|
US$529.00 ยท In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 43565-2023: Basketball court with synthetic surfaces for primary and middle schools
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 43565-2023 | English | 529 |
Add to Cart
|
5 days [Need to translate]
|
Basketball court with synthetic surfaces for primary and middle schools
| Valid |
GB/T 43565-2023
|
PDF similar to GB/T 43565-2023
Basic data | Standard ID | GB/T 43565-2023 (GB/T43565-2023) | | Description (Translated English) | Basketball court with synthetic surfaces for primary and middle schools | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Y55 | | Classification of International Standard | 03.180 | | Word Count Estimation | 26,249 | | Date of Issue | 2023-12-28 | | Date of Implementation | 2024-07-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 43565-2023: Basketball court with synthetic surfaces for primary and middle schools---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 03:180
CCSY55
National Standards of People's Republic of China
Synthetic surface basketball courts for primary and secondary schools
Published on 2023-12-28
2024-07-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration Committee
Table of contents
Preface III
Introduction IV
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Venue Classification 3
5 Requirements 3
5:1 Design Principles 3
5:2 Site Basics 4
5:3 Paving 4
5:4 Appearance 4
5:5 Specification marking 4
5:6 Flatness 6
5:7 Slope 6
5:8 Site thickness 7
5:9 Physical and mechanical properties 7
5:10 Aging resistance 7
5:11 Inorganic filler content in synthetic material surface layer 7
5:12 Limits of harmful substances and odor in finished products and raw materials of synthetic materials 7
5:13 Total amount of polymers in solid raw materials for synthetic material surface layer 7
5:14 Signage 8
6 Test methods 8
6:1 Basics 8
6:2 Paving 8
6:3 Appearance 8
6:4 Specification marking 8
6:5 Flatness 9
6:6 Slope 9
6:7 Thickness 9
6:8 Physical and mechanical properties of finished synthetic basketball court ground floor 9
6:9 Aging resistance10
6:10 Inorganic filler content 10
6:11 Hazardous substance limits and odor10
6:12 Total polymer content 10
6:13 Signs 10
7 Sampling 11
7:1 Witness Sampling 11
7:2 Raw material sampling 11
7:3 Site ground sampling 11
7:4 Transportation, storage and testing time11
8 Inspection Rules 12
8:1 Admission inspection12
8:2 Acceptance inspection12
8:3 Type inspection 12
8:4 Judgment of inspection results 12
8:5 Retest rules 12
8:6 Principles for determining site compliance12
9 Maintenance12
Appendix A (informative) Basketball court infrastructure and construction 14
Appendix B (informative) Selection of solid raw materials for paving 16
B:1 Requirement 16
B:2 Test method 17
Appendix C (informative) Selection of non-solid raw materials for paving 19
C:1 Hazardous substance limits and odor requirements19
C:2 Test method 19
Reference 20
Figure 1 Schematic diagram of the standard basketball court markings for primary and secondary schools 5
Figure 2 Schematic diagram of the small basketball court line drawing 6
Figure 3 Example of synthetic material surface basketball court sign 8
Table 1 Physical and mechanical properties of synthetic material surface layer 7
Table 2 C10-C13 and MOCA content requirements in finished synthetic material surface layers 7
Table 3 Sampling requirements for testing samples11
Table A:1 Basketball court infrastructure construction practices 14
Table B:1 Thickness and physical and mechanical properties of base film (block material) for semi-prefabricated composite surface layer 16
Table B:2 Limits of hazardous substances in solid raw materials16
Table C:1 Limits and odors of hazardous substances in non-solid raw materials19
Foreword
This document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents"
Drafting:
Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents:
This document is proposed by the Ministry of Education of the People's Republic of China:
This document is under the jurisdiction of the National Technical Committee for Standardization of Educational Equipment (SAC/TC125):
This document was drafted by: Educational Technology and Resource Development Center of the Ministry of Education (Central Audio-visual Education Center), China National Testing and Testing Holdings Group Co:, Ltd:
Co:, Ltd:, Dubaicheng New Material Technology (Shanghai) Co:, Ltd:, Guangzhou Tongxin Sports Co:, Ltd:, Taishan Sports Industry Group Co:, Ltd:
Division, Guangdong Jierui New Materials Co:, Ltd:, Wanhua Chemical Group Co:, Ltd:, Shanghai Jianke Inspection Co:, Ltd:, Guangzhou Quality Supervision and Inspection
