GB/T 4459.5-1999 PDF English
US$100.00 · In stock · Download in 9 secondsGB/T 4459.5-1999: Mechanical drawings. Representation of centre holes Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureGB/T 4459.5: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 4459.5-1999 | English | 100 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Mechanical drawings. Representation of centre holes
| |
| GB/T 4459.5-1984 | English | 199 |
Add to Cart
|
2 days
|
Mechanical drawings--Simplified representation of centre holes
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 4459.5-1999
GB/T 4459.5-1999: Mechanical drawings. Representation of centre holes---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT4459.5-1999
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 01.100.30
J 04
eqv ISO 6411:1982
Replacing GB/T 4459.5-1984
Mechanical drawings - Representation of centre holes
ISSUED ON: SEPTEMBER 03, 1999
IMPLEMENTED ON: MARCH 01, 2000
Issued by: State Bureau of Quality and Technical Supervision
Table of Contents
Forward ... 3
ISO Foreword ... 4
1 Scope ... 5
2 References ... 5
3 Symbols of centre holes ... 5
4 Designation of centre holes ... 6
5 Representation of centre holes ... 8
Annex A (informative) Relevant dimensions on drawings for type R, A, B and C
centre holes ... 10
Annex B (Informative) Proportions and dimensions of symbols of centres holes
... 11
Forward
This Standard is drafted in accordance with ISO 6411:1982 “Technical drawings
- Simplified representation of centre holes”. It is equivalent to the international
standard.
This Standard revises and replaces GB/T 4459.5-1984 “Mechanical drawings -
Representation of centre holes”, which makes the representation of centre
holes consistent with that in the international standard, to meet the needs of
international trade, technology and economic exchanges.
The representation of centre holes is a special representation in mechanical
drawings. This Standard supplements the following main contents as needed:
1. ADD the designation and representation of type C centre holes.
2. ADD the simplified representation, omitting the standard code in the
designation of centre holes.
3. For the convenience of selection, the parameter code in Table A1 of Annex
A adopts the provisions of GB/T 145, that is, D replaces the pilot diameter
d specified in ISO 6411, D1 replaces the tapered hole’s end face diameter
D1 (type R), D2 (type A) and D3 (type B) specified in ISO 6411.
Annex A and Annex B of this Standard are informative annex.
This Standard was proposed by State Bureau of Machinery Industry.
This Standard shall be under the jurisdiction of National Technical Committee
on Technical Drawings of Standardization Administration of China.
Drafting organizations of this Standard: Machinery Standardization Institute,
Chongqing Machine Manufacturing School, Dalian Bohai Riping Machine Tool
Co., Ltd.
Main drafters of this Standard: Qiang Yi, Yang Dongbai, Chen Shuguo, Hou
Ying, Huang Ju, Lai Jianguo.
Mechanical drawings - Representation of centre holes
1 Scope
This Standard specifies the representation of centre holes.
This Standard applies to standardized centre holes when it is not necessary to
show the exact form and structure in mechanical drawings. Centre holes other
than standardized centre holes may also refer to this Standard.
2 References
The following standards contain provisions which, through reference in this
Standard, constitute provisions of this Standard. At the time of publication, the
editions indicated are valid. All standards are subject to revision. The parties
who are using this Standard shall explore the possibility of using the latest
version of the following standards.
GB/T 145-1985 Center holes (validated in 1999)
GB/T 10609.4-1989 Technical drawings - Requirements for microcopying
(validated in 1999)
GB/T 14691-1993 Technical drawings - Lettering
GB/T 17450-1998 Technical drawings - Basic conventions for lines
3 Symbols of centre holes
3.1 Requirements
On technical drawings, generally there are three different requirements on
whether centre holes are remained in the finished part:
a) centre hole is required on the finished part;
b) centre hole may remain on the finished part;
c) centre hole shall not exist on the finished part.
3.2 Symbols
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 4459.5-1999 be delivered?Answer: The full copy PDF of English version of GB/T 4459.5-1999 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 4459.5-1999_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 4459.5-1999_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 4459.5-1999 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 4459.5-1999?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 4459.5-1999 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 4459.5-1999?A step-by-step guide to download PDF of GB/T 4459.5-1999_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 4459.5-1999".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|