing Technology Co., Ltd., Pirelli Tire Co., Ltd., Hankook tire | | Administrative Organization | National Standardization Technical Committee of Tire and Rim (SAC/TC 19) | | Issuing agency(ies) | China Petroleum and Chemical Industry Federation | | Standard ID | GB/T 521-2012 (GB/T521-2012) | | Description (Translated English) | Test method of measuring peripheral dimensions for tyres | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G41 | | Classification of International Standard | 83.160.01 | | Word Count Estimation | 7,748 | | Older Standard (superseded by this standard) | GB/T 521-2003 | | Quoted Standard | GB/T 6326 | | Drafting Organization | Triangle Tyre Co., Ltd. | | Administrative Organization | National Standardization Technical Committee tire rim | | Regulation (derived from) | National Standards Bulletin 2012 No. 17 | | Proposing organization | China Petroleum and Chemical Industry Federation | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the tire (tire, inner tubes and flaps) outer dimensions measuring tools and precision requirements, the measurement conditions, measurement, calculation and data processing, and test reports. This standard applies to all new passen | | Standard ID | GB/T 521-2003 (GB/T521-2003) | | Description (Translated English) | Test method of measuring peripheral dimensions for tyres | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G41 | | Classification of International Standard | 83.160.01 | | Word Count Estimation | 6,671 | | Date of Issue | 2003/11/10 | | Date of Implementation | 2004/6/1 | | Older Standard (superseded by this standard) | GB/T 521-1993 | | Drafting Organization | Beijing Rubber Industry Research and Design Institute | | Administrative Organization | National Standardization Technical Committee tire rim | | Regulation (derived from) | China Announcement of Newly Approved National Standards 2004 No. 1 (No. 63 overall) | | Proposing organization | China Petroleum and Chemical Industry Association | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People Republic of China | | Summary | This Standard specifies tire (tire, inner tubes and flaps) peripheral dimensions of measurement tools and precision measuring conditions, measurement methods, data processing and calculation and meter test report. This Standard is applicable to all new passenger car tires, truck tires, agricultural tires, OTR tires, industrial vehicles pneumatic tires and motorcycle tires. |
GB/T 521-2023
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 83.160.01
CCS G 41
Replacing GB/T 521-2012
Test methods for measuring peripheral dimensions of tyres
ISSUED ON: MARCH 17, 2023
IMPLEMENTED ON: OCTOBER 01, 2023
Issued by: State Administration for Market Regulation;
Standardization Administration of the People's Republic of China.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative references ... 5
3 Terms and definitions ... 6
4 Measurement tools and their accuracy requirements ... 6
5 Measurement conditions ... 6
6 Measurement methods ... 7
7 Data calculation and processing ... 10
8 Test report ... 11
Test methods for measuring peripheral dimensions of tyres
1 Scope
This document describes the measurement methods for peripheral dimensions of
pneumatic tyres (cover tyre, inner tube and pad belt), including measurement tools and
their accuracy requirements, measurement conditions, measurement methods, data
calculation and processing, and test reports.
This document is applicable to passenger car tyres, truck tyres, agricultural tyres,
engineering machinery tyres, industrial vehicle pneumatic tyres, motorcycle tyres,
electric bicycle tyres and cycle tyres.
2 Normative references
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
GB/T 2977, Size designation, dimensions, inflation pressure and load capacity for
truck tyres
GB/T 2978, Size designation, dimensions, inflation pressure and load capacity for
passenger car tyres
GB/T 2979, Size designation, dimensions, inflation pressure and load capacity for
agricultural tyres
GB/T 2980, Size designation, dimensions, inflation pressure and load capacity for
earth-mover tyres
GB/T 2982, Designation, dimensions, inflation pressure and load capacity of
pneumatic tyres for industrial vehicles
GB/T 2983, Series of motorcycle tyres
GB/T 6326, Tyre terms and definitions
GB/T 7377, Series of cycle tyres
GB/T 8170, Rules of rounding off for numerical values and expression and
judgement of limiting values
GB/T 31548, Series of electric bicycle tyres
3 Terms and definitions
For the purposes of this document, the terms and definitions defined in GB/T 6326
apply.
4 Measurement tools and their accuracy requirements
4.1 Tyre pressure gauge:
- ±5 kPa; the measured air pressure is 500 kPa and below;
- ±10 kPa; the measured air pressure is above 500 kPa.