Research Institute, Jiangsu Provincial Product Quality Supervision and Inspection Research Institute, Zhejiang Provincial Light Industrial Product Quality Inspection Research Institute, Shandong Provincial Product Quality Inspection Research Institute
Institute, Shenzhen Institute of Metrology and Quality Inspection, Tsinghua University, Guangdong Chuanao High-tech Co:, Ltd:, McGrady Artificial Turf Co:, Ltd:,
Jiangsu Zhongzheng Testing Co:, Ltd:, Shanghai Hangkuan Stadium Facilities Engineering Co:, Ltd:, Beijing Normal University, China Academy of Environmental Sciences,
Radio and Television Measurement and Inspection Group Co:, Ltd:, Qingdao Kexing Educational Equipment Co:, Ltd:, Shandong Donghai Group Co:, Ltd:, Jiangsu Changnuo Sports
VENUE NEW MATERIALS LIMITED:
The main drafters of this document: Zhang Yaodong, Guo Zhongbao, Zhu Xiaocui, Dang Jianwei, Che Yanping, Zhan Jincheng, Lin Fanqiu, Chen Chen, Cai Chenmin,
Bian Zhiyong, Huang Yuliang, Jin Yanli, Zhang Pengyi, Sun Zhen, Wang Sen, Han Xiaolei, Chen Shao, Li Qiannan, Wang Qiangqiang, Yang Xuejun, Huang Huangfei, Wu Haitao,
Yu Ruozhen, Zhao Keqin, Qian Jun, Yin Shuyi, Yu Xun, Meng Qingsheng, Tian Guangchao, Wang Maoqi, Pan Chaoyang, Shen Zujian, Zhao Xiang, Yan Zongliang:
Introduction
This document is a supporting standard for the mandatory national standard GB 36246-2018 "Synthetic Material Surface Sports Venues for Primary and Secondary Schools": It is aimed at primary and secondary schools:
The design, site foundation, paving, appearance, specification lines, flatness, slope, thickness, physical and mechanical properties of synthetic material surface basketball courts,
Standard requirements are put forward for weathering and aging resistance: These requirements are essential and crucial to effectively guarantee the performance of the basketball court:
It will help further standardize the quality of basketball courts in primary and secondary schools and help comprehensively improve school running conditions:
Provide technical support to strengthen the overall quality and cultivate socialist builders and successors with comprehensive development of moral, intellectual, physical, artistic and labor development:
Synthetic surface basketball courts for primary and secondary schools
1 Scope
This document gives the classification of synthetic surface basketball courts for primary and secondary schools and stipulates the requirements, sampling requirements, inspection rules and maintenance
maintenance, and the corresponding test methods are described:
This document applies to the design, construction and construction of outdoor cast-in-place surface and prefabricated surface basketball courts that are newly built, renovated and expanded in primary and secondary schools:
acceptance:
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations
For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to
this document:
GB/T 3516 Determination of rubber solvent extractables
GB/T 14833 Synthetic sports ground floor
GB/T 15905-1995 Humid heat aging test method for vulcanized rubber
GB/T 16422:2-2022 Plastic laboratory light source exposure test methods Part 2: Xenon arc lamp
GB/T 19995:2 Natural material sports venues use requirements and inspection methods Part 2: Comprehensive sports venues wooden floor venues
GB 36246 Primary and secondary school synthetic material surface sports venues
JB/T 12202 wedge feeler gauge
JGJ146 Construction site environment and health standards for construction projects
JTG3450 Highway subgrade pavement field testing procedures
QB/T 2443 steel tape measure
3 Terms and definitions
The terms and definitions defined in GB 36246 and the following apply to this document:
3:1
synthetic surface
A layer of polymer synthetic material paved on a base layer such as asphalt concrete or cement concrete:
Note: The synthetic surface layer mainly includes cast-in-place surface layer, prefabricated surface layer and artificial grass surface layer:
[Source: GB 36246-2018, 3:1, with modifications]
3:2
in-situcastingsurface
The surface layer of the pavement is poured on-site using polymer raw materials and other raw materials:
Note: The cast-in-place surface layer is divided into a permeable surface layer and a non-permeable surface layer: The non-permeable surface layer is further divided into a composite surface layer, a mixed surface layer and a fully plastic surface layer:
[Source: GB 36246-2018, 3:2, with modifications]
3:3
permeable surface
It has a pore structure: In addition to surface runoff, water also flows through the surface layer of the synthetic material surface layer:
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 43565-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 43565-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 43565-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 43565-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|