GB/T 467-2010 PDF English
US$85.00 · In stock · Download in 9 secondsGB/T 467-2010: Copper cathode Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 467: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 467-2010 | English | 85 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Copper cathode
| Valid |
| GB/T 467-1997 | English | 279 |
Add to Cart
|
3 days
|
Copper cathode
| Obsolete |
| GB/T 467-1982 | English | RFQ |
ASK
|
3 days
|
Electrolytic copper
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 467-2010
GB/T 467-2010: Copper cathode---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT467-2010
GB
NATIONAL STANDARD
ICS 77.150.30
H 62
Replacing GB/T 467-1997
Copper cathode
Issued on. JANUARY 10, 2011
Implemented on. OCTOBER 01, 2011
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China;
Standardization Administration of the People's Republic of
China.
Table of Contents
Foreword... 3
1 Scope... 5
2 Normative references... 5
3 Requirements... 5
4 Test method... 7
5 Inspection rules... 8
6 Marking, packaging, transportation, storage and quality certificates... 10
7 Contract (or order) content... 11
Foreword
This standard was drafted in accordance with the rules given in GB/T
1.1-2009.
In this standard, grade A copper (Cu-CATH-1) equivalently adopts the impurity
limit of the designation (Cu-CATH-1) in EN 1978.1998 “Copper and copper
alloys - Copper cathode”. The N.1 standard copper (Cu-CATH-2) modifies and
adopts the impurity limit of the designation Grade2A in ASTM B 115-00 (R2004)
“Electrolytic copper cathode”; AND the No.2 standard copper (Cu-CATH-3)
modifies and adopts the impurity limit of the designation Cu-CATH-2 in EN
1978.1998 “Copper and copper alloy - copper cathode”.
As compared with EN 1978.1998 and ASTM B 115-00 (R2004), the differences
of this standard are as follows.
- The limit of bismuth in standard copper (Cu-CATH-2) is ≤ 0.0005%, which
is higher than that in designation Grade 2A (≤ 0.0003%) in ASTM B 115-00
(R2004). The limit of lead is ≤ 0.002%, which is lower than that in the
designation Grade 2A (≤ 0.0040%). It does not consider the selenium,
tellurium, and silver. The limit of phosphorus is increased, BUT the rest
limit indicators are the same;
- The bismuth and lead in No.2 standard copper (Cu-CATH-3) equivalently
adopt the limit of the designation Cu-CATH-2 in EN 1978.1998; AND the
silver equivalently adopts the limit of the designation Cu-CATH-1.
This standard replaces GB/T 467-1997 “Copper cathode”. As compared with
the original standard, the main changes are as follows.
- ADD the designation No.2 standard copper (Cu-CATH-3);
- ADD the specifications on the physical performance indicators AND the
mass resistivity;
- MAKE unified specification on the surface quality;
- As for the copper cathode chemical composition analysis method, ADD the
YS/T 464 “Methods for analytical of copper cathode – The optical emission
spectrometry”;
- ADD the copper cathode production sampling and sample preparation
method.
This standard shall be under the jurisdiction of the National Nonferrous Metals
Standardization Committee (SAC/TC 243).
The responsible drafting organizations of this standard. Jiangxi Copper Co.,
Ltd., China Nonferrous Metals Industry Standard Measurement Quality
Institute.
The participating drafting organizations of this standard. Daye Nonferrous
Metals Company, Tongling Nonferrous Metals Group Holdings Co., Ltd.,
Yunnan Copper Co., Ltd., Jinchuan Group Co., Ltd., Zijin Mining Group Co.,
Ltd., Yanggu Xiangguang Copper Co., Ltd., Co., Ltd., North Copper Co., Ltd.
The main drafters of this standard. Wu Yiwei, Li Baodi, Long Ziping, Zhao
Yongshan, Huang Mingjin, Huang Hongwei, Cheng Tong, Tu Lixin, Wu
Wenming, Wu Zhiqing, Lu Weiming, Liao Zhanpi, Zhou Songlin, Zhang
Guanghua, Yan Hong, Zhang Yonghong, Li Jiasheng.
This Standard replaces the standard previously issued as follows.
- GB/T 467-1997;
- GB/T 13585-1992;
- GB/T 467-1982.