4.2 Steel ruler and metal tape measure (without curvature): ±1 mm.
4.3 Vernier caliper: ±0.1 mm.
4.4 Pattern depth gauge: ±0.02 mm.
4.5 Thickness gauge: ±0.01 mm.
4.6 Calipers.
4.7 Non-contact measuring instruments (such as laser measuring instruments): ±0.02
mm.
5 Measurement conditions
5.1 After the tyre is vulcanized, it shall be parked at room temperature for at least 24 h.
Before inflating, it shall be parked at a temperature of 18℃ ~ 36℃ for at least 3 h. If
necessary, clean the measurement position on the tyre surface before measurement.
Trim vent beard and molding bead.
5.2 Tubeless tyres shall be mounted on rims for tubeless tyre measurements. Inflate
according to 5.3. In order to make the tyre bead and rim fit in place, the inflation
pressure can be increased appropriately under the premise of ensuring safety. After the
bead is on and in place, adjust to the specified air pressure. Tyres with inner tubes
(including cover tyres, inner tubes, and pad belts if required) shall be installed on the
rims for measuring tyres with inner tubes. Inflate according to 5.3.
5.3 Inflate the tyre to the inflation pressure specified in Table 1.
Keys:
a - pattern depth gauge.
Figure 2 -- Schematic diagram of measuring tyre groove depth
6.4 Tread wear mark height
At the parts corresponding to at least 4 tread wear marks, measure the groove depth of
each point and the height of the tread wear marks at each corresponding point from the
tread (measure at least 3 places for motorcycle tyres and electric bicycle tyres). When
measuring with a pattern depth gauge, the pattern depth gauge shall be kept
perpendicular to the bottom of the pattern groove. When measuring the height of the
tread wear mark from the tread, the pattern depth gauge shall be kept perpendicular to
the upper plane of the tread wear mark and aligned with the middle position of the wear
mark. When measuring with a non-contact measuring instrument, the measuring
instrument shall be kept level with the groove and aligned with the middle position of
the wear mark.
6.5 Pad belt thickness
Use a thickness gauge to measure the thickness of the middle part of the pad belt and
the place less than or equal to 1mm from the edge of the pad belt. The thickened part of
the valve hole shall be avoided. Measure 4 points on the four equal parts of the
circumference of the pad belt, respectively.
6.6 Flattened width of the pad belt
After flattening the inner tube contact surface of the pad belt outward, use a steel ruler
to measure its width. Measure about 4 points in quarters.
6.7 Outer circumference of inner tube
Let the inner tube stand for 2 h after exhausting the air. After placing it on a flat surface
and folding it into a semicircle, use a tape measure to measure its outer half
circumference. The resulting value is multiplied by 2, which shall be the outer
circumference of the inner tube.
6.8 Flat-folded section width of inner tube
Flatten the cross section with a steel ruler. Measure the width at four quarters along the
circumference of the inner tube.
7 Data calculation and processing
7.1 Outside diameter of tyre
The outer diameter of the tyre is calculated according to formula (1):
Where,
D - outer diameter of the tyre, in millimeters (mm);
L - outer circumference of the tyre, in millimeters (mm);
π - circumference ratio, taking 3.1416.
The data of the outer diameter of the tyre shall be rounded to an integer according to
GB/T 8170.
7.2 Overall tyre width, section width, tyre groove depth, pad belt thickness,
flattened width of pad belt
The overall width of the tyre is the maximum value of each measuring point. The
arithmetic mean value of each measurement point is taken as the width of the section
and the flattened width of the pad belt. The unit is millimeters. The above parameters
of electric bicycle tyres and cycle tyres are rounded to one decimal place according to
GB/T 8170. Others are rounded to integers according to GB/T 8170.
The arithmetic mean value of each measurement point is taken as the tyre groove depth
and pad belt thickness. The unit is millimeters. Round off to one decimal place
according to GB/T 8170.
7.3 Height of tread wear marks
The height of the tread wear mark is calculated according to formula (2):
Where,
......
GB/T 521-2012
GB
ICS 83.160.01
G 41
Replacing GB/T 521-2003
Test Method of Measuring Peripheral
Dimensions for Tyres
ISSUED ON. JULY 31, 2012
IMPLEMENTED ON. FEBRUARY 1, 2013
Jointed issued by. General Administration of Quality Supervision,
Inspection and Quarantine (AQSIQ);
Standardization Administration (SAC) of the People’s
Republic of China.
