GB/T 5167-2018_English: PDF (GB/T5167-2018)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 5167-2018 | English | 119 |
Add to Cart
|
3 days [Need to translate]
|
Sintered metal materials and hard metals -- Determination of electrical resistivity
| Valid |
GB/T 5167-2018
|
| GB/T 5167-1985 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Sintered metal materials and hardmetals. Determination of electrical resistivity
| Obsolete |
GB/T 5167-1985
|
| Standard ID | GB/T 5167-2018 (GB/T5167-2018) | | Description (Translated English) | Sintered metal materials and hard metals -- Determination of electrical resistivity | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | H21 | | Classification of International Standard | 77.160 | | Word Count Estimation | 6,653 | | Date of Issue | 2018-09-17 | | Date of Implementation | 2019-06-01 | | Older Standard (superseded by this standard) | GB/T 5167-1985 | | Drafting Organization | Institute of Powder Metallurgy, Central South University, Shenzhen Yingcheng Technology Co., Ltd., Institute of Nonferrous Metals Technology and Economy | | Administrative Organization | National Nonferrous Metals Standardization Technical Committee (SAC/TC 243) | | Proposing organization | China Nonferrous Metals Industry Association | | Issuing agency(ies) | State Administration of Markets and China National Standardization Administration | | Standard ID | GB/T 5167-1985 (GB/T5167-1985) | | Description (Translated English) | Sintered metal materials and hardmetals. Determination of electrical resistivity | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | H21 | | Classification of International Standard | 77.04 | | Word Count Estimation | 2,251 | | Date of Issue | 1985/5/8 | | Date of Implementation | 1986/2/1 | | Drafting Organization | Central South Institute of Mining and Metallurgy Powder Metallurgy Institute | | Proposing organization | The Ministry of Metallurgical Industry of the People Republic of China, China Nonferrous Metals Industry Corporation | | Issuing agency(ies) | National Bureau of Standards | | Summary | This standard specifies the determination of sintered metal materials and carbide resistivity. Including the two measurement processes. An accuracy within 0. 30% for the accurate determination of the basic characteristics of the material measure; a lower accuracy measurements for quality control of industrial production. |
GB/T 5167-2018
Sintered metal materials and hardmetals - Determination of electrical resistivity
ICS 77.160
H21
National Standards of People's Republic of China
Replace GB/T 5167-1985
Determination of resistivity of sintered metal materials and cemented carbides
Published on.2018-09-17
2019-06-01 implementation
State market supervision and administration
China National Standardization Administration issued
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 5167-1985 "Determination of resistivity of sintered metal materials and cemented carbides".
Compared with GB/T 5167-1985, the main technical contents of this standard are changed as follows.
--- Added Chapter 1 "Scope";
--- Added Chapter 2 "Regular References";
--- Remove the terminology description for the 1985 version;
--- Chapter 4 "Instruments" increases the range and accuracy requirements of vernier calipers, lever micrometers, thermometers, precision balances;
--- Chapter 6, "Measurement Results and Calculations" adds "mass resistivity" and "unit length resistance";
--- Chapter 7 "Temperature Correction" was changed to "Correction of Resistance Value";
--- Chapter 8, "Test Report" optimizes and supplements related content.
This standard was proposed by the China Nonferrous Metals Industry Association.
This standard is under the jurisdiction of the National Nonferrous Metals Standardization Technical Committee (SAC/TC243).
This standard is drafted by. Institute of Powder Metallurgy, Central South University, Shenzhen Yingcheng Technology Co., Ltd., Nonferrous Metals Technology
Research Institute.
The main drafters of this standard. Huang Zhifeng, Yu Shenglin, Zhang Yue, Zheng Lingzhi, Mo Zikai.
The previous versions of the standards replaced by this standard are.
---GB/T 5167-1985.
Determination of resistivity of sintered metal materials and cemented carbides
1 Scope
This standard specifies the determination of the electrical resistivity of sintered metal materials and cemented carbides.
This standard applies to the following two methods for determining the electrical resistivity of sintered metal materials and cemented carbides.
a) A measurement accuracy of less than 0.30%, suitable for accurate determination of the basic properties of the material;
b) A low measurement accuracy for quality control in industrial production processes.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 1216 outer diameter micrometer
GB/T 3850 dense sintered metal material and method for determination of density of cemented carbide
GB/T 21389 cursor, table and digital caliper
3 sample
3.1 The specimen may be a rod, strip or profile, and its diameter, thickness, width or other dimensions shall be compatible with the measuring range of the selected instrument, and
The surface should be uniform and the cross-sectional area should not change by more than 0.75%.
3.2 The resistance within the length of the sample measurement shall be not less than 0.00001 Ω. For accurate measurement, the sample shall be ground and polished to a diameter of 6.4 mm.
The length is 254mm; for general measurement, the distance of the potential contact of the sample should be not less than 12.70mm, and the cross section is uniform.
3.3 The surface of the sample shall be free of scale, dirt and oil. There shall be no cracks or defects. The test shall not allow overlap and weld.
4 instruments
4.1 When the sample resistance is less than 1Ω, measure the resistance with the Calvin double-arm bridge; when the sample resistance is 1Ω or more, use the Wheatstone bridge
Measure the resistance.
4.2 Vernier caliper. (1000 ± 0.1) mm, should meet the requirements of GB/T 21389. Lever micrometer. the indication error of the meter does not exceed
1μm, should meet the requirements of GB/T 1216.
4.3 Thermometer. The indication error does not exceed 0.1 °C.
4.4 Precision balance. The division value is 0.1mg.
5 measurement process
5.1 Measuring the length and quality of the sample, the measurement error of the instrument used is not more than ± 0.05%. In order to ensure the accuracy requirements of the measurement length,
The potential contact should have a sharp edge. When it is in contact with the potential contact of the sample, it should have a proper clamping force to ensure stable and reliable contact.
5.2 When measuring the cross-sectional area of the sample, the cross-sectional area is measured 5 times or more in equidistant distance within the gauge length of the sample, and the average value is taken. test
The sample size does not change by more than 0.10%. If the sample size is less than 2.54mm and the measurement accuracy does not meet the specified accuracy requirements, the sample is cut off.
......
|