Copper cathode
1 Scope
This standard specifies the requirements, test methods, inspection rules,
marking, packaging, transportation, storage, quality certificate, and contract (or
order) contents of the copper cathode.
This standard applies to copper cathode produced by electrolytic refining or
electrolytic deposition. AND it is usually used in remelting.
2 Normative references
The following documents are essential to the application of this document. For
the dated documents, only the versions with the dates indicated are applicable
to this document; for the undated documents, only the latest version (including
all the amendments) are applicable to this Standard.
GB/T 351 Metallic material – Resistivity measurement method
GB/T 5121 (all parts) Methods for chemical analysis of copper and copper
alloys
GB/T 8170 Rules for rounding off for numerical values & expression and
judgement of limiting values
3 Requirements
3.1 Product classification
The copper cathode is divided into three designations in accordance with
chemical compositions. grade A copper (Cu-CATH-1), No.1 standard copper
(Cu-CATH-2), AND No.2 standard copper (Cu-CATH-3).
3.2 Chemical composition
3.3 Physical properties
If the purchaser has special requirement for the electrical performance AND
indicated in the contract, it may perform the mass resistivity test.
The grade A copper mass resistivity ≤ 0.15176 Ωg/m2, AND the No.1 and No.2
standard copper mass resistivity ≤ 0.15328 Ωg/m2.
3.4 Surface quality
3.4.1 The copper cathode surface shall be clean, AND be free from sludge, oil
stain, electrolytic residue, or other foreign debris.
3.5 Other requirements
3.5.1 Copper cathode shall be supplied in whole piece. If the purchaser has
special requirement, it may be negotiated with the supplier.
4 Test method
4.1 Analysis of chemical composition of copper cathode is performed in
accordance with the requirements of GB/T 5121 and YS/T 464.AND the
arbitration analysis method is GB/T 5121.
5 Inspection rules
5.1 Inspection and acceptance
5.1.1 The product shall be inspected by the technical supervision department
of the supplier, to ensure that the product quality complies with the provisions
of this standard or the contract (or the order form), AND meanwhile fill in the
quality certificate.
5.2 Batching
The product shall be submitted in batches, AND each batch is composed of the
copper cathode of the same designation produced from the same day and the
same circulation system. AND the mass of a batch shall not exceed 500 t.
5.3 Copper cathode sampling and sample preparation method
5.3.1 Production sampling method
Copper cathode sampling is made through the drilling machine, OR otherwise
by the punch.
5.3.2 Arbitration sampling method for copper cathode
5.3.2.1 Randomly TAKE 24 bundles from each batch of copper cathode;
randomly TAKE one block from each bundle; NUMBER them in the order of
natural number.
5.3.2.6 In the process of melting, it shall avoid the intrusion of oxygen.
5.3.2.7 After removing the surface of the ingot, USE a carbide cutting tool for
drilling, milling or sawing (to avoid oxidization due to overheating) to take
sample. OBTAIN the fine cuttings more than 600 g; carefully MIX the fine
cuttings uniformly; USE the magnet to remove the iron which may be brought
in during processing; REDUCE the sample which is removed of iron into four
sets (not less than 150 g for each set); one set for the analysis by the supplier,
one set for the analysis by the purchaser, one set of the arbitration analysis,
5.4 Determination of test results
5.4.1 The numerical results of the test results shall be rounded off and
determined in accordance with the provisions of GB/T 8170.
6 Marking, packaging, transportation, storage and quality certificates
6.1 Copper cathode shall be packaged by the high strength materials which
are not easy to produce pollution into bundles of such mass as suitable for
handling. However, it may also not be packaged if agreed between the supplier
and the purchaser.
6.2 Each bundle of copper cathode must have a clear marking, specifying.
6.3 Transportation and storage
During transportation and storage, it shall not contaminate the product.
6.4 Each batch of copper cathode shall be accompanied by a quality certificate,
indicating.
7 Contract (or order) content
The following items shall be included in the order form of the products as listed
in this standard.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 467-2010 be delivered?Answer: The full copy PDF of English version of GB/T 467-2010 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 467-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 467-2010_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 467-2010 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 467-2010?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 467-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 467-2010?A step-by-step guide to download PDF of GB/T 467-2010_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 467-2010".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|