Table of Contents
Foreword ... 3
1. Scope ... 4
2. Normative References ... 4
3. Terms and Definitions ... 4
4. Measuring Tools and Their Accuracy Requirements ... 4
5. Measurement Conditions ... 5
6. Measuring Method ... 5
7. Data Calculation and Processing ... 7
8 Test Report ... 8
Foreword
This Standard is drafted according to the rules specified in GB/T 1.1-2009.
This Standard replaces B/T 521-2003 "Test Method of Measuring Peripheral
Dimensions for Tyres".
The main differences between this Standard and GB/T 521-2003 are as follows.
- Add the requirement of "corresponding rim is installed when the tubeless tyre
and tube-tyre are tested" (see 5.2);
- "Standard rim" is changed into "test rim" (see 5.2);
- Add 3 requirements relating to height measurement of motor tyre tread wear
indicators (see 6.4);
- Add the requirements of flatten mode of flap (see 6.6).
This Standard was proposed by China Petroleum and Chemical Industry Association.
This Standard shall be under the jurisdiction of National Technical Committee 19 on
Tyres and Rims of Standardization Administration of China (SAC/TC 19).
Chief drafting organizations of this Standard. Triangle Tyre Co., Ltd., Hangzhou
Zhongce Rubber Co., Ltd., Sailun Co., Ltd., Beijing Research and Design Institute of
Rubber Industry, Shandong Linglong Tyre Co., Ltd., Shanghai Shuangqian Group Co.,
Ltd., and Xiamen Zhengxin Rubber Industry Co., Ltd.
Chief drafting staffs of this Standard. Liang Jinzhao, Chen Guohua, Wang Xiaoju,
Wang Kesheng, Xu Lihong, Chen Shaomei, Li Bowei, and Luo Zhaoyu.
The previous editions replaced by this Standard are as follows.
- GB/T 521-1965;
- GB/T 521-1984;
- GB/T 521-1993;
- GB/T 521-2003.
Test Method of
Measuring Peripheral Dimensions for Tyres
1. Scope
This Standard specifies the measuring tools and their accuracy requirements,
measurement conditions, measuring methods, data calculation and processing and
test report of overall circumference of tyre (cover tyre, inner tube and flap).
This Standard is applicable to all new passenger car tyres, truck tires, agricultural
tyres, earth-mover tyres, industrial vehicle pneumatic tyres and motorcycle tyres.
2. Normative References
The following document is essential for the application of this Standard. For dated
references, only the edition cited applies. For undated references, the latest edition
(including any amendments) is applicable to this document.
GB/T 6326 Tyre Terms and Definitions
3. Terms and Definitions
For the purpose of this Standard, the terms and definitions defined in GB/T 6326
apply.
4. Measuring Tools and Their Accuracy Requirements
4.1 Tyre pressure gauge. 10kPa.
4.2 Steel ruler and metallic tape (without radian). 1 mm.
4.3 Vernier caliper. 0.1 mm.
4.4 Tread pattern depth gauge. 0.02 mm.
4.5 Thickness gauge. 0.01 mm.
4.6 Caliper.
L - the overall circumference of tyre, mm;
π - the circumference ratio, 3.14 for it.
The result of overall diameter data of tyre shall be rounded off to integer.
7.2 Width of tire section, depth of tyre groove , width of flatting flap and
thickness of flap
Arithmetic mean of all measuring points shall be taken as the width of tyre section.
And width of flatting flap, the unit is mm, rounded off to integer.
Arithmetic mean of all measuring points shall be taken as the width of tyre groove.
And width of flap, the unit is mm, rounded off to one decimal point.
7.3 Height of tread wear indicators
Height of tread wear indicators shall be calculated according to Formula (2).
DPR = DP — HP (2)
Where,
DPR - the height of tread wear indicators, mm;
DP - the depth of groove, mm;
Hp - the height of tread wear indicators away tread, mm.
The arithmetic mean of all points shall be taken and rounded off to one decimal point.
7.4 Overall circumference and flat width of inner tube
For the measured value of overall circumference and flat width of inner tube, its unit is
mm and it shall be rounded off to integer.
Arithmetic mean of the values measured at 4 points shall be taken as the flat width,
rounded off to integer.
8 Test Report
Test report shall include the following contents.
a) Manufacturer's name, brand, tyre size and production No.;
b) Tire load index or maximum load or ply rating, test air pressure;
c) Overall circumference, overall diameter and section width of tyre;
d) Groove depth and height of tread wear indicators of tyre;
e) Thickness of flap and width of flatting flap;
f) Overall circumference and flat width of inner tube;
g) Measuring rim;
h) Test conditions and testing data.
......